E100 Горизонтальная упаковочная машина

Резюме This roughly 48-second clip demonstrates an E100 horizontal stretch wrapping machine wrapping a long, flat white sheet. A roller conveyor carries the workpiece from left to right while an arched wrap arm descends and rotates around it, drawing stretch film along the length of the product. An operator supervises from a control panel with a red emergency-stop button on the right side. Rated capacity, dimensions, cycle time, and other specifications do not appear in the footage and must be confirmed with the manufacturer.

The E100 at a glance

Эта машина горизонтальная стретч-пленка, sometimes called an orbital wrapper. Unlike turntable machines that rotate a pallet, a horizontal wrapper feeds the workpiece lengthwise through a wrap zone while the film carriage orbits around it. The footage shows the machine in motion with a real product, which makes the overall concept clear.

В видеоролике показаны следующие основные части:

• Arch frame: a blue-painted curved metal frame over the conveyor line.
• Рукав с обмоткой: an arched arm that lowers onto the workpiece and rotates to wrap film around its full circumference along its length.
• Роликовый конвейер: a yellow conveyor built from rollers (blue base) that moves the product from left to right through the machine.
• Панель управления: located on the right side of the machine, at operator height.

The layout is horizontal and straight-through: the product enters on the left, passes under the rotating wrap arm, and continues out the right side.

Что показано на видео

The clip follows a single long white panel as it moves through the machine.

The film is applied by the rotating arm rather than by a fixed ring passing over the product, which is typical of this class of horizontal wrapping equipment.

Operator and control panel

One operator manages the cycle from a control panel at the right side of the machine. In the close-up the panel shows a красная кнопка аварийной остановки, чтобы зеленая кнопка запуска, a black stop button, and red and green indicator lamps. A warning label is present on the panel, though the text is not readable in the footage. The operator works while wearing an orange safety helmet, and a second worker appears briefly on the far side of the machine.

Примечания по контролю и технике безопасности

• An кнопка аварийной остановки is clearly visible on the control panel.
• No physical fence encloses the wrap arm area in this demonstration.
• No light curtain is observed in the footage.
• No interlock device is observed.
• The warning label on the panel is too blurred to read.

A production installation is likely to include additional guarding around the wrap zone; any guarding, interlock, or light-curtain configuration should be confirmed with the supplier.

Заметки о непосредственных наблюдениях

• Структура машины: the frame and arch arm are finished in blue; the roller conveyor’s base is blue and its rollers are yellow. The machine is laid out horizontally with the workpiece moving along the line.
• Заготовка: one long, flat, white sheet or profile — length is much greater than its width and height — with a smooth surface, moving horizontally from left to right with its orientation unchanged.
• Последовательность: the product is fed from the left, the arch arm lowers, the wrap arm rotates around the product as it advances, and the wrapped product exits to the right.
• Окружающая среда: a busy workshop background with other equipment and materials; the machine appears to be running as a live demonstration.

Чего не показано в видео

• Rated capacity (for example, pieces per hour).
• Maximum product length, width, and height that the wrapper accepts.
• Film specifications: width, thickness, and pre-stretch.
• Whether film cut and tail sealing are automatic.
• Требования к электропитанию и управлению.
• Cycle time for a completed wrap on this run.
• Сертификационные знаки или рейтинги безопасности.
• Changeover or setup between different product sizes.

None of these details can be read in the footage; all should be confirmed with the manufacturer.

Is a horizontal wrapper right for your product?

Что нужно уточнить у производителя?

1. Confirm the dimensions and weight of your longest product against the wrapper’s accepted envelope.
2. Confirm the required throughput in pieces per hour.
3. Confirm film width and thickness, and whether pre-stretch is available.
4. Проверьте наличие пакета мер безопасности: ограждения, световой завесы, блокировок и места для аварийной остановки.
5. Confirm power requirements and how the machine integrates with your existing conveyor and control system.

Часто задаваемые вопросы

Is this the same as a turntable stretch wrapper? No. A turntable wrapper rotates the pallet and keeps the film head still; this horizontal wrapper feeds the product straight through while the film carriage orbits around it. That makes it suitable for long, straight products rather than palletized loads.

Does the wrap arm rotate around the product or does the product spin? The product stays flat on the conveyor in the clip; the arched wrap arm lowers over it and rotates. The film is dragged through rotation around the product as it travels.

Can it wrap products of different lengths? The machine wraps whatever passes through the wrap zone, so different lengths are generally handled without a new cycle definition; the maximum envelope depends on the model. Confirm with the supplier.

Цикл автоматический? The demonstration runs with an operator supervising the panel, so the level of automatic one-button operation depends on the configuration you choose.

How is the film cut and sealed at the end? The footage does not show the cut-and-seal step. Confirm whether the model includes automatic film cutting and tail sealing.

Почему важна горизонтальная обертка

Long, straight products — sheets, panels, profiles, extrusions, and similar parts — are hard to wrap consistently by hand. A horizontal wrapper applies film around the full circumference along the whole length, holding the product together, protecting the surface, and keeping the bundle stable for transport and storage. Because the workpiece moves straight through a fixed wrap zone, the process is repeatable piece after piece, and one operator can supervise the line instead of wrapping each item manually.

Источник и метод

Наблюдения, представленные в этой статье, взяты из встроенного выше видео на YouTube (идентификатор видео). R1e_UobX5Ss). Frames were extracted from the footage and analyzed with a local vision-language model in roughly 2-second intervals over approximately 48 seconds. The footage has background music and no narration to transcribe. Facts that cannot be read in the video — rated capacity, dimensions, film details, safety devices, certifications — are marked as unconfirmed rather than filled in.

Связанное чтение

• Автоматическая горизонтальная упаковочная машина и орбитальная упаковочная машина
• Горизонтальная орбитальная стрейч-обертка для обвязки и обмотки поддонов
• Горизонтальная стретч-упаковка для легкой бумажной продукции
• Горизонтальная кольцевая орбитальная машина для стретч-пленки
• Орбитальная горизонтальная стретч-упаковочная машина для двигателя и лотка.

Следующий шаг

If your products are long, flat, or straight and you wrap them by hand today, the E100 horizontal wrapper shown in this video is worth checking against your part dimensions and line speed. Confirm the maximum product envelope, throughput, film options, and safety configuration with FHOPE before ordering. For contact details, visit Видео FHOPE, контактыили воспользуйтесь формой на веб-сайте, чтобы запросить технические характеристики вашей продукции.

Последнее обновление: 2026-08-31.