FHOPE Gepäck-Stretchwickelmaschine

Executive summary A luggage stretch wrapper stands a suitcase on a turntable and winds clear stretch film round it, so the case is sealed against scratches, dirt and opening. Ours does this on a stainless turntable beside a tall column, with the film carriage running down the column as the case turns. Film use follows from the Fallabschnitt und Höhe, and the number of turns you program. Both are set per project.

Inhaltsverzeichnis

Was das Video zeigt

A suitcase stands upright on the round stainless turntable of our red and white wrapper. The table turns steadily, and clear film runs from the carriage on the tall column onto the case. The carriage moves down the column as the table turns, so the film builds up in a spiral from the top of the case to the bottom.

The film stays tight round the case and the layers overlap evenly. The control panel on the column carries two displays, a row of buttons and a stop button.

How the luggage wrapper works

Schritt Was ist loss
Laden Sie The case is stood upright in the middle of the turntable
Start Film is attached to the case and the cycle started
Spiralwickel The table turns while the carriage travels along the column
Enddrehungen Extra turns at top and bottom hold the film edges
Cut and unload The film is cut, the tail pressed down, the case lifted off

Standing the case upright keeps its handle and wheels clear, and the turntable keeps the film tension even all the way round.

Estimating turns and film

Illustrative example for a case 450 mm wide, 250 mm deep and 700 mm tall, with 500 mm film overlapping by half:

Artikel Wert
Case section perimeter, 2 × (450 + 250) 1,400mm
Filmbreite (beispielhaft) 500mm
Vorrücken pro Runde bei halber Überlappung 250mm
Spiralwindungen, 700 ÷ 250 über 3
Endumdrehungen, 2 oben und 2 unten 4
Gesamtumdrehungen über 7
Film laid on the case, 7 × 1.4 m ungefähr 9.8 m

More overlap gives a tougher cover but uses more film. Set the turns per case size in the program.

Where luggage wrappers are used

Ort Why the case is wrapped
Airport wrapping counters Schützt das Gehäuse und zeigt an, dass es nicht geöffnet wurde.
Luggage makers and shippers Keeps new cases clean on the way to the shop
Removal and storage firms Holds cases and boxes shut in storage

The same machine wraps other upright items of similar size, such as boxes and bundles.

Kontrollen und Sicherheit

The turntable and film carriage move during the cycle. The stop button at the foot of the control panel stops the machine. Keep hands off the case and the film while it is turning.

Die anzuwendenden Normen hängen vom Zielmarkt ab. Für CE-Märkte legt ISO 12100 die Risikobewertungsmethode fest und EN 415-10 die allgemeinen Anforderungen an Verpackungsmaschinen.

Selection checklist for a luggage stretch wrapper

  • Largest and smallest case size.
  • Cases per hour.
  • Turns and overlap you want.
  • Stellfläche und Stromversorgung.
  • Whether a counter or display is needed for paid wrapping.
  • Klare oder farbige Folie.

Häufig gestellte Fragen zur Technik

Q: Why stand the case upright? A: It keeps the wheels and handle clear and lets the turntable keep the film tension even.

Q: How many turns does a case need? A: Spiral turns plus end turns. Our 700 mm tall example needs about 7.

Q: How much film per case? A: Turns times the case perimeter. Our example lays about 9.8 m.

Q: Can it wrap other items? A: Yes. Boxes and bundles of similar size wrap the same way.

Q: How is the machine stopped? A: The stop button at the foot of the control panel stops it at once.

Nächster Schritt

We plan your luggage stretch wrapper in three steps:

  1. Reichen Sie Ihre Layoutzeichnung ein. with case sizes and output to info@fhopepack.com.
  2. Sie erhalten innerhalb von 48 Stunden ein Angebot., mit den Wendungen und dem Filmplan.
  3. Buchen Sie eine Standortbesichtigung um die Stellfläche und die Stromversorgung zu überprüfen.

Quellen

Letzte Überprüfung: 21.09.2026

Verwandte Artikel

Buchen Sie einen Anruf
Buchen Sie einen Anruf