Sumário executivo
A stretch hood bag packing machine seals an EPS insulation panel inside a plastic film bag without touching the panel face. The panel is fed onto a conveyor, a film bag is drawn down over it, and the film is closed at the lower edge so the board comes out sealed on the other side. Panel size, film dimensions and line speed are confirmed per project.
Conteúdo
- Why stretch hood bag packing
- O que a máquina faz
- How the bag is formed and drawn from film
- Ciclo e controle
- O que as imagens mostram
- Configuração típica
- Lista de verificação de seleção
- Operação e segurança
- Perguntas frequentes sobre engenharia
- Próxima etapa
- Leitura relacionada
- Fontes e normas
Why stretch hood bag packing
An EPS insulation panel is light and large in area, so a dent or a scuffed face is easy to see and hard to repair. A sealed film bag keeps the board clean and protected while it is stored, stacked or carried to site.
Because the bag is drawn over the whole panel as one piece, the face is not pressed and there are no straps pressing into the soft board. Film grade and bag dimensions are confirmed per project.
O que a máquina faz
The machine is a stretch hood bag packing unit laid out in a line. Panels are placed on the infeed conveyor, and each panel travels into the machine while a transparent film bag is drawn over it from above.
The lower edge of the bag is then closed, and the sealed panel leaves on the outfeed side for collection. Panel length and bag dimensions are confirmed per project.
How the bag is formed and drawn from film
The main structure is a vertical machine frame. A movable upper frame holds a film bag open in a vertical position above the conveyor, and a film roll plus a control cabinet sit on the machine body.
When a panel reaches the bagging position, the upper frame lowers and draws the film over the panel, and the bag is closed at the lower edge. Conveyor length and bag format are confirmed per project.
Ciclo e controle
The cycle runs in clear steps. A panel is fed in on the conveyor while the film bag is held open in the vertical position. The upper frame moves down to draw the bag onto the panel, the film is closed at the lower edge, and the sealed panel is carried out.
The control cabinet carries the push buttons and indicator lamps for the cycle. Cycle timing and the control layout are confirmed per project.
O que as imagens mostram
Our footage shows a transparent film bag held open under the upper frame, and an orange rectangular insulation board being fed in on the conveyor from the infeed side. The upper frame draws the film down over the board, the bag is closed around the lower edge, and the sealed panel is carried out on the outfeed side. It is a general demonstration, so your panel size, film format and line speed are confirmed with us per project.
Configuração típica
Os valores apresentados abaixo listam os limites funcionais do projeto, em vez de valores numéricos, e são confirmados por projeto.
| Parâmetro | Faixa típica, confirmada por projeto. |
|---|---|
| Ver | rectangular EPS insulation panels on the infeed conveyor |
| Processo | film bag drawn over each panel and sealed at the lower edge |
| Transferência | infeed conveyor in, outfeed conveyor out |
| Controlar | Botões de pressão e lâmpadas indicadoras no painel de controle |
| monte | floor mounted, in line with the panel line |
| alimentação eléctrica | 380 V trifásico 50 Hz ou 220 V monofásico para máquinas leves, selecionado conforme o projeto. |
Lista de verificação de seleção
| Questão | Confirme por projeto |
|---|---|
| Painel | comprimento, largura, espessura e peso |
| Filme | type, width, stretch and seal method |
| Bolsa | bag length, open width and film format |
| Ciclo | bagging speed and conveyor pacing |
| Controlar | Disposição do painel e proteção ao redor da linha |
| alimentação eléctrica | tensão, fase e frequência no local |
Operação e segurança
Place each panel on the infeed conveyor, start the cycle, and let the machine draw the bag and close the lower edge. Keep hands clear of the moving upper frame and the bag-closing area while the machine is running.
Routine checks cover the upper frame, the film supply and the bag-closing unit, per the machine manual. Confirm the panel is seated on the conveyor before each cycle.
Perguntas frequentes sobre engenharia
Q: What does this machine do? A: It draws a plastic film bag over each EPS insulation panel and seals it, so the panel leaves the line in a protective bag when the cycle ends.
Q: How is the bag applied? A: The bag is held open by the upper frame, lowered over the panel as it sits on the conveyor, and closed at the lower edge.
Q: Do our people feed each panel by hand? A: The footage shows panels fed from the infeed side by the conveyor line; automatic feeding is arranged when the line speed requires it.
Q: Does the film press on the panel face? A: The bag is drawn on as one piece, so the face of the board is not pressed; if the panel face needs extra clearance, this is handled per project.
Q: What does it suit? A: Long rectangular boards such as EPS insulation panels that need a clean, sealed finish when they are stored or transported.
Próxima etapa
- Email us at info@fhopepack.com with your panel size and thickness.
- We send a stretch hood bag packing proposal within 48 hours.
- We confirm the bag format and electrical supply for your site.
Leitura relacionada
- Embalagem selada de painéis de isolamento EPS por embalagem com capa elástica
- Máquina de embalagem encolhível de placa de porta de madeira
- Equipamentos de embalagem: tecnologia e melhores práticas para portas
- Linhas de produtos de máquinas de embalagem FHOPE
Fontes e normas
- ISO 12100:2010 Segurança de máquinas, princípios gerais para projeto e avaliação de riscos
- EN 415-10:2014 Segurança de máquinas de embalagem, requisitos gerais
- EN ISO 13849-1:2023 Segurança de máquinas, partes de sistemas de controle relacionadas à segurança
FHOPE stretch hood bag packing demonstration video. Reviewed as a general demonstration; panel size, film format and line speed confirmed per project.
Última revisão: 12/10/2026
