خلاصه اجرایی: An online automatic cable line that coils, straps, shrinks and palletizes promises one continuous flow, and its name lists five steps. This page is for buyers deciding whether an auto online cable coiling, strapping, shrinking and palletizing stacking packing line fits their floor. It explains the stations the footage shows, which of the promised steps it actually proves, and the questions that turn the promise into a defensible purchase.
https://www.fhopepack.com/Cable-packing-machine/
در این صفحه: این صفحه به شما در تصمیم‌گیری چه کمکی می‌کند؟ · Why one line beats five islands · How the line feeds and treats the cable · How the robot carries the coil · آنچه تصویر ایمنی نشان می‌دهد · آنچه کلیپ نشان می‌دهد · چک لیست تایید خریدار · سوالات متداول · خواندن مرتبط · مرحله بعدی
Caption: An automatic cable packing line. Product-library reference image, not a still from the clip.
این صفحه به شما در تصمیم‌گیری چه کمکی می‌کند؟
A line carries its own story in its name: coiling, strapping, shrinking and palletizing in one continuous flow. That story is exactly what a buyer should test, because a long automated line is only worth its price when every named step actually runs in sequence.
This page turns the footage into that test. It names the stations the camera shows, and it separates the steps that appear on screen from the steps that are only implied. The boundary between “shown” and “implied” is the whole basis of a negotiable quotation.
Why one line beats five islands
Cable finishing can be laid out as separate machines with hand-carrying between them, or as one line with the cable and coils moving automatically across the floor. The single-line layout wins on two points: the coils spend less time waiting on pallets, and the product is touched by far fewer hands, which keeps each finished coil identical.
The line also holds the work at a consistent pace. A machine on its own runs as fast as its operator loads it, while a line paces every station to the same rhythm, so the bottleneck becomes visible and fixable instead of hidden.
The honest cost is complexity. A line that joins a coil maker to a shrink cabinet to a palletizer has more moving parts, more controls and more things to specify correctly. That is why the footage matters: it shows how much of the flow is actually in place.
How the line feeds and treats the cable
The tour starts at the feed side. A thin cable enters low down from the left, passes through a bank of guide rollers, and runs through a covered forming section under an orange protective shroud. From there it reaches a silver die and then an open stainless-steel trough, where the line straightens and carries the cable forward under a suspended exhaust hood.
Workers in blue shirts move around the area, a forklift travels the aisle, and tall wrapped coils wait on the floor at the far side. A control cabinet by the covered section carries an HMI screen, switches and red, green and yellow lamps. A second cabinet holds a red emergency-stop button and a red digital gauge whose value cannot be read at that distance.
The feed section proves the continuous part of the story: cable enters, is guided and formed, and leaves the covered section on a trough without a hand diverting it. Nothing on screen states the speed, the forming temperature or the cable ranges the line accepts.
Caption: A cable packing machine. Product-library reference image, not a still from the clip.
How the robot carries the coil
The clearest action in the footage comes later in the tour. Red cable coils, about the size of a dinner plate, ride in on a flat conveyor of steel cylinders. A yellow six-axis robot arm reaches in, picks one coil, lifts it and carries it across the work area toward a tall silver box structure that houses the shrink or strapping unit.
Beside the silver box a label unit feeds a red-and-white label tape, ready to mark the finished coils. A control panel in the robot cell shows a screen with a green running lamp, multiple coloured buttons and a red mushroom emergency-stop button, and the floor around the cell wears yellow-and-black warning stripes.
Two details deserve the buyer’s attention. First, the transfer to the silver box is where the strapping and shrinking are supposed to happen, and the camera stops at the doorway. Second, the tour ends among the red coils, so the pallet-building that the line name promises is never shown in the same continuous clip.
آنچه تصویر ایمنی دستگاه نشان می‌دهد
The safety picture in the footage is strongest at the robot cell. The control panel carries a red mushroom emergency-stop button and a green running lamp, the floor shows yellow-and-black warning stripes around the cell, and a yellow triangular warning pictogram appears by the panel. Around the robot’s travel arc that is the main visible protection.
At the feed and treating side the picture is quieter: the covered forming section sits under an orange shroud, but the footage does not show a full fence or light curtain around that area. The exhaust hood overhead points to fume management, yet no ventilation rating appears.
