Übersicht
A coated coil packing machine wraps a coated steel coil — such as color-coated or pre-painted strip — in stretch film or paper on a dedicated wrapping station, so the finished surface stays protected from handling marks, dust and moisture from the line to the customer. The video below shows the coil wrapping station in the family: the coil sits on a roller platform while a carriage orbits it to apply the wrap. This guide covers what the machine does, what to specify, and what to verify before acceptance, for coil mill engineers and coil-line buyers.
Why Pack Coated Coils Differently
Coated strip has a finished paint film that must not be scratched:
| Risk to a coated coil | How the packing machine answers |
|---|---|
| Surface contact and scuffs | Film/paper applied in a controlled pass before handling |
| Kantenschäden | Edge protection can be added in the wrapping cycle |
| Dust and moisture in transit | Full wrap and, where needed, a cover |
| Operator handling marks | Automatic station replaces hand wrapping |
How the Wrapping Station Works
| Element | Was sie tut, |
|---|---|
| Coil support | A roller platform holds and rotates the coil so every side is reachable. |
| Film/paper carriage | A carriage orbits the coil, applying the protective wrap in consistent layers. |
| Film clamp and cut | The wrap is clamped, cut and sealed at the end of the cycle. |
| SPS-Programm | Layer counts and overlap are stored per coil spec. |
The machine family is supplied as manual, semi-automatic and in-line stations; the right level is chosen from coil size, volume and line speed, and confirmed per project.
Was ist anzugeben?
| Eingang | Warum es wichtig ist |
|---|---|
| Coil OD/ID, width, weight | Sets platform, carriage and wrapping ring geometry. |
| Film or paper and gauge | Sets the dispenser and seal settings. |
| Lagen umwickeln und überlappen | Sets the program and cycle time. |
| Zyklusdurchsatz | Sets automation level (manual to in-line). |
| Edge/eye protection | Sets whether added protectors are integrated. |
| Leitungsschnittstelle | Sets conveyor feed and PLC hand-off. |
Werksprüfung und -abnahme
- Full-cycle evidence. A test log of complete wrap cycles (rotate, apply, clamp, cut, seal).
- Verlängerter Lauf. The vendor’s stated practice on this family includes near-continuous pre-delivery testing (up to about 24 hours where stated).
- Kontrolle und Sicherheit. Smooth, responsive control; emergency stop verified; guarding around the moving carriage.
- Surface check. Evidence that the wrap pass did not mark the coated surface during testing.
- Inbetriebnahme. Written installation, commissioning and on-site service scope.
- Spulenverpackung: Funktionsweise und Anwendungen – The full coil packing sequence.
- Spulenentbänderungsmaschine – Coil handling at the start of a line.
- Spulenwender- und industrielle Wendelösungen – Coil handling equipment in the same family.
On arrival repeat: empty cycle, loaded cycle, emergency stop, surface check.
FAQ
Q: Can it wrap with paper instead of film?
A: Yes, depending on the dispenser. State the material and gauge when specifying so the carriage and seal unit match it.
Q: Does it handle the coil rotation itself?
A: On powered-roller stations the coil rotates under the carriage; manual stations rotate by operator. This is a project choice.
Q: What safety standards apply?
A: The machine family is designed with EN 415-10 as the packaging-machinery safety reference and an ISO 12100 risk assessment for the moving carriage.
Nächster Schritt
Send coil OD/ID/width/weight, film or paper type, wrap layers, throughput and line interface so the station is sized on the approval drawing.
