Executive summary
An automatic roll stretch wrapping machine handles a large silver material roll on a conveyor line: the roll rotates slowly while a mechanical arm with a laser line scans it, driven from a beige frame with blue hydraulic components. This page covers what the demo clip supports, the sizing data to send, and what this clip does not demonstrate.
Inhaltsverzeichnis
- Was diese Maschine tut
- Rahmen und Antrieb
- Roll handling cycle
- Was das Demomaterial unterstützt
- Dimensionierung und Konfiguration
- Bedienung und Sicherheit
- Häufig gestellte Fragen zur Technik
- Nächster Schritt: Checkliste für Angebotsanfragen
- Verwandte lesen
- Quellen und Standards
Was diese Maschine tut
A large cylindrical roll of shiny silver material needs stable handling and wrapping before it travels or sits in storage. This machine class carries the roll horizontally and rotates it through a processing line, so the wrap is laid on while the roll turns.
Use this page to decide whether an automatic roll stretch wrapper fits your line, and to see which data FHOPE asks for to size one.
Rahmen und Antrieb
The machine has a beige frame with blue hydraulic components, a conveyor belt system, and a vertical traffic-light style signal tower with red, yellow and green lights. A control panel carries the operating controls, and blue motors drive the moving parts.
Labels read on the equipment include FASCO and Kato on the conveyor sections. Roll weight and drive rating are set in the sizing step.
Roll handling cycle
The cycle starts with the roll on the line: it rotates slowly while being fed through the processing line. A mechanical arm with a laser line scans the roll surface, and the wrap is applied as the roll turns.
The roll stays on the horizontal axis through the cycle. A red laser line appears on the roll surface during processing; turn rate and wrap time are confirmed with your roll in the sizing step.
Was das Demomaterial unterstützt
The clip shows a large cylindrical roll of shiny silver material, likely metal sheet or foil, mounted horizontally on the machine. The roll rotates slowly through the line while a mechanical arm and laser line scan it.
It is a general demonstration. It does not show rated roll weight, max roll diameter and width, cycle time, or film grade, and it does not demonstrate a separate strapping or top-cover stage. Those points are confirmed in the enquiry, not assumed.
Dimensionierung und Konfiguration
This machine is sized from your roll range and site, not from a fixed rating plate. Confirm the following with FHOPE in the enquiry:
| Daten zur Bestätigung | Was es bestimmt |
|---|---|
| Roll weight, diameter and width range (kg, mm) | Frame, drive and conveyor sizing |
| Material type and wrap requirement | Film stock and wrapping force settings |
| Feed rate and output per shift | Leitungsdimensionierung und Zykluszeit |
| How the roll is loaded and removed | Verladeausrüstung und Layout |
| Elektrische Versorgung (Spannung, Phase, Frequenz) | Antriebs- und Steuerungsanlage. Standardmäßig 380 V Drehstrom, 50 Hz; optional 220 V Wechselstrom, vor Ort geprüft. |
Jede einzelne Reihe wird vor Baubeginn an die Gegebenheiten vor Ort angepasst.
Bedienung und Sicherheit
Place the roll on the line, start the cycle, and let the machine rotate and wrap it automatically. Take the finished roll from the conveyor when the wrap is complete.
Keep clear of the rotating roll and the scanning arm while the machine runs, and check the drive and film feed per the machine manual. Stop the machine and isolate the power supply before clearing a jam or reaching near the roll, and apply lock-out per the site procedure before any service work.
Häufig gestellte Fragen zur Technik
Q: What does this roll stretch wrapping machine do? A: It carries a large material roll on a conveyor line and wraps it while the roll rotates slowly through the cycle.
Q: How is the roll surface checked during the cycle? A: A mechanical arm with a red laser line scans the roll surface while the wrap is applied.
Q: What frame and drive does it use? A: A beige frame with blue hydraulic components and blue motors, with a traffic-light style signal tower on the machine.
Q: Can a separate strapping or top-cover stage be added? A: Yes, both are options to confirm with the builder; the demonstrated cycle covers the film wrap only.
F: Welche Stromversorgung wird benötigt? A: Das Haus ist üblicherweise mit 380 V Drehstrom, 50 Hz ausgestattet; kleinere Maschinen können mit 220 V Wechselstrom betrieben werden. Bitte bestätigen Sie die Stromversorgung vor Ort in Ihrer Anfrage.
Nächster Schritt: Checkliste für Angebotsanfragen
- Email info@fhopepack.com with your roll weight, diameter and width range.
- State whether strapping or a separate top-cover stage is required.
- Submit your layout drawing of the roll infeed and outfeed area.
- Sie erhalten innerhalb von 48 Stunden ein Angebot mit Folienqualität, Folienabdeckung und Zykluszeit. Buchen Sie eine Standortbesichtigung, wenn Sie die Anordnung des Förderbandes vor dem Bau überprüfen lassen möchten.
Verwandte lesen
- Palettenwickelmaschine mit automatischem Folienschnitt: Zyklus, Folienverbrauch und Einstellungen
- Palettenwickelmaschinen für die Online-Verpackung mit Deckfolie
- FHOPE Verpackungsmaschinen-Produktlinien
Quellen und Standards
- ISO 12100:2010 Sicherheit von Maschinen, allgemeine Grundsätze für die Konstruktion und Risikobewertung
- EN 415-6:2016 Safety of packaging machines — Pallet wrapping machines
Die anzuwendenden Normen hängen vom Zielmarkt ab. Für CE-Märkte regelt die EN 415-6 Stretchfolien-Palettenwickelmaschinen, und die ISO 12100 legt die Risikobewertungsmethode fest.
Demonstration footage (video i5fO2Br6Xzs) reviewed as a general machine demo; rated outputs are not shown in the clip and are therefore not quoted. Last reviewed: 2026-10-18.
