궤도형 포장기: 완벽 가이드

개요 An orbital wrapping machine passes a long product through a turning ring that spirals stretch film round it. Our range runs from manually loaded semi-automatic wrappers to automatic line machines, taking products up to 400 mm across inside a larger ring. The ring size and the length and weight limits decide which model fits. A worked example matches three products to our models.

차례

궤도 래핑은 어떻게 작동할까요?

The product lies flat and moves along its own axis. A ring stands upright round its path and turns, carrying a film roll with it. As the product moves forward, the film lays down in a spiral from one end to the other.

Two speeds set the result. The ring speed sets how many turns go on per minute. The conveyor speed sets how far the product moves per turn. Their ratio fixes the overlap between one turn of film and the next.

The main parts and what each does

  • 반지. A large upright ring, turned by friction drive wheels. Guide rollers round its edge keep it running true.
  • Film carriage. Fixed to the ring, it holds the roll and sets the film tension.
  • Entrance and outlet conveyors. Motor-driven rollers carry the product in and out at an adjustable speed.
  • Control box. Start buttons and a red mushroom-head emergency stop on the simple models; a PLC and touch screen on the automatic ones.
  • 광전지. On the automatic models it detects the product and sets the wrapping position.

A semi-automatic cycle, step by step

  1. The operator lays the profile on the entrance conveyor and pushes its front end into the ring.
  2. The operator attaches the film tail to the front of the product.
  3. The operator presses the green start button at the control box and steps back.
  4. The ring turns and the conveyor feeds the profile through, wrapping it in a steady spiral.
  5. At the far end the ring stops, and the operator cuts the film and unloads the profile.

수동, 반자동 또는 자동

Most of our ring sizes are available in manual, semi-automatic and automatic versions. The ring and conveyors work the same way in all three. What changes is who loads, starts and finishes.

On a semi-automatic wrapper the operator loads and cuts. An automatic wrapper adds a PLC, a photocell and an automatic film feeder and cutter, so it runs unmanned on a packing line. Choose automatic when the operator’s load and cut time, not the ring, limits output.

Our orbital wrapper range at a glance

모델 제품 크기 길이 중량(평량) 조작
경제 궤도 래퍼 50~200mm 외경 1,500mm 이상 우리에게 물어봐. 반자동
S200 10~200mm 외경 300mm 이상 10~100kg 반자동
S300 50~300mm 외경 1,000mm 이상 우리에게 물어봐. semi-automatic, auto cut
E300 50~300mm 외경 1,000mm 이상 15~100kg 자동적으로
E400 100~400mm 외경 1,200mm 이상 15~100kg 자동적으로

The E300 and E400 take film 100 to 200 mm wide and wrap at 5 to 15 m/min and 5 to 25 m/min.

On the E300, 50 mm is the smallest section for a stiff product. A soft or flexible product can bend under film tension as it passes through the ring, so it needs about 100 mm. The real minimum depends on how stiff your product is, so we check it on your sample.

Worked example: matching three products to a model

Take three products from one plant. These are illustrative customer figures.

  • A. One aluminium profile, 60 × 40 mm, 6,000 mm long, 7 kg.
  • B. A bundle of square tubes, 100 × 100 mm overall, 3,000 mm long, 45 kg.
  • C. A round bundle of PVC pipe, 250 mm across, 4,000 mm long, 30 kg.

Size through the ring. A rectangular section must clear the ring by its diagonal. A measures √(60² + 40²) = 72 mm, B measures √(100² + 100²) = 141 mm and C measures 250 mm.

모델 A: 72 mm, 7 kg B: 141 mm, 45 kg C: 250 mm, 30 kg
간결한 맞다 맞다 너무 큰
S200 below 10 kg minimum 맞다 너무 큰
S300 맞다 맞다 맞다
E300 below 15 kg minimum 맞다 맞다
E400 below 100 mm and 15 kg 맞다 맞다

Why weight limits matter. The minimum weights on the S200, E300 and E400 matter because film tension pulls on the product every turn. A piece that is too light can be dragged off line, so we check light profiles before quoting.

결과. The S300 is the only model that takes all three. If you need automatic wrapping, bundle profile A two by two into 120 × 80 mm. That measures 144 mm across the corners and weighs 28 kg, inside the E300 range.

시각. On the E300, a 6,000 mm bundle passes at 5 to 15 m/min, so wrapping takes 6 ÷ 15 to 6 ÷ 5 min, or 24 to 72 s. The overlap you choose sets where in that range you run.

선정 체크리스트: 저희에게 보내주실 자료

  1. Cross-section of every product, with width, height or diameter.
  2. 가장 짧은 길이와 가장 긴 길이.
  3. Weight of the lightest and heaviest piece.
  4. Pieces per hour and shifts per day.
  5. Whether you need manual, semi-automatic or line operation.
  6. Wrapping material: stretch film, PE foil, paper or woven.

안전 및 EN 415-10

We design our orbital wrappers to EN 415-10 for packaging machines, with an ISO 12100 risk assessment. The turning ring, its drive wheels and the conveyor in-running points are the main hazards. A guardrail protects the ring, and the emergency stop sits on the control box within the operator’s reach. On manually loaded models the operator steps back before pressing start.

엔지니어링 FAQ

Q: What can an orbital wrapper wrap besides stretch film? A: Depending on the model, PE foil, paper, PP and woven tape.

Q: Can the overlap be changed? A: Yes. Overlap adjusts from 10% to 90% on our ring wrappers.

Q: What floor does an automatic wrapper need? A: Flat, hard ground rated over 1 ton/m², as for our E300.

Q: 어떤 안전 기준이 적용되나요? A: CE 인증 시장에서는 기계 자체에 대해서는 EN 415-10, 위험 평가에 대해서는 ISO 12100이 적용됩니다.

다음 단계

  1. Email your product sections, lengths and weights 에 info@fhopepack.com.
  2. 24시간 이내에 제안서를 보내드리겠습니다., with the model that fits all your products.
  3. 배치도를 보내드립니다. 포장기와 컨베이어의 일부입니다.

지우면 좋을거같음 . SM

  • Specifications: FHOPE product pages for the economic orbital wrapper, S200, S300, E300 and E400
  • 기계 영상: orbital wrapping machine on YouTube
  • Product sizes, fit and time: our worked example, illustrative product figures
  • 표준: EN 415-10(포장 기계, 일반 안전); ISO 12100:2010

최종 검토일: 2026년 10월 17일

관련 게시물

전화 예약
전화 예약