エグゼクティブサマリー This test run in our workshop shows our rotating coil upender with no load. An orange L-shaped table with a V cradle tilts through 90°, and the whole table turns on its base, so a coil can be loaded from one side and leave from another. Our rotating models FPCT-05, FPCT-10 and FPCT-40 cover loads from 2,000 kg to 40 t with a turn time of 60–90 s. Below we explain the two motions, the data and a worked example for coils per hour.
目次
- クリップの内容
- 回転ベースを追加する理由
- Rotating coil upender data
- 1時間あたりのコイル数
- 選択チェックリスト
- 安全性
- エンジニアリングに関するよくある質問
- 次のステップ
- 関連する読書
- ソース
クリップの内容
The clip is a test run in our workshop, with the machine unloaded.
| 手順 | 何が見える |
|---|---|
| お気軽にご連絡ください | An orange L-shaped table with a V-shaped cradle sits on a dark grey base frame |
| 傾ける | The table tilts through 90°, so the V cradle and the flat table swap between horizontal and vertical |
| ローテート | The table turns on the base, so the open side of the cradle faces a new direction |
| 繰り返す | The tilt and turn are run again to show both motions together |
The two motions are separate: the tilt changes the coil eye from horizontal to vertical, and the turn changes which side the coil is loaded or taken from.
回転ベースを追加する理由
- Loading from one side, unloading from another. A crane or forklift can load the coil from the aisle, and the base turns so the coil leaves towards the next machine.
- Tight bays. The machine turns the coil instead of the forklift turning round it, which helps where there is little space.
- Eye-to-sky or eye-to-side. The 90° tilt sets the coil for a decoiler or for vertical storage, and the turn sets its direction.
- Stop at any angle. Position locking lets the table hold at any angle during the tilt.
Rotating coil upender data
Our published data for the rotating coil upender:
| Item | 公開価格 |
|---|---|
| Models | FPCT-05, FPCT-10, FPCT-40 |
| 最大荷重 | 2,000 kg～40 t |
| Upending angle | 90° |
| ベースローテーション | Base frame with rotating table for 180°; base function listed as 360° turning for the flipping table |
| 表 | Flat table L1,500 × W1,500 mm; V table L1,500 × W1,500 mm (customised) |
| Main turn time | 1個あたり60～90秒 |
| ステアリング位置 | Worm speed reducer, inverter soft start and stop |
| 安全性 | Electric and mechanical displacement limits; position locking at any angle |
| 出力 | About 4.0 / 5.0 / 15 kW, 380 V 50 Hz 3-phase |
For a standard tilt-only upender, our FPCT range covers 2–50 t with cycle times of 50–100 s and a 2-year warranty.
1時間あたりのコイル数
実例（例示） At a turn time of 90 s, one machine completes 3,600 ÷ 90 = 40 turns per hour. If each coil needs one tilt and one return, that is about 20 coils per hour, before crane or forklift time is added.
選択チェックリスト
- コイルの重量、外径、内径、幅。
- Tilt direction and whether you need the rotary base.
- Loading and unloading directions in your bay.
- Flat table, V table or both.
- 1時間あたりのコイル数。
- Floor condition, since the base has levelling adjustment for uneven floors.
安全性
The table tilts a heavy coil and the base turns it, so the swept area must be kept clear. We fit electric and mechanical travel limits, position locking and a separate control panel, and guard the zone to the risk assessment. For CE markets we apply ISO 12100:2010 and JP 415-10：2014.
エンジニアリングに関するよくある質問
Q: What does the rotary base add to a coil upender? A: It turns the table so the coil can be loaded from one side and taken off from another.
Q: How far does the table tilt? A: 90°, between eye-horizontal and eye-vertical.
Q: What loads can it take? A: Our rotating models cover 2,000 kg to 40 t.
Q: How long does one turn take? A: About 60–90 s per piece.
Q: Can it stop part way? A: Yes. Position locking lets the table stop at any angle.
Q: What table sizes are standard? A: Flat and V tables of L1,500 × W1,500 mm, customised to the coil.
Q: How many coils per hour? A: About 20 coils per hour at 90 s per motion with one tilt and one return.
Q：どの規格が適用されますか？ A：CE市場向けには、ISO 12100およびEN 415-10が適用されます。
次のステップ
We size a coil upender with rotary base in three steps:
- レイアウト図面を提出してください with coil weight and sizes, loading and unloading directions and coils per hour, to info@fhoppack.com.
- 48時間以内に提案書をお届けします 機械データとレイアウトと共に。
- 現地調査を予約する so we confirm the floor, crane and forklift access.
関連する読書
- 90°回転用油圧コイルチルト装置
- コイルアップエンダーと搬送トロリー
- Rail-Mounted Coil Transfer Car with 360° Cradle
- Rotating coil upender data
ソース
- Clip (our test run): YouTubeのビデオ
- Models, load, angle, base, tables, turn time, drive, safety and power: Rotating coil upender data
- FPCT range and warranty: Coil upender range
- 1時間あたりのコイル数：計算結果
- 規格の適用範囲：ISO 12100:2010; JP 415-10：2014
- 提案のタイミング：承認された下院CTA（48時間以内の提案）
最終更新日： 2026年10月10日