The caution is practical. A long line has several risk zones, and a tour shows only a few of them. Ask for the safety device list per station, and never read the whole safety story from the clip.
آنچه کلیپ خط تولید ماشین نشان می‌دهد
What the video shows is a shop-floor tour of an automatic cable line. A thin cable enters low on the left and passes through guide rollers, a covered forming section under an orange shroud, and an overhead exhaust hood.
It then runs along a stainless-steel trough past control cabinets and a red gauge that cannot be read. Later in the footage, red cable coils ride in on a cylinder conveyor, and a robot lifts one toward a tall silver box.
A label unit feeds red-and-white tape beside the box, and the tour ends among the coils and wrapped reels. The photos on this page are product-library reference images, not stills from the clip. Direct observation notes from the sampled frames, not a performance test.
The clip does not show the line speed, the coiling cycle, the strapping or shrinking action inside the silver box, the pallet-stacking sequence, the coil size range, a model or power rating, or any certification. No readable text or brand appears anywhere in the footage.
The line name promises five steps. What the footage actually proves is the feeding and forming, the robot transfer, and the approach to the finishing box. The strapping, the shrinking and the palletizing remain to be confirmed in writing.
عنوان: خط سیمپیچ و بستهبندی خودکار کابل. تصویر مرجع از کتابخانه محصولات، نه یک تصویر ثابت از کلیپ.
چک لیست تایید خریدار
پنج سوال مشخص می‌کند که آیا این جمله با نامش مطابقت دارد یا خیر. آنها را به صورت کتبی بپرسید و پاسخ‌ها را همراه با نقل قول نگه دارید.
| از تامین کننده بخواهید | چرا خرید را تعیین می‌کند |
|---|---|
| A clocked run of every named step | The clip proves feed, forming and transfer, not the finishing box |
| The coil envelope you quoted for | The red coils set a scale, but no maximum appears anywhere |
| Line speed and cycle time per coil | No speed or cycle is visible in the footage |
| The shrink and strapping unit details | The silver box is never opened on camera |
| The palletising and stacking sequence | The line name promises it and the clip never shows it |
این را برای تأمین‌کننده ارسال کنید و آن را به همین صورت کپی کنید:
- Your cable diameter range and coil envelope.
- One uncut run from cable feed to palletised coil, with a clock.
- The throughput target per shift you need.
- The shrink and strapping unit specification.
- The palletising pattern and stack height you planned.
- The floor space, power and compressed-air requirement for the line.
- The safety device list per station.
سوالات متداول
Does the line actually strap, shrink and stack?
The footage shows the feed and forming side and the robot carrying coils toward the silver finishing box. The strapping, shrinking and stacking sequences themselves are not shown, so confirm each finished step in writing with a clocked run.
What sizes of cable can it process?
Not shown. The red coils in the footage are roughly dinner-plate size, and no readable label states a maximum, so send the supplier your cable range and coil envelope.
Is the whole line fully automatic?
Coils move by conveyor and robot in the footage, and the feed side runs unattended in the tour. How many operators the full line needs is not stated and is a fair question for the quotation.
خواندن مرتبط
- دستگاه بسته بندی کابل — خانواده تجهیزات بستهبندی کابل در پشت این خط.
- دستگاه کلاف اتوماتیک — the coiling station that makes the reel this line finishes.
- دستگاه تسمه اتوماتیک — the strapping step this line carries.
- دستگاه کوچک کننده — the shrink process inside the finishing box.
- خط بسته بندی اتوماتیک - سیستم‌های بستهبندی تمام اتوماتیک
- اینورتر پالت — pallet handling equipment for the stacking area.
مرحله بعدی
Send the supplier your cable range, coil envelope and throughput target first, and ask for one clocked run from cable feed to palletised coil. The line name promises five steps, and the quotation has to show each one running.
Then send the seven questions above, and ask for the finishing box details and the safety device list per station.
Then visit or request a reference line and watch a full palletising shift before signing. Use the صفحه تماس با برای شروع آن تبادل.
آخرین بررسی: 2026-09-28
منتشر شده: ۲۰-۰۴-۲۰۲۶
