آلة تعبئة وتغليف إطارات سيارات الركاب: تحديد المقاسات من رمز الإطار

ملخص تنفيذي

Selecting the correct orbital tyre wrapping machine for passenger car radial (PCR) tyres depends on precise calculation of outer diameter (OD), inner bead diameter (ID), and cross-section width directly from the sidewall tyre code. Standard machines operate within defined mechanical windows: the إف بي تي-200 covers tyre outer diameters of 510 – 800 مم, inner diameters of 300 – 700 مم, and widths up to سماكة 250 ملم, matching the vast majority of passenger vehicles. Larger SUV, 4×4, and light truck tyres (such as 265/70R17) often cross boundary dimensions, requiring verification against the heavy-duty إف بي تي-300 envelope (800–1,200 مم قطر خارجي، وتصل إلى عرض 300 مم, حمولة 100 كجم). This engineering guide outlines the dimensional formulas, kinematic cycle times, material tension controls, and mechanical clearance factors required to match your production batch with the correct packaging system.

How Does the Tyre Wrapping Process Work?

A vertical orbital tyre packing machine wraps stretch film or protective tape through the tyre center bore and around the toroidal cross-section (tread and both sidewalls). The operational kinematics follow a coordinated two-axis motion sequence:

  1. Tyre Infeed and Positioning: The operator or feeding arm positions the tyre vertically on two bottom polyurethane-coated drive rollers.
  2. مكوك الحلقة المدارية: The rotating ring carries the film tension dispenser. As the ring rotates through the internal bead diameter, the drive rollers rotate the tyre around its horizontal center axis.
  3. Helical Overlap Application: Synchronized dual variable frequency drives (VFDs) control the rotational ratio between the ring and the support rollers, maintaining an exact overlap pitch across the tread circumference.
  4. استقرار: An integrated pneumatic overhead press roller or bracket keeps lightweight or low-aspect-ratio tyres aligned on the drive rollers during rotation, eliminating vibration and axial skewing.
  5. إعادة ضبط الدورة: Upon completing the preset wrap layers, the ring automatically stops at its home position, allowing rapid unloading and immediate reloading for the next cycle.

How to Calculate OD and ID from the Tyre Code

Standard metric tyre designations (ISO metric sizing) define section width, aspect ratio, construction type, and wheel rim diameter. For example, in 205 / 55R16:

  • Section Width (W): 205 mm (nominal cross-section width from sidewall to sidewall).
  • نسبة العرض إلى الارتفاع (AR): 55% (sidewall height expressed as a percentage of nominal width).
  • البناء والتشييد: R (Radial construction).
  • Rim Diameter (RD): 16 inches (1 inch = 25.4 mm).

صيغ الحساب:

  • Sidewall Height (SH): SH = W × (AR / 100)
  • القطر الخارجي (OD): OD = (RD × 25.4) + (2 × SH)
  • Internal Bead Diameter (ID): ID ≈ RD × 25.4 (approximate opening clearance at the bead seats).
رمز الإطار Nominal Width (W) Sidewall Height (SH) الكثافة الضوئية المحسوبة Bead ID (Approx.) Compatible Standard Machine
175 / 65R14 سماكة 175 ملم سماكة 113.8 ملم سماكة 583 ملم سماكة 356 ملم إف بي تي-200
205 / 55R16 سماكة 205 ملم سماكة 112.8 ملم سماكة 632 ملم سماكة 406 ملم إف بي تي-200
225 / 45R18 سماكة 225 ملم سماكة 101.3 ملم سماكة 660 ملم سماكة 457 ملم إف بي تي-200
265 / 70R17 سماكة 265 ملم سماكة 185.5 ملم سماكة 803 ملم سماكة 432 ملم Boundary / Custom Engineering

Calculation Example (205/55R16): OD = (16 × 25.4) + (2 × 205 × 0.55) = 406.4 + 225.5 = 631.9 mm (rounded to 632 mm). The bead inner diameter is 16 × 25.4 = 406.4 mm (ما يقارب 406 mm), confirming that both dimensions sit within the processing window of the FPT-200.

