Hydraulische kiepwagen met bak en laadbak

> **Samenvatting voor de directie**
> A tote tipper lifts a box or tote and turns it over, so the contents pour out at height without anyone lifting the load by hand.
> Ours lifts the box on a chain drive in a grey frame and tips it, powered by a compact hydraulic unit at its side.
> Output follows from the **lift, tip and return times**, set per project to your boxes and discharge height.

Inhoudsopgave

Wat de video laat zien

De video begint met een close-up van de hijskettingen en tandwielen, met de hydraulische cilinder ertussen. In het onderschrift wordt het een hef- en kantelmachine genoemd. De camera zoomt vervolgens uit naar de complete machine op een groene fabrieksvloer.

Het grijze frame draagt ​​de doosdrager aan de voorkant. Een blauwe hydraulische aandrijving staat ernaast. In de volgende beelden wordt de drager opgetild en gedraaid, de beweging die een volle doos maakt om zijn inhoud te legen.

Hoe de kantelbak werkt

| Stap | Wat gebeurt er?
|---|---|
| Load | The box or tote is set in the cradle at floor level |
| Lift | The cylinder drives the chains, raising the cradle up the frame |
| Tip | At the top the cradle turns over and the box empties |
| Return | The cradle turns back and lowers to the floor |

De houder houdt de doos vast terwijl deze kantelt, zodat de doos op zijn plaats blijft terwijl de inhoud eruit stroomt. De kettingaandrijving vermenigvuldigt de slag van de cilinder, waardoor de doos veel verder omhoog komt dan de cilinder beweegt. De hydraulische unit houdt de lading stabiel op elk punt in de hefbeweging.

Het schatten van de cyclus

Illustratieve cyclus voor één doos:

| Step | Time (illustrative) |
|---|---|
| Lift | 10 s |
| Tip | 5 s |
| Hold to empty | 10 s |
| Return and lower | 15 s |
| Total per box | 40 s |
| Boxes per hour, 3,600 ÷ 40 | about 90 |

Kleverige of compacte inhoud vereist een langere bewaartijd. Tel de tijd mee die nodig is om elke doos naar de houder te brengen en weer op te halen.

De kiepbak afstemmen op de doos

| Check | Why it matters |
|---|---|
| Box size and shape | The cradle is built to hold it |
| Full box weight | Sets the cylinder and frame |
| Discharge height | Sets how far the box must rise |
| Where it pours | A hopper, conveyor or machine inlet below the tip point |

Meet het gewicht van de volle doos, niet van de lege, en vertel ons waar de inhoud van de doos in past.

Bediening en veiligheid

De wieg, kettingen en bak bewegen tijdens de cyclus. Houd mensen uit de buurt van het liftpad en het gebied onder het kantelpunt terwijl de lift draait.

De geldende normen zijn afhankelijk van de bestemmingsmarkt. Voor CE-markten beschrijft ISO 12100 de risicobeoordelingsmethode en EN 415-10 de algemene eisen voor verpakkingsmachines.

Selectiechecklist voor een kantelbak

- [ ] Box or tote size and full weight.
- [ ] Discharge height and what it pours into.
- [ ] Boxes per hour.
- [ ] Contents: loose, sticky or packed.
- [ ] Floor space.
- [ ] Power supply on site.

Veelgestelde vragen over techniek

Q: What does a tote tipper do?
A: It lifts a box or tote and turns it over, so the contents pour out at height.

Q: Why a chain lift?
A: The chains multiply the cylinder stroke, so the box rises further than the cylinder moves.

Q: How many boxes per hour?
A: 3,600 divided by the cycle time. Our 40 s machine cycle gives about 90, before the time to bring each box in and take it away.

Q: How high can it lift?
A: That is set per project from the height your hopper or machine inlet needs.

Q: What powers it?
A: A hydraulic power unit beside the frame.

Volgende stap

Wij ontwerpen uw kantelbak in drie stappen:

1. **Submit your layout drawing** with box size and weight to **info@fhopepack.com**.
2. **Receive a proposal within 48 hours**, with the discharge height and cycle.
3. **Book a site survey** to check the floor space and power.

- [Video: box dumper operation and test](https://www.fhopepack.com/videos/box-dumper/)
- [Video: automatic crate and tote dumper](https://www.fhopepack.com/videos/automatic-crate-and-tote-dumper/)
- [Pallet inverter](https://www.fhopepack.com/pallet-inverter/)

Bronnen

- Machine-inhoud: FHOPE-engineeringteam, 10-04-2026
- Cycle example: our worked example, illustrative values
- Machine in action: [our video on YouTube](https://www.youtube.com/watch?v=zSTejfPZgKs)
- Normbereik: [ISO 12100:2010](https://www.iso.org/standard/51528.html), [EN 415-10:2014](https://www.nen.nl/en/nen-en-415-10-2014-en-191845)

Laatst beoordeeld: 04-10-2026