Sumário executivo
Aluminum profiles are long and easily marked, and a protective film or paper wrap keeps the surface clean through handling. This fully automatic wrapping and packing machine takes long aluminum profiles on a conveyor, runs them through a ring-style wrapping unit, and applies film or paper from rolls that feed around the profile in a spiral. The wrapped profile is then sealed and passed out of the unit. Film or paper choice and wrap settings are confirmed per project.
Conteúdo
- Why profiles need film or paper
- O que a máquina faz
- Film and paper from rolls
- Seal and pass out
- O que as imagens mostram
- Configuração típica
- Lista de verificação de seleção
- Operação e segurança
- Perguntas frequentes sobre engenharia
- Próxima etapa
- Leitura relacionada
- Fontes e normas
Why profiles need film or paper
A long aluminum profile has a bright surface that marks easily and holds fingerprints and dust. A film or paper wrap keeps the profile clean and stops adjacent profiles rubbing together in a bundle.
The choice between film and paper depends on how the profile moves next, so a machine that can feed either gives the line flexibility. Profile length and wrap material are confirmed per project.
O que a máquina faz
The machine is a fully automatic film and paper wrapping packing machine for aluminum profile. Long profiles travel on a conveyor into a ring-style wrapping unit with a rotating press-roll assembly. Film or paper feeds from rolls at the side and wraps around the profile as it travels through the ring.
The whole run is automatic: profiles enter, are wrapped, sealed, and released to the outfeed section. Feed speed and wrap spacing are confirmed per project.
Film and paper from rolls
The footage shows material unrolling at high speed from the side rolls and moving onto the profile inside the ring. The rotating roll assembly guides the material around the profile, so the wrap follows the profile as it passes through.
Because the material feeds from a roll, the wrap can run continuously along the length. Roll width and material grade are confirmed per project.
Seal and pass out
Once the profile is covered, the film or paper edge can be heat-sealed or cut so the wrap stays closed at the end. The profile then passes out of the ring onto the outfeed conveyor, and the unit resets for the next profile.
Sealing keeps the cover tight at both ends of a long profile. Seal and cut settings are confirmed per project.
O que as imagens mostram
Our footage shows aluminum profiles moving through a ring-style wrapping unit with film or paper feeding from rolls, wrapping, and passing out sealed. It is a general demonstration, so your profile size, wrap material and line layout are confirmed with us per project.
Configuração típica
Os valores apresentados abaixo listam os limites funcionais do projeto, em vez de valores numéricos, e são confirmados por projeto.
| Parâmetro | Faixa típica, confirmada por projeto. |
|---|---|
| Ver | long aluminum profile |
| Avanço | esteira reta |
| Embrulhe | ring-style rotating unit |
| Material | film or paper rolls |
| Acabamento | seal or cut at end |
| alimentação eléctrica | 380 V trifásico 50 Hz ou 220 V monofásico para máquinas leves, selecionado conforme o projeto. |
Lista de verificação de seleção
| Questão | Confirme por projeto |
|---|---|
| Faixa de carga | profile length, section, weight |
| Material | film or paper grade |
| Embrulhe | feed speed, spacing |
| Selar | method, position |
| Line | layout de entrada e saída |
| alimentação eléctrica | tensão, fase e frequência no local |
Operação e segurança
Start the line from the control and the profiles wrap and pass through under power. Keep clear of the ring assembly, the roll feed and the conveyor while the machine runs, with safety guarding around the working area.
Routine checks cover the conveyor, the ring drive, the roll feed and the sealer, per the machine manual. Confirm the material settings against the profile before each run.
Perguntas frequentes sobre engenharia
Q: What does this machine do? A: It wraps and packs long aluminum profiles with film or paper from rolls.
Q: Why film or paper? A: The choice protects the profile surface and can change with how the profile moves next.
Q: How is the wrap applied? A: A rotating ring assembly guides the material around the profile as it passes through.
Q: Is it automatic? A: Yes, profiles enter, wrap, seal and pass out without manual steps.
Q: What suits this machine? A: Long aluminum profiles and similar extruded sections.
Próxima etapa
- Email us at info@fhopepack.com with your profile length and section.
- We send a film and paper wrapping proposal and a layout drawing within 48 hours.
- We arrange a site survey to confirm material and line layout.
Leitura relacionada
- Film and paper wrapping machine for aluminum profile
- Máquina de embalagem estirável horizontal
- Orbital stretch wrapper with bopp tape
- Linhas de produtos de máquinas de embalagem FHOPE
Fontes e normas
- ISO 12100:2010 Segurança de máquinas, princípios gerais para projeto e avaliação de riscos
- EN 415-10:2014 Segurança de máquinas de embalagem, requisitos gerais
- EN ISO 13849-1:2023 Segurança de máquinas, partes de sistemas de controle relacionadas à segurança
FHOPE fully automatic film and paper wrapping packing machine for aluminum profile demonstration video. Reviewed as a general demonstration; profile size, wrap material and line layout confirmed per project.
Última revisão: 11/10/2026
