Narrow steel slit coils present severe handling vulnerabilities during downstream finishing and strapping. Unlike wide master coils that benefit from an intrinsically wide structural base, slit coils with narrow width-to-diameter aspect ratios are prone to […]
Executive Summary In automated slit coil packaging, coordinating kinematics across the 90° upender, orbital eye-through wrapper, and stacking gantry defines line throughput and surface protection. Setting the film overlap ratio establishes the required wrapping ring
Executive summary This 68 s clip follows bright stainless slit coils through one of our packing lines: a turnstile, a 90° tilter, an eye-through film wrapper, a label unit and a gantry stacker. Most output
Executive summary This slit coil packing line takes a full slitting cut: an upender tips the whole pack of slit coils from eye-horizontal to flat, then the coils travel on roller conveyors through strapping and
Executive summary Slit coils pass a top-face head station, a gantry stacker builds them onto a pallet, and a second line shows an overhead-arm station run from its own HMI. We judge a line like
Steel Coil Strapping, Labelling and Stacking Line: Four Performance KPIs We Track Read More »
Executive summary A steel coil packaging line takes coils from the slitter through strapping, labeling, eye-through wrapping and stacking to a pallet ready for dispatch. Whether the line pays back is judged on five metrics:
Executive summary Bright metal coils mark easily, so one layer of film is often not enough for long transport. Our line turns each coil flat, wraps it in stretch film in two passes and stacks
Two-Stage Coil Stretch Wrapping and Stacking Line Read More »
Executive summary This clip, about 65 s long, follows coils through one of our blue-and-yellow packing lines: narrow film-wrapped coils at an overhead station, a coil wrapped through its eye by a rotating ring, and
Overview An aged steel coil packing line can be upgraded rather than replaced: automatic strapping is retrofitted onto the existing roller conveyors to lift manual strap fitting out of the cycle and raise output without
Old Steel Coil Packing Line Upgrade: Retrofit Automatic Strapping Read More »
Executive summary This automated packaging line is engineered for slitted narrow steel strip coils. A heavy-duty 90° upender receives each coil and rotates it from vertical eye-to-wall orientation to a flat eye-to-sky position. A motorized
Executive Summary A tilting feed rack enables bulk staged loading of multiple steel coils directly into the packaging line, eliminating the crane lift bottleneck required for individual coils. Coils roll by gravity down a controlled-tilt
Steel Coil Line with Tilting Device Read More »