Long Shape Package Bag Packing and Shrinking Machine for Wood Strips, Decorative Trims & Aluminum Profiles

Executive summary

The video shows a long-shape bag packing and shrinking line. A long bundle is wrapped in film, then passes through a heat shrink tunnel. The result is a tight, protective package for long products.

What the video shows

The video is a factory demonstration with background music and no narration. All descriptions below are based on visual observation of the footage, sampled frame by frame.

1. Wrap

• A long bundle of light-colored wooden planks is fed into a vertical shrink wrapping machine.
• The machine applies and seals plastic film around the bundle.

2. Shrink

• The wrapped bundle moves on a green conveyor into a long enclosed heat shrink oven.
• The oven has multiple motors and a blue perforated top panel.

3. Exit

• The bundle emerges fully shrink-wrapped and compacted.
• A worker removes the finished bundle.

Direct observation notes (from the frame analysis)

• Wrapping machine: off-white or light gray metal, film roll, sealing mechanism, control panel.
• Shrink tunnel: long enclosed oven with heating elements, motors, and a blue perforated top.
• Conveyor: green belt with a metal frame on wheels.
• Product: long bundle of light-colored wooden planks.
• Process: wrap → seal → heat shrink → exit.
• People: a worker removes the finished bundle.

What the video does not show

• Rated bundle length, width, height, or weight.
• Film type, thickness, width, or roll size.
• Cycle time per bundle.
• Model numbers, power requirements, or certifications.
• Maintenance requirements.

Why long-shape packages need shrink wrapping

Long products are awkward to wrap by hand. Shrink wrapping solves both problems:

The video shows the complete line in action.

Frequently asked questions

What bundle sizes can the line handle? The wrapping machine and tunnel set the usable range. Confirm the maximum bundle length, width, and height.

Is the shrink temperature adjustable? Temperature affects film tightness and speed. Ask for the adjustable range and saved settings.

Can the line handle different products? The design suits planks, boards, profiles, and long packages. Confirm your product range with the manufacturer.

What maintenance does the line need? Typical checks cover the film feed, sealing unit, and heating elements. Request the maintenance schedule and spare-parts list.

Common mistakes to avoid

• Oversized bundles. A bundle too large for the tunnel cannot pass through.
• Wrong film tension. Loose film leaves bubbles and poor shrink.
• Skipping temperature checks. A cold oven produces loose film.
• Ignoring conveyor alignment. Misaligned conveyors damage the bundle.

Where this line is used

Long-shape bag packing and shrinking is used for:

• Timber and board mills wrapping planks and boards.
• Profile manufacturers protecting extrusions.
• Furniture plants packing long components.
• Building-material suppliers preparing products for shipment.

What to verify with the manufacturer

1. Bundle envelope — maximum length, width, and height.
2. Film options — supported widths and shrink types.
3. Cycle time — bundles per hour.
4. Controls — temperature and speed settings.
5. Safety — guards, emergency stop, and certifications.
6. Support — spare parts, training, and response time.

Operating notes

• Center the bundle. A centered bundle wraps and shrinks evenly.
• Check the film roll. Reload before it runs out.
• Monitor the oven temperature. Adjust for film thickness.
• Test the emergency stop. Confirm it works before each shift.

Maintenance checklist

• Inspect the sealing unit weekly.
• Check the heating elements and motors.
• Clean the conveyor and working area.
• Test the emergency stop before each shift.
• Replace worn film rollers as needed.

Key specification questions

• Bundle size — maximum length, width, and height.
• Film width — supported widths and shrink types.
• Oven length — tunnel capacity per bundle.
• Cycle time — bundles per hour.
• Controls — temperature and speed settings.
• Safety — guards, emergency stop, and certifications.

Why choose this line

Manual wrapping of long products is slow and inconsistent. This line wraps, seals, and shrinks in one sequence. The tunnel produces a tight package that manual work cannot match. For timber and profile producers, that means fewer damaged bundles.

Step-by-step process

1. Feed the long bundle into the wrapping machine.
2. The machine applies film around the bundle.
3. The film is sealed at the correct position.
4. The wrapped bundle moves onto the green conveyor.
5. The bundle enters the heat shrink tunnel.
6. The oven heats the film until it tightens.
7. The bundle exits the tunnel fully shrunk.
8. The worker removes the finished bundle.

More buyer questions

Can the line handle different bundle widths? Confirm the adjustable envelope with the manufacturer.

Is the oven gas or electric? Ask about the heating type and running cost.

What is the line’s floor space? Ask for the installation footprint, including service access.

Summary of benefits

• Automatic wrap, seal, and shrink.
• Consistent tight packaging per bundle.
• Less manual handling of long products.
• Fewer damaged bundles in transit.

Quick checklist

• Confirm the bundle envelope fits your largest product.
• Ask for cycle time per bundle at your production rate.
• Verify film and shrink settings.
• Request drawings, manuals, and compliance certificates.
• Confirm conveyor integration and floor space.

Related reading

• Long Shape Package Bag Packing and Shrinking Machine
• Automatic Pipe Bagging and Shrinking Machine
• Plastic Pipe and Tube Packing: Operation and Applications
• Automatic Profile Wrapping Machine with Long Conveyor & Buffer System

Next step

Contact the FHOPE sales team for a site assessment and a long-shape packing line sized to your products. Use the contact page to start the conversation.

Last updated: 2026-08-21.