Managementsamenvatting: This page is for anyone shipping large flat boards and panels and deciding how to automate the film wrap. It explains what an automatic panel wrapping machine does, how a ring arm applies stretch film in a spiral around a board as it moves on a conveyor, and what to verify with a supplier before you commit. The video below shows one board being wrapped, and the photos on this page are product-library reference images, not stills from the clip.
Op deze pagina: Wat deze pagina u helpt te beslissen · What an automatic panel wrapping machine does · How a board is wrapped · Wat je moet controleren voordat je iets koopt · Wat de video laat zien · Controlelijst voor kopersverificatie · FAQ · Gerelateerd lezen · Volgende stap
Wat deze pagina u helpt te beslissen
Large flat boards and panels are wide, long and easy to scratch, and a full film cover protects the surface in storage and freight. An automatic panel wrapping machine applies stretch film in a spiral around the board as it moves through the machine. The video below shows one board being wrapped.
This page turns that machine into questions you can ask a supplier: what board sizes it accepts, how the wrap is applied, and what controls come with it. The checklist at the bottom gives you a single request you can send as it stands.
What an automatic panel wrapping machine does
An automatic panel wrapping machine applies transparent stretch film around a flat board as it travels on a conveyor. The board moves on a conveyor through the machine, and a ring arm or rotating wrap head goes around the board, applying the film in a spiral until the surface is covered. A roll of film above the machine feeds the material, and rollers keep the film flat against the board.
In the video the machine has a grey or silver metal frame in a linear layout, with a green conveyor running through it. A film roll sits above the machine, and a ring arm rotates around the board in the wrapping zone.
How a board is wrapped
The conveyor and the rotating ring arm work together.
- Eten geven. A board is placed on the conveyor at the feed end, and the conveyor carries it in.
- Gids. Film is drawn from the overhead roll and laid over the top of the board, guided by pressure rollers and side guides.
- Wikkelen. The ring arm rotates around the board and applies stretch film in a spiral as the board advances, covering the surface completely.
- Finish. The film is cut and finished, and the wrapped board moves out of the machine.
The film is applied as a spiral over the board’s full length, so the surface ends up fully covered.
Wat je moet controleren voordat je iets koopt
The video shows the wrapping action, not the specification. Nothing on screen states board size range, line speed, film data or throughput, so those figures come from the supplier in writing. Start with six facts:
- Paneelomhulsel — minimum and maximum board length, width, thickness and weight.
- Doorvoer — boards per hour.
- Filmopstelling — filmtype, breedte, dikte en aantal lagen.
- het laden — how boards are fed and aligned.
- Controls — the control panel, which is not visible.
- Veiligheidspakket — noodstops, bewaking en certificeringen.
Elk punt beïnvloedt de aankoopbeslissing. De onderstaande checklist vat ze samen in één verzoek dat u direct kunt versturen.
Wat de video laat zien
What the video shows is one flat board being wrapped by an automatic panel wrapping machine. At the start a dark solid rectangular board sits at the feed end of the green conveyor, and a worker helps position it.
Film is drawn from an overhead roll and laid over the top of the board, guided by pressure rollers and side guides. The ring arm then rotates around the board and applies stretch film in a spiral as the board advances, pressed tight until the surface is fully covered.
The film is cut and finished, and the wrapped board ends vertical and at rest at the output.
What the video does not show is just as important. It does not show board length, width or thickness range, line speed, boards per hour, film type, width or layer counts, model, power or voltage. It does not show a control panel, emergency stop, guard rail or cutting details, and it does not show the wrapped board being removed or stacked.
Direct observation notes from the sampled frames follow one rule: only what is visible is stated, and nothing is guessed from audio, because the clip has background music and no narration. The machine has a grey or silver metal frame in a linear layout with a green conveyor running through it. A film roll sits above the machine, and a ring arm rotates around the board in the wrapping zone, with pressure rollers and yellow side guides.
No readable label or watermark appears in the frames, and the source is low resolution so small details are not visible. The product is a dark solid rectangular board, flat, longer than it is wide, wrapped in transparent film and ending upright at the output. The photos on this page are product-library reference images from the manufacturer, not stills from the clip.
Controlelijst voor kopersverificatie
| Vraag de leverancier om | Waarom het de aankoopbeslissing bepaalt |
|---|---|
| Min/max board size and weight | Whether the ring holds your boards |
| Boards per hour | Of het gelijke tred houdt met uw lijn |
| Filmtype, breedte, dikte, lagen | The film is what protects the board |
| How boards are fed and aligned | A worker helps feed the board |
| Functies van het bedieningspaneel | No control panel is visible |
| Veiligheid: Noodstop, afscherming, certificaten | Geen van beide is duidelijk te zien in de video. |
Verzenden naar de leverancier: Please confirm for the automatic panel wrapping machine shown in the demonstration video: (1) the minimum and maximum board length, width, thickness and weight; (2) boards per hour; (3) film type, width, thickness and number of layers; (4) how boards are fed and aligned on the conveyor; (5) what the control panel functions are; (6) fitted safety devices including emergency stops, guarding and certifications.
FAQ
Does the board rotate while wrapping? No. The board moves along the conveyor while the ring arm rotates around it, applying the film in a spiral.
What board types does it handle? The video shows a dark solid rectangular board. Ask the supplier which board and panel types, including wood, composite and coated panels, are accepted.
Wat laat de video zien over de bedieningselementen? No clear control panel or safety guard appears in the footage. Ask the supplier about the panel, settings and safety.
Gerelateerd lezen
- Automatic Panel Wrapping Machine / Packing Machine
- Orbitale rekwikkelaar
- Pas de orbitale wrapper aan
- Automatic Orbital Stretch Wrapper with Bubble Film Covering for Door Panel Furniture
- Horizontal Orbital Ring Stretch Wrapper for Sheet Metal Building Materials
- Horizontale stretchfolie voor papier en lichte producten
Volgende stap
Send the supplier your board sizes, target output and film requirements, and ask for the six verification figures from the checklist above.
Then confirm how boards are fed and aligned, since the video shows a worker helping position the board.
Then ask about the controls and safety package, because no control panel, emergency stop or guarding appears in the footage. Use the contact pagina om die uitwisseling te starten.
Laatst beoordeeld: 28-09-2026
Gepubliceerd: 2026-09-28
