Kopsavilkums
Books and magazines move in low stacks that shift unless they are banded, and hand strapping each stack slows a distribution line. This compact band strapping machine takes a stack from its own infeed table, carries it across the black belt, and an overhead head applies a band around the stack and seals it. The operator loads one stack and takes the next finished one. Bundle height and band size are confirmed per project.
Saturs
- Why band stacks of paper
- Ko mašīna dara
- Infeed and belt
- Banding head
- Ko rāda videoieraksti
- Tipiski konfigurācija
- Atlases kontrolsaraksts
- Darbība un drošība
- Inženierijas bieži uzdotie jautājumi
- Nākamais solis
- Saistītā lasāmviela
- Avoti un standarti
Why band stacks of paper
A stack of books or magazines slides apart at the edges and takes handling time in a distribution line. A band holds the stack square so it moves and stores as one unit.
Banding each stack as it passes keeps the line moving without tying by hand. Stack size is confirmed per project.
Ko mašīna dara
The machine applies a band around stacks of books or magazines. The stack, whether books, magazines or boxed items, moves in on an infeed table onto a black twin belt, and an overhead banding head wraps and seals a band around it.
The operator feeds one stack and takes the next banded one from the outfeed side. Stack size and band pitch are confirmed per project.
Infeed and belt
The operator places a stack on the infeed table, and a black twin belt carries it to the banding position. The belt moves the stack at a steady pace so the band lands on the same place each cycle.
A short, compact belt suits a bench-level line. Stack height and feed pace are confirmed per project.
Banding head
An overhead head lowers over the stack, wraps the band around the bundle and seals it. The head returns and the stack moves on to the outfeed.
The vertical head keeps the band square over the stack. Band width and sealing method are confirmed per project.
Ko rāda videoieraksti
Our footage shows a stack being placed on the infeed, moving across the belt, the overhead head applying a band, and the operator taking the finished bundle from the outfeed. It is a general demonstration, so your stack size and band size are confirmed with us per project.
Tipiski konfigurācija
Zemāk redzamajos attēlos ir norādītas funkcionālās dizaina robežas, nevis skaitliskās vērtības, un tie tiek apstiprināti katram projektam.
| Parametrs | Tipisks diapazons, apstiprināts katram projektam |
|---|---|
| Slodze | stack of books or magazines |
| Ievads | table, twin belt |
| Orķestris | overhead head |
| Cikls | load, band, take |
| Kontrole | PLC un HMI |
| Elektroapgāde | 380 V trīsfāžu 50 Hz vai 220 V vienfāzes vieglajām mašīnām, tiek izvēlēts katram projektam atsevišķi |
Atlases kontrolsaraksts
| jautājums | Apstiprināt katram projektam |
|---|---|
| Steka izmērs | height, width, weight |
| Orķestris | width, type, tension |
| Piķis | bands per stack |
| Cikls | time per stack |
| Izkārtojums | bench height, space |
| Elektroapgāde | spriegums, fāze un frekvence uz vietas |
Darbība un drošība
Place a stack on the infeed and start the cycle; the belt carries it to the head, the band wraps and seals, and the operator takes the finished bundle from the outfeed. Keep clear of the head and the belt while the machine runs.
Routine checks cover the belt, the banding head and the sealer, per the machine manual. Confirm the stack is straight before banding.
Inženierijas bieži uzdotie jautājumi
Q: What does this machine do? A: It applies a band around stacks of books, boxes and magazines.
Q: Why band the stacks? A: A band holds the stack square so it moves and stores as one unit.
Q: How does the stack move? A: A twin belt carries it from the infeed table to the banding head.
Q: How is the band applied? A: The overhead head wraps a band around the stack and seals it.
Q: What does it suit? A: Books, magazines and boxed items moving in low stacks.
Nākamais solis
- Email us at info@fhopepack.com with your stack size and output.
- We send a strapping machine proposal and a layout sketch within 48 hours.
- We confirm the band size and cycle against your stacks.
Saistītā lasāmviela
- Integrated automatic band strapping machine
- Automatic pipe bundling, strapping and bagging machine
- Automātiskā dēļu iepakošanas līnija
- FHOPE iepakošanas iekārtu produktu līnijas
Avoti un standarti
- ISO 12100:2010 Mašīnu drošība, vispārīgie projektēšanas principi un riska novērtēšana
- EN 415-10:2014 Iepakošanas mašīnu drošība, vispārīgās prasības
- EN ISO 13849-1:2023 Mašīnu drošība, ar drošību saistītās vadības sistēmu daļas
FHOPE integrated automatic band strapping machine demonstration video. Reviewed as a general demonstration; stack size and band size confirmed per project.
Pēdējoreiz pārskatīts: 2026-10-11
