개요
A rotary arm pallet wrapping machine wraps a pallet load with stretch film while the load stays on the conveyor. An arm above the load turns around it while the film carriage on the arm moves up from the base, covering the load nearly to the top. The wrapped pallet moves out on the same conveyor, ready for dispatch. Load height, weight and film settings are confirmed per project.
차례
- Why rotary arm pallet wrapping
- 기계가 하는 일
- How it works: rotary arm, film carriage and conveyor infeed
- 주기 및 제어
- 영상에 나타난 내용
- 일반적인 구성
- 선택 체크리스트
- 운영 및 안전
- 엔지니어링 FAQ
- 다음 단계
- 관련 독서
- 출처 및 표준
Why rotary arm pallet wrapping
A pallet load of stacked boxes needs a film wrap to stay square during handling, storage and transport. A rotary arm wrapper does the wrap while the load stays on the conveyor, which suits lines where the pallet cannot turn on a turntable.
The arm turns around the load, so the film is laid evenly from the base upward. Load height and weight are confirmed per project.
기계가 하는 일
The machine is a rotary arm pallet wrapper with a roller conveyor running through the wrap zone. A pallet load moves in on the conveyor and stops, and a rotary arm above the load turns and rises to apply film.
The wrapped pallet then continues on the same conveyor for the next stage. Load size, weight and film settings are confirmed per project.
How it works: rotary arm, film carriage and conveyor infeed
A roller conveyor carries the pallet into the wrap zone, where the load stops for the cycle. A rotary arm above the load carries the film carriage; the arm turns around the load while the carriage moves up from the base to apply the film.
A control cabinet on the machine side carries the panel for the cycle, and fencing separates the wrap zone. The arm travel and conveyor height are set to the load and confirmed per project.
주기 및 제어
The pallet enters the wrap zone and the machine runs the wrapping cycle automatically, with the arm turning from the base of the load to the top. At the end of the cycle the film is parted and the arm returns for the next load.
The wrapped pallet leaves on the same conveyor once the cycle finishes. Number of layers and the wrap tension are set on the panel and confirmed per project.
영상에 나타난 내용
Our footage shows a stack of dark boxes on a pallet entering the wrap zone on a roller conveyor. A yellow rotary arm then turns around the load while film from the carriage on the arm is applied from the base upward.
At the end of the cycle the arm lifts and the film is parted, and the wrapped pallet exits on the same conveyor. It is a general demonstration, so your load height, weight and film settings are confirmed with us per project.
일반적인 구성
아래 표는 수치 값이 아닌 기능적 설계 경계를 나열한 것이며, 프로젝트별로 확정된 내용입니다.
| 매개 변수 | 일반적인 범위이며, 프로젝트별로 확정됩니다. |
|---|---|
| 하중 | pallet of stacked products on the roller conveyor, confirmed per project |
| 방법 | rotary arm turns and rises, film applied from the base upward, confirmed per project |
| 토큰 전송 | conveyor in, wrapped pallet out on the same conveyor, confirmed per project |
| Film | 암에 장착되는 캐리지의 종류와 너비는 적재물에 맞춰 선택되며, 프로젝트별로 확정됩니다. |
| Control: | control cabinet with panel on the machine side, confirmed per project |
| 가딩 | fencing around the wrap zone, confirmed per project |
| 산 | floor mount, in line with the conveyor, confirmed per project |
| 전기 공급 | 프로젝트에 따라 380V 3상 50Hz 또는 220V 단상 전원을 선택할 수 있습니다. |
선택 체크리스트
| 문제 | 프로젝트별로 확인하세요. |
|---|---|
| 하중 범위 | 팔레트 크기, 적재 높이, 무게 |
| Film | 유형, 너비, 사전 스트레칭 |
| 포장을 | 레이어 수, 장력, 탑 커버리지 및 베이스 커버리지 |
| Control: | panel layout, conveyor interface |
| 사이트 | 바닥 면적, 컨베이어 위치 |
| 전기 공급 | 현장에서 전압, 위상 및 주파수 측정 |
운영 및 안전
Confirm the pallet is centred on the conveyor and clear of the wrap zone before the cycle starts. Run the wrap and stay outside the fencing while the arm moves.
Routine checks cover the conveyor, the film path and the rotary arm, per the machine manual.
엔지니어링 FAQ
Q: What does this machine do? A: It wraps a pallet load with film by turning a rotary arm around the load while it stays on the conveyor.
Q: Why use a rotary arm instead of a turntable? A: The arm turns around the load, so the pallet is wrapped by staying on the conveyor, which suits lines without a turntable.
Q: Does the load stop for the wrap? A: Yes, the pallet stops in the wrap zone for the cycle, and it moves out on the same conveyor when the cycle finishes.
Q: Can it handle different load heights? A: The arm rises with the wrap, and the load height, weight and film settings are confirmed per project when you tell us your pallet details.
Q: What does it suit? A: Pallet loads of stacked boxes and cartons that need a film wrap before storage or dispatch, where the film choice requires confirmation per project.
다음 단계
- 팔레트 크기와 적재 정보를 info@fhopepack.com으로 이메일로 보내주세요.
- 팔레트 포장 견적서를 48시간 이내에 보내드립니다.
- We confirm the conveyor height, arm travel and film settings for your line.
관련 독서
출처 및 표준
- ISO 12100:2010 기계 안전, 설계 및 위험 평가에 대한 일반 원칙
- EN 415-10:2014 포장기계의 안전, 일반 요구사항
- EN ISO 13849-1:2023 기계의 안전, 제어 시스템의 안전 관련 부품
FHOPE rotary arm pallet wrapping machine demonstration video. Reviewed as a general demonstration; load size, weight and film settings confirmed per project.
최종 검토일: 2026년 10월 12일
