Overzicht
To choose a packing material combination for steel wire packing, start from how the coil is wound and how far it must travel. For short, clean trips stretch film alone protects the coil surface; for long storage or sea transport a VCI rust-protection paper is the usual answer; and strapping is planned at 1 to 3 straps per coil. Every choice is confirmed per project. This guide lays out the material options, the selection logic, and the data to send, and is written for wire processing and coil mill engineers.
The video below shows the steel wire coiling machine in the family — long wire is wound into compact coils that are then packed with the material combination you choose:
Why Material Choice Starts at the Coil
Het verpakkingsmateriaal moet overeenkomen met de manier waarop de staaldraad de machine verlaat. Een strak opgerolde spoel behoudt zijn vorm en heeft slechts een dunne beschermlaag nodig, terwijl een losse of zware spoel extra banden en een stevigere bescherming vereist.
| Spoelconditie | What the packing must cover |
|---|---|
| Tightly wound, stable coil | A surface film keeps the outside clean; light strapping holds the ring |
| Los opwinden | Extra strapping keeps the layers together |
| Heavy or large coil | A stronger cover, with strap count raised where stability needs it |
| Long storage or sea transit | A rust-protection grade, not film alone |
Folie en banden over de spoel houden de draden bij elkaar en het oppervlak schoon, van de machine tot het afleverpunt. Het aantal verpakkingsmaterialen en banden wordt per project vastgesteld.
Selecting the Material Combination
| Trip and storage | Material combination, confirmed per project |
|---|---|
| Short, clean trip, indoor | Stretch film; 1 to 3 straps per coil |
| Longer handling and stacking | Film with strap reinforcement; strap count from coil width, diameter and stability |
| Lange opslag | VCI rust-protection paper; 1 to 3 straps per coil |
| Zee transport | VCI rust-protection paper in a full cover; strap plan confirmed to the route |
| Coated or finished wire | Film or paper grade chosen so the surface is not marked |
VCI (volatile corrosion inhibitor) paper protects the wire surface during long storage and sea transit, while stretch film suits short, clean trips. Film and paper grades are confirmed per project.
Selectiechecklist
| Vraag | Bevestig per project |
|---|---|
| Draadbereik | Wire diameter and coil outer and inner size |
| Type spoel | Round coil or flat ribbon, and ring form |
| Film | Stretch film for short trips, VCI rust paper for long storage |
| Riemen | 1 tot 3 per spoel, gekozen op basis van spoelbreedte, diameter en stabiliteit. |
| Control and line | Panel layout, speed setting and emergency stop |
| Elektrische voeding | Spanning, fase en frequentie op locatie |
Wat de beelden laten zien
Our footage shows the automatic steel wire coiling machine that winds long wire into compact coils: the wire is drawn from a pay-off reel through guide rollers and tension wheels, wound onto a take-up spool, and a machine arm moves the finished ring clear. It is a general demonstration of the coiling step — it does not show a material-selection process. Your wire size, coil type and packing material combination are confirmed with us per project.
Matching Material to the Coil
| spoelkarakteristiek | Material approach (confirmed per project) |
|---|---|
| Light/medium, tidy winding, short transit | Stretch film, single layer or two passes |
| Long storage or sea transit | VCI rust-protection paper or film |
| Loose or heavy coil, high spring-back | Extra strapping (PP for light-medium, PET or steel band for heavy/high-tension coils) plus film |
| Edge damage risk | Edge protectors or buffered guides added to the wrap |
FAQ
Q: What is the simplest packing choice for steel wire?
A: For short, clean trips stretch film alone protects the coil surface; state the trip and storage route so the film grade is confirmed.
Q: When do I need VCI paper?
A: VCI rust-protection paper is the usual choice for long storage or sea transport, where rust protection matters.
Q: How many straps does a coil need?
A: Strapping is planned at 1 to 3 straps per coil, chosen from coil width, diameter and stability.
Q: What does the coiling machine do?
A: It winds long steel wire into compact coils and transfers the finished ring for the next step.
V: Welke veiligheidsnormen zijn van toepassing?
A: Ask the supplier for the machine's safety documentation and CE certification status as part of the quotation; the guide itself is about material selection, so certification is confirmed on the project, not assumed.
Volgende stap
Send your wire diameter and coil type, the transit route (short clean trip, long storage or sea transport), and the target strap count, so the film or paper grade and strap plan are confirmed for your coils.
Verwante bronnen
- Automatische staaldraadoproller voor draadwikkeling en omsnoering. – Winding and strapping in the same coiler family.
- Automatische machine voor het oprollen en vastbinden van draadspoelen – Related handling of wound wire coils.