Which Model Fits My Tyre Specifications?

Machine selection depends on confirming that the tyre outer diameter, inner bead opening, cross-section width, and unit weight fall inside the continuous operating envelope.

معامل FPT-200 (Standard PCR Window) FPT-300 (SUV / Light Commercial Window)
Tyre Outer Diameter (OD) 510 – 800 مم 800 – 1,200 مم
Tyre Inner Diameter (ID) 300 – 700 مم 500 – 900 مم
Tyre Cross-Section Width 40 – 250 مم 80 – 300 مم
Maximum Tyre Weight كجم 30 كجم 100
Rotating Ring Speed 0-120 دورة في الدقيقة (يتم التحكم فيها بواسطة محرك التردد المتغير) 30-110 دورة في الدقيقة (يتم التحكم فيها بواسطة محرك التردد المتغير)
Net Wrapping Cycle Time 18–30 seconds per tyre 25–40 seconds per tyre
معدل قدرة المحرك 1.5 كيلو واط 2.0 كيلو واط

Sizing and Stacking Considerations:

  • Single-Tyre Processing: The width boundary (250 mm on FPT-200; 300 mm on FPT-300) is engineered for single-tyre wrapping. Bundling two 205 mm tyres yields a total width of 410 mm, exceeding the throat opening of standard PCR orbital rings. Multi-tyre bundling requires dedicated long-stroke horizontal wrapping systems.
  • Structural Weight Ceilings: Reinforced run-flat tyres, heavy all-terrain (A/T) designs, and commercial light truck tyres can exceed 30 kg. Even if the OD measures under 800 mm, tyres over 30 kg should be routed to the FPT-300 to prevent premature wear on the support roller bearings and drive transmission.

What Happens if My Tyre Size Falls Between Models?

Certain large SUV and all-terrain tyres land directly on dimensional boundaries. A prime example is 265 / 70R17:

  • OD: 803 mm (slightly exceeds the 800 mm limit of FPT-200).
  • Bead ID: 432 mm (falls below the 500 mm standard minimum inner diameter of FPT-300).
  • عرض: 265 mm (exceeds the 250 mm maximum width limit of FPT-200).

Because this tyre meets neither standard envelope off the shelf, factory mechanical adjustments are required:

  1. Expanding the FPT-200 Frame: Modifying the roller center-to-center distance and extending the ring clearance arch to accept an 803–820 mm OD and 270 mm width while preserving the low 300 mm ID capability.
  2. Adapting the FPT-300 Shuttle Path: Customizing the film roll carriage assembly to allow inward reach into a 430 mm bead cavity on an otherwise large-diameter ring.

Submitting your complete SKU matrix prevents envelope mismatch before equipment manufacturing.

How Long Does Wrapping Take? Cycle Time Analysis

Packaging cycle time consists of net machine wrapping time plus material handling (loading and unloading). The table below compares cycle calculations on an FPT-200 running single-operator manual loading:

خطوة العملية Fast Tyre (e.g., 175/65R14, Light Wrap) Standard/Heavy Tyre (e.g., 225/45R18, Dense Overlap)
Net Ring Wrapping Time 18 ق 30 ق
Manual Load & Unload Allowance 15 ق 15 ق
Total Cycle Time per Tyre 33 ق 45 ق
Theoretical Continuous Output ~109 tyres/hour 80 إطارًا/ساعة

ملاحظة تشغيلية: Actual shift throughput depends on operator pacing, film roll replacement intervals, and line integration. Integrating an inline pneumatic roll-in/roll-out ramp or automated gravity ejector reduces handling time from 15 seconds down to 5–8 seconds.

What Materials and Overlap Settings Are Used?

