صندوق هيدروليكي وقلاب حاوية

> **ملخص تنفيذي**
> A tote tipper lifts a box or tote and turns it over, so the contents pour out at height without anyone lifting the load by hand.
> Ours lifts the box on a chain drive in a grey frame and tips it, powered by a compact hydraulic unit at its side.
> Output follows from the **lift, tip and return times**, set per project to your boxes and discharge height.

جدول المحتويات

ما يظهر الفيديو

يبدأ المقطع بلقطة مقرّبة لسلاسل الرفع والتروس، مع وجود الأسطوانة الهيدروليكية بينهما. ويُشير التعليق إلى أنها آلة رفع وقلب. ثم تعود الكاميرا لتُظهر الوحدة بأكملها على أرضية مصنع خضراء.

يحمل الإطار الرمادي حامل الصندوق في مقدمته، وتقف بجانبه وحدة طاقة هيدروليكية زرقاء. في اللقطات التالية، يُرفع الحامل ويُدار، وهي الحركة التي يقوم بها الصندوق الممتلئ لتفريغ محتوياته.

كيف يعمل جهاز قلاب الحاويات

| الخطوة | ماذا يحدث |
|---|---|
| Load | The box or tote is set in the cradle at floor level |
| Lift | The cylinder drives the chains, raising the cradle up the frame |
| Tip | At the top the cradle turns over and the box empties |
| Return | The cradle turns back and lowers to the floor |

يثبت الحامل الصندوق أثناء انقلابه، فيبقى الصندوق ثابتًا في مكانه بينما تتدفق محتوياته. تعمل سلسلة الدفع على مضاعفة شوط الأسطوانة، مما يجعل الصندوق يرتفع لمسافة أبعد بكثير من حركة الأسطوانة. تحافظ الوحدة الهيدروليكية على ثبات الحمولة في أي نقطة من عملية الرفع.

تقدير الدورة

دورة توضيحية لصندوق واحد:

| Step | Time (illustrative) |
|---|---|
| Lift | 10 s |
| Tip | 5 s |
| Hold to empty | 10 s |
| Return and lower | 15 s |
| Total per box | 40 s |
| Boxes per hour, 3,600 ÷ 40 | about 90 |

تحتاج المحتويات اللزجة أو المضغوطة إلى فترة تثبيت أطول. أضف إلى ذلك الوقت اللازم لوضع كل صندوق في الحامل وإزالته.

مطابقة الشاحنة القلابة مع الصندوق

| Check | Why it matters |
|---|---|
| Box size and shape | The cradle is built to hold it |
| Full box weight | Sets the cylinder and frame |
| Discharge height | Sets how far the box must rise |
| Where it pours | A hopper, conveyor or machine inlet below the tip point |

قم بقياس وزن الصندوق الممتلئ، وليس الصندوق الفارغ، وأخبرنا بما يصب فيه الصندوق.

الضوابط والسلامة

تتحرك قاعدة المصعد والسلاسل والصندوق أثناء دورة التشغيل. لذا، يُرجى إبقاء الأشخاص بعيدًا عن مسار المصعد والمنطقة الواقعة أسفل نقطة التوقف أثناء تشغيله.

تختلف المعايير المطبقة باختلاف السوق المستهدف. ففي أسواق الاتحاد الأوروبي، يحدد معيار ISO 12100 طريقة تقييم المخاطر، بينما يحدد معيار EN 415-10 المتطلبات العامة لآلات التعبئة والتغليف.

قائمة التحقق من اختيار سائق شاحنة نقل البضائع

- [ ] Box or tote size and full weight.
- [ ] Discharge height and what it pours into.
- [ ] Boxes per hour.
- [ ] Contents: loose, sticky or packed.
- [ ] Floor space.
- [ ] Power supply on site.

أسئلة وأجوبة هندسية

Q: What does a tote tipper do?
A: It lifts a box or tote and turns it over, so the contents pour out at height.

Q: Why a chain lift?
A: The chains multiply the cylinder stroke, so the box rises further than the cylinder moves.

Q: How many boxes per hour?
A: 3,600 divided by the cycle time. Our 40 s machine cycle gives about 90, before the time to bring each box in and take it away.

Q: How high can it lift?
A: That is set per project from the height your hopper or machine inlet needs.

Q: What powers it?
A: A hydraulic power unit beside the frame.

الخطوة التالية

نخطط لعملية قلاب الحاويات الخاصة بك في ثلاث خطوات:

1. **Submit your layout drawing** with box size and weight to **info@fhopepack.com**.
2. **Receive a proposal within 48 hours**, with the discharge height and cycle.
3. **Book a site survey** to check the floor space and power.

- [Video: box dumper operation and test](https://www.fhopepack.com/videos/box-dumper/)
- [Video: automatic crate and tote dumper](https://www.fhopepack.com/videos/automatic-crate-and-tote-dumper/)
- [محول المنصات](https://www.fhopepack.com/pallet-inverter/)

مصادر

- محتوى الآلة: فريق هندسة FHOPE، 10-04-2026
- Cycle example: our worked example, illustrative values
- Machine in action: [our video on YouTube](https://www.youtube.com/watch?v=zSTejfPZgKs)
- نطاق المعايير: [ISO 12100:2010](https://www.iso.org/standard/51528.html)، [EN 415-10:2014](https://www.nen.nl/en/nen-en-415-10-2014-en-191845)

آخر مراجعة: 2026-10-04