This Hydraulic coil upender machine is a custom designed flat tilter with a capacity of upending 40T mold. The upend process requires raising one half of the upender 90° and then loading the tool against the raised half. Next rotates both halves simultaneously which rotates or 'upends' the tool 90° to allow for servicing.
1． Name, model, quantity
Equipment name：Hydraulic coil upender
 
Quantity: 1set
 
2．Basic parameters of the machine
The basic parameters are as follows, but not binding to this:
2.1 Specification:
            Max.Loading  10T      Turning Angle: 90^o  x2
            Customized solution for heavy loading is available.
 
Basic characteristics:
1) Ground designing for easy handling.
2) Heavy designed structure.Has a special heavy-duty design structure.
3) Hydraulic driving.
4) Speed of turning is adjustable.The turning speed of the hydraulic coil upender machine. can be adjusted.
5) The machine can be soft-started and stopped.
6) The upender machine has electromechanical stops, so there is no need to worry about safety issues during operation.
7) There is a separate control panel and can be operated remotely.
8) The hydraulic coil upender machine is very automatic and can automatically stop operating after being set.
9) The machine can move smoothly and accurately without vibration.
10) Two way back pressure technical
Technical parameter:

No.	Item	Figure
2	Turning degree	90° x2
3	Max. Loading	10T
4	Max Loading objects	Per requirement