Kokkuvõte
A pallet of molds or steel sheets often has to be tipped over to drain, clean or restack, and a fixed inverter ties up floor space in a busy yard. This mobile pallet inverter rides on wheels: the forks slide under the pallet, lift it by its base, and tilt it under the operator’s hand control to tip the load. The operator works the hand control beside the machine. Load range and tilt angle are confirmed per project.
Sisukord
- Miks mobiilne inverter
- Mida masin teeb
- Forks and support
- Lift and tilt
- Mida kaadrid näitavad
- Tüüpilised konfiguratsiooni
- Valiku kontroll-leht
- Töötamine ja ohutus
- Inseneri KKK
- Järgmine samm
- Seotud lugemine
- Allikad ja standardid
Miks mobiilne inverter
A fixed inverter needs its own bay, and moving the load to it costs time. A mobile unit drives to the load, so the pallet can be turned where it stands or in an open yard.
Because it travels, one mobile inverter can serve several work areas. Load range and travel conditions are confirmed per project.
Mida masin teeb
The machine is a mobile pallet inverter. It moves on wheels to the pallet, slides its forks under the load base, lifts the pallet and tilts it under the operator’s hand control so the load tips over for the next step.
The operator drives and tilts the unit from the hand control beside the machine. Pallet size, load weight and tilt angle are confirmed per project.
Forks and support
The unit carries forks that slide under the pallet and a support structure that holds the load base. Support members extend under the load so the pallet is carried rather than clamped.
Fork length and support spacing follow the pallet size so the load sits level. Fork dimensions are confirmed per project.
Lift and tilt
The operator raises the forks to clear the floor, then tilts the unit forward under hand control. The pallet leans past vertical so the load tips over in a controlled way.
Tilting under hand control lets the operator stop at the angle needed for the job. Tilt angle and speed are confirmed per project.
Mida kaadrid näitavad
Our footage shows the unit sliding its forks under a load base, lifting the pallet clear of the ground, and tilting the load under the operator’s hand control until it tips over. It is a general demonstration, so your pallet size, load weight and tilt angle are confirmed with us per project.
Tüüpilised konfiguratsiooni
Allolevad joonised loetlevad funktsionaalse disaini piirid, mitte numbrilised väärtused, ja need kinnitatakse iga projekti kohta eraldi.
| Parameeter | Tüüpiline vahemik, kinnitatud projekti kohta |
|---|---|
| Koormus | pallet of molds or sheets |
| ajam | wheels, self-powered |
| Forks | under-load support |
| Kallutage | operator hand control |
| Kasutama | yard and multi-station |
| Elektrivarustus | 380 V kolmefaasiline 50 Hz või 220 V ühefaasiline kergmasinate jaoks, valitud projekti järgi |
Valiku kontroll-leht
| Küsimus | Kinnitage projekti kohta |
|---|---|
| Kaubaaluse suurus | length, width, weight |
| Koormus | molds, sheets, container |
| Kallutage | nurk, kiirus |
| reisimine | floor type, yard access |
| ajam | electric or manual |
| Elektrivarustus | pinge, faas ja sagedus kohapeal |
Töötamine ja ohutus
Drive the unit to the pallet, slide the forks under the load base and lift clear of the ground, then tilt under hand control and stop at the angle needed for the job. Keep personnel clear of the tipping path of the load.
Routine checks cover the forks, the lift and the tilt drive, per the machine manual. Confirm the load is seated before any tilt.
Inseneri KKK
Q: What does this machine do? A: It lifts a pallet on its forks and tilts the load over under hand control.
Q: Why make it mobile? A: A mobile unit drives to the load, so one inverter serves several work areas.
Q: How is the load held? A: The forks slide under the load base and support members carry it.
Q: How is the load tipped? A: The operator tilts the unit under hand control until the load tips over.
Q: What does it suit? A: Pallets of molds, steel sheets and similar stable loads in a yard or line.
Järgmine samm
- Saatke meile oma kaubaaluse suurus ja koorma kaal e-posti aadressile info@fhopepack.com.
- We send a mobile inverter proposal and a floor drawing within 48 hours.
- We confirm the fork length and tilt angle against your pallets.
Seotud lugemine
- Mobiilne kaubaaluste inverter vormide ja terasplekkide jaoks
- vormide klapplaud FHOPE
- Teraspleki inverter ja treipink
- FHOPE pakkimismasinate tootesarjad
Allikad ja standardid
- ISO 12100:2010 Masinate ohutus, projekteerimise ja riskihindamise üldpõhimõtted
- EN 415-10:2014 Pakkemasinate ohutus, üldised nõuded
- EN ISO 13849-1:2023 Masinate ohutus, juhtimissüsteemide ohutusega seotud osad
FHOPE mobile pallet inverter demonstration video. Reviewed as a general demonstration; pallet size, load weight and tilt angle confirmed per project.
Viimati üle vaadatud: 26.08.2026
