Sammanfattning: This page is for anyone packing steel coils with the eye vertical and deciding how to automate the film wrap. It explains what an eye vertical coil stretch wrapper and packing machine does, how a rotating platform and an arm from above apply white film around a coil, and what to verify with a supplier before you commit. The video below shows one coil being wrapped, and the photos on this page are product-library reference images, not stills from the clip.
På den här sidan: Vad den här sidan hjälper dig att bestämma · What an eye vertical coil wrapper does · How the coil is wrapped · Vad du bör kontrollera innan du köper · Vad videon visar · Checklista för köparens verifiering · FAQ · Relaterad läsning · Nästa steg
Vad den här sidan hjälper dig att bestämma
Steel coils with the eye vertical need a film cover so the coiled strip stays protected and neat. An eye vertical coil stretch wrapper and packing machine applies white film around the coil as it rotates on a platform, with an arm feeding film from above. The video below shows one coil being wrapped.
This page turns that machine into questions you can ask a supplier: what coil sizes it accepts, how the wrap is applied, and what controls come with it. The checklist at the bottom gives you a single request you can send as it stands.
What an eye vertical coil wrapper does
An eye vertical coil stretch wrapper and packing machine applies white plastic film around a steel coil held with its eye vertical. The coil sits on a rotating platform at the center of the machine, and a curved arm from above feeds film onto the outer surface while the platform turns.
In the video the machine has a green painted metal structure. A rotating platform carries the coil, and a curved arm descends from above to feed film. A roll holder at the top of the arm holds the white film roll, and a yellow metal guard rail surrounds the working area.
How the coil is wrapped
The rotating platform and the overhead arm work together.
- Ladda. The coil is placed on the rotating platform with its eye vertical.
- Rotera. The platform turns the coil at a steady speed.
- Mata in filmen. The curved arm from above guides the white film from the roll at its top onto the coil.
- Slå in. The film covers the coil surface in multiple layers as the platform turns, and a worker adjusts the film edge to keep it flat.
The wrap runs with the platform turning and the arm feeding film, and a worker supports the film by hand during the cycle.
Vad du bör kontrollera innan du köper
Videon visar själva inplastningen, inte specifikationen. Ingenting på skärmen anger rulldiameter, bredd eller viktintervall, cykeltid eller genomströmning, så dessa siffror kommer skriftligen från leverantören. Börja med sex fakta:
- Spolhölje — minsta och största spoldiameter, bredd och vikt.
- genomströmning — spolar per timme.
- Filmuppsättning — filmtyp, bredd, tjocklek och antal lager.
- Riktning — whether the machine accepts eye-vertical coils at your sizes.
- Fjärrkontroll — panel functions and how the arm and platform are set.
- Säkerhetspaket — the yellow guard rail, emergency stop and certifications.
Varje vara påverkar köpbeslutet. Checklistan nedan återger dem som en enda förfrågan som du kan skicka som den är.
Vad videon visar
What the video shows is one steel coil being wrapped by an eye vertical coil wrapper. At the start a worker in a yellow top and white gloves stands by the green machine while white film wraps a large ring-shaped coil on the rotating platform. A curved arm from above feeds the film onto the coil as the platform turns, building multiple layers. The worker adjusts the coil edge and the film by hand as the wrap continues.
The film covers most of the coil surface during the run, and a second worker in the same yellow uniform walks behind the machine and observes. The machine runs steadily until the coil is almost fully wrapped.
What the video does not show is just as important. It does not show coil diameter, width or weight range, cycle time, coils per hour, film type, width or layer counts, model, power or voltage. It does not show how the film end is cut and sealed, and it does not show the wrapped coil being removed or palletised.
Direct observation notes from the sampled frames follow one rule: only what is visible is stated, and nothing is guessed from audio, because the clip has background music and no narration. The machine has a green painted metal structure with a rotating platform at the bottom and a curved arm feeding film from above, with a white film roll at the top of the arm.
A control panel on the machine carries buttons and a green indicator light, and a yellow metal guard rail surrounds the working area. The product is a large ring-shaped metal coil held with its eye vertical on the platform, covered in white plastic film. The photos on this page are product-library reference images from the manufacturer, not stills from the clip.
Checklista för köparens verifiering
| Fråga leverantören om | Varför det avgör köpet |
|---|---|
| Min/max spoldiameter, bredd, vikt | Huruvida plattformen håller dina spolar |
| Spolar per timme | Om den håller jämna steg med din linje |
| Filmtyp, bredd, tjocklek, lager | Filmen är det som skyddar spolen |
| Eye-vertical orientation accepted? | The video shows an eye-vertical coil |
| Arm and platform control settings | An arm feeds film from above |
| Safety: guard rail, E-stop, certs | A yellow guard rail is visible |
Skicka till leverantören: Please confirm for the eye vertical coil stretch wrapper shown in the demonstration video: (1) the minimum and maximum coil diameter, width and weight; (2) coils per hour; (3) film type, width, thickness and number of layers; (4) whether eye-vertical coils at our sizes are accepted; (5) how the arm and platform are set for the wrap; (6) fitted safety devices including the yellow guard rail, emergency stop and certifications.
FAQ
How is the coil oriented while wrapping? The coil sits with its eye vertical on the rotating platform, and an arm from above feeds film onto it.
Does the worker handle the film? The video shows a worker adjusting the coil edge and the film by hand during the wrap, helping it sit flat.
Vilka säkerhetsdetaljer är synliga? A yellow metal guard rail around the working area. Confirm the full safety package with the supplier.
Relaterad läsning
- Stålspoleförpackningsmaskin
- Automatisk Coil Packing Line
- Coil Pack Machine
- Ögon vertikal spolsträcknings- och packningsmaskin
- Ståltrådspolningslindningsmaskin och förpackningsmaskin
- Packningsmaskin för trådspole, stålspole och rörspole
Nästa steg
Skicka leverantören dina spolstorlekar, målutgång och filmkrav och be om de sex verifieringssiffrorna från checklistan ovan.
Then confirm the eye-vertical orientation at your coil sizes, since the video shows that configuration and it decides loading.
Then ask about the film finish and safety package, because the video shows the wrap but not the seal or the full guarding. Use the kontakt sida att starta det utbytet.
Senast granskad: 2026-09-24
Publicerad: 2026-09-24
