> Show Room
> Upender and Tilter
Hydraulic upender platforms can handle a wide variety of load configurations, including long loads such as paper rolls, or other loads that are significantly longer than their width or diameter.
The upender is designed for evenly distributed concentrated loads. If the load is lifted on either side or end of the platform, the static edge will reduce capacity.
The Fhope upender transport is fully assembled and ready for installation. If the unit is a pit installation, a properly sized pit should be prepared before moving the unit into position. (Contact factory for instructions on pit size, etc.)
Care should be taken to place the hoist in the factory. It should be placed on a level, dry floor and subjected to the appropriate strength to withstand the weight and load of the equipment. There should be enough room to allow the unit to be loaded and unloaded using cranes and forklift trucks. Consideration should also be given to the placement of the power cable and control box cord. If the cable is accidentally cut, it will cause serious personal injury and death. Sufficient overhead clearance should be provided so that the maximum potential load can be freely rotated.
Upender/tilter + coil wrapping machine
Upender/tilter + track
Hydraulic upender/tilter for steel coil
Steel coil transfer car