The wrapping carriage accommodates multiple industrial protective films depending on transit protection criteria:

  • المواد الاستهلاكية المتوافقة: Polyethylene (PE) film, LLDPE stretch film, circular woven PP knit belt, anti-rust VCI film, and composite kraft/crepe paper.
  • Overlap Regulation: مجموعة بين 10% و 80% via inverter-controlled speed differentials between the ring motor and bottom roller motor.
  • مراقبة التوتر: Maintained via a mechanical friction brake roller system with micro-adjustment springs to prevent bead distortion on soft PCR sidewalls while guaranteeing tight puncture-resistant containment.
  • Logo and Branding Striping: An auxiliary unpowered dispenser applies a narrow continuous printed logo band around the tyre OD simultaneously during the outer wrapping passes.

Utility and Safety Specifications

المعايير الهندسية إف بي تي-200 إف بي تي-300
مصدر كهربائي قياسي AC 380 V, 50 Hz, 3-Phase (60 Hz / 220 V / 480 V optional) AC 380 V, 50 Hz, 3-Phase (60 Hz / 220 V / 480 V optional)
القدرة الكهربائية المركبة 1.5 كيلو واط 2.0 كيلو واط
Pneumatic Air Requirement 0.4–0.6 MPa (used with top stabilizer / auto-clamp) 0.4–0.6 MPa (used with top stabilizer / auto-clamp)
Safety Standard References آيزو 12100:2010، إن 415-10:2014 آيزو 12100:2010، إن 415-10:2014

Mechanical guards, perimeter protective mesh, and emergency stop interlocks isolate the rotating ring area. Drive motors incorporate dynamic braking for rapid shutdown upon safety circuit interruption.

What Data Must You Provide for a Firm Configuration?

To confirm ring clearance, roller center spacing, and drive power, please provide:

  • Complete list of tyre size codes (smallest OD/ID up to largest OD/ID).
  • Maximum section width (inflated or uninflated bead state).
  • Tyre weight range (minimum and maximum in kg).
  • Wrapping material type (Stretch film, woven PE/PP tape, or paper).
  • Target production capacity (tyres per hour or tyres per shift).
  • Plant operating voltage, phase, and utility frequency (V / Hz / Phase).

أسئلة وأجوبة هندسية

Q: Can one vertical tyre wrapper handle both small PCR and heavy truck (TBR) tyres? A: No. Truck and bus radial (TBR) tyres typically exceed 1,000–1,300 mm التطوير التنظيمي، 250–350 mm width, and weigh between 50 kg و 90 kg. A standard PCR wrapper lacks the ring throat opening and structural roller load capacity for truck lines.

Q: How does aspect ratio affect machine wrapping? A: Low-aspect-ratio tyres (e.g., 35–45 series) have stiff, narrow sidewalls that require steady top press-roller pressure to avoid tracking drift. High-aspect-ratio tyres (e.g., 70–80 series) are more flexible and demand careful tension adjustment on the film brake to avoid pulling the bead inward.

Q: Can the machine run without an air compressor? A: If the wrapper relies strictly on manual tyre positioning without pneumatic top stabilization or auto-ejection kits, it can function purely on electrical power. If fitted with pneumatic stabilizing arms, an industrial supply of 0.4–0.6 MPa clean air is required.

Technical Consultation and Next Steps

To evaluate your tyre size distribution against our standard and custom wrapping rings:

  1. Submit Your Specification Sheet: Send your tyre code list, target shift volume, and line layout drawing to our engineering department at info@fhopepack.com.
  2. Dimensional Matrix Verification: Our packaging engineering team maps your min/max dimensions against our kinematic throat database within 24–48 hours.
  3. Application Proposal: Receive a certified dimensional validation sheet, machine outline drawing, and project quotation.

Related Documentation and Catalog Resources

المعايير والمراجع الفنية

منشورات ذات علاقة

احجز مكالمة
احجز مكالمة