Executive summary This line rewinds heavy building cable into coils, straps each coil, seals it in film and shrinks the film in a tunnel. The finished coils carry a 50 m length label. We size […]
Cable Coil Rewinding, Strapping and Shrink Packing Line: From Reel to Sealed 50 m Coil Read More »
Executive summary 6-side sealed furniture packaging combines two stations in one line. A sealing station encloses the product in bubble film from rolls above and below and heat-seals the open sides. An orbital ring then
6-Side Sealed Furniture Packaging: Bubble Film End-Sealing and 4-Side Orbital Wrapping Read More »
Executive summary An L-frame upender with a shaped fixture turns heavy cast housings from flat to upright. The turn is slow and continuous, in the 60–90 s range of this frame class. For castings the
Upender with Custom Fixture for Heavy Castings: 90° L-Frame Turn of a Cast Housing Read More »
Executive summary A steel coil packaging line is built from modular stations, so each plant picks the stages its coils and dispatch need. The four modules in this line are an orbital wrapping station on
Steel Coil Strapping and Wrapping Line: The Four Modules Read More »
Executive summary FHOPE retrofits aged steel coil packaging lines with an overhead gantry robotic strapping cell — a horizontal coil strapping machine that straps through the coil eye or around the OD on the existing
Overview A master coil wrapper seals large steel coils in film so the bright surface stays protected through storage and transit. The family runs an eye-through (orbital) wrapping cycle inside a fenced safety cell: a
Master Coil Eye-Through Wrapper in a Fenced Cell: Conveyor-Fed Wrapping Cycle Read More »
Executive summary A beam-type chain turner rolls rigid welded frames hanging in slings. Steel sheets and plate stacks do not hang well: the sheets slide, bend or scratch. For them the solution is a floor-mounted
Steel Sheet Upender for 180 Degree Safety Turning: Chain Turner or C-Type Inverter Read More »
Executive summary A crane-hung chain turner rolls a long welded steel frame in mid-air. For repeated 180° turns, the equivalent is a floor-mounted flipper: our FPMF range covers 2–40 t, turning in 20–35 s. The
Big Frame Flipper for 180 Degree Turning: Crane Chain Turner or Floor-Mounted Flipper Read More »
Executive summary A steel wire coil packing line runs four stages: roller conveyor infeed, through-the-eye orbital wrapping, outfeed, and 90° upending onto an edge rack. The FPW series covers coils from 40 kg up to
Steel Wire Coil Wrapping, Upending and Stacking Line: Rewinding Run Read More »
Executive summary A factory test run of an automatic inline pallet wrapper verifies how the automated packaging cell behaves under dynamic line conditions before shipment. Integrated directly into powered roller conveyor networks, the system receives
Automatic Inline Pallet Wrapper: Factory Test Run, Reference Values and FAT Checklist Read More »
Executive summary An installed line running our equipment pairs a tall coil upender station with an eye-through ring that wraps a flat steel coil on a roller conveyor. The safety case for a line like
Steel Coil Upender and Eye-Through Wrapping Line: Where the Safety Gains Come From Read More »
Executive summary Turning slit coils by hand or by crane is slow and puts people next to heavy, sharp-edged loads. Our line in this video turns the coil upright in a clamping upender, feeds it
Stop Turning Coils by Hand: Automatic Coil Turnover, Feeding and Wrapping Line Read More »