> **Kokkuvõte**
> This clip shows our coil tilter with a rotary base in our workshop. The orange V-cradle tilts through 90 degrees to turn a coil from eye-horizontal to eye-vertical or back, and the black base slews the whole tilter through 180 degrees. That way the coil is loaded from one side and leaves facing the next conveyor or the crane, without a second handling move.
Sisukord
- Mida klipp näitab
- Miks lisada pöörlev alus
- Tsüklit mähise kohta
- Mida me iga taime kohta määrame
- Valiku kontroll-leht
- ohutus
- Inseneri KKK
- Järgmine samm
- Seotud lugemine
- Allikad
Mida klipp näitab
| Samm | Mida sa näed |
|---|---|
| Machine | An orange V-cradle tilter with an L-shaped table on a black rotary base |
| Tilting | The cradle tilts through 90 degrees, from V-cradle up to the flat table |
| Slewing | The base turns the whole tilter round through 180 degrees |
| Return | The cradle tilts back and the base returns to the load side |
| Workshop | Other FHOPE coil machines stand in the background |
Miks lisada pöörlev alus
- **One less move.** The coil is tilted and turned in one station, so no crane move is needed to face it the right way.
- **Flexible layout.** Load and discharge can be on opposite sides of the tilter.
- **Fits existing lines.** The base points the coil at an existing conveyor or stacker.
- **Safer handling.** Operators stay outside the cell while the coil turns.
Tsüklit mähise kohta
**Töötatud näide (illustreeriv).**
| Üksus | Väärtus |
|---|---|
| Tilt 90 degrees (illustrative) | 40 s |
| Slew 180 degrees (illustrative) | 30 s |
| Load, unload and return moves (illustrative) | 50 s |
| Cycle, 40 + 30 + 50 | 120 s |
| Coils per hour, 3,600 ÷ 120 | 30 coils |
Mida me iga taime kohta määrame
| Seadistus | Sõltub |
|---|---|
| Cradle size | Coil OD, ID and width |
| Capacity | Heaviest coil |
| Slew angle | 180 degrees, or set per layout |
| Drive | Hydraulic or electric, per plant |
Valiku kontroll-leht
- [ ] Coil weight, OD, ID and width.
- [ ] Tilt direction: eye-horizontal to eye-vertical or back.
- [ ] Slew angle needed.
- [ ] Load and discharge sides.
- [ ] Mähiseid tunnis.
- [ ] Pit or floor mounting.
ohutus
- Fence the cell; keep clear of the slewing base and the cradle.
- Lock out before entering the cell.
- Use PU or rubber pads where the coil surface must not be marked.
- CE-turgude jaoks on masin konstrueeritud vastavalt standarditele ISO 12100 ja EN 415-10.
Inseneri KKK
Q: What does the rotary base add?
A: It slews the tilter through 180 degrees, so the coil leaves facing the next station.
Q: How far does the cradle tilt?
A: Through 90 degrees, turning the coil from eye-horizontal to eye-vertical or back.
K: Mitu mähist tunnis?
A: About 30 coils per hour with an illustrative 120 s cycle that includes the return moves; real output depends on coil handling and layout.
Q: Can the slew angle be other than 180 degrees?
A: Yes, we set it to suit the layout.
Q: Is the drive hydraulic?
A: We supply hydraulic or electric drive, per plant.
K: Millised standardid kehtivad?
A: CE-turgude puhul ISO 12100 ja EN 415-10.
Järgmine samm
Me sobitame mähise kallutusmehhanismi pöörleva alusega kolmes etapis:
1. **Submit your layout drawing** with coil weights and sizes, tilt direction and layout, to **info@fhopepack.com**.
2. **Saage 48 tunni jooksul pakkumine** koos masina andmete ja paigutusega.
3. **Book a site survey** so we confirm the floor and crane layout.
Seotud lugemine
- [90-Degree Coil Upender with Rotary Base](https://www.fhopepack.com/videos/the-90-degree-coil-upender-with-rotary-base/)
- [Hydraulic Coil Tilter for 90° Turning](https://www.fhopepack.com/videos/hydraulic-coil-tilter-the-smart-fix-for-costly-coil-handling/)
- [Coil Upender with Transfer Trolley](https://www.fhopepack.com/videos/steel-coil-upender-for-coil-unloading-with-transfer-trolley/)
- [Coil upender and tilter range](https://www.fhopepack.com/Mechanical/Coil-Upender-Tilter.html)
Allikad
- Masina sisu: FHOPE insenerimeeskond, 10.10.2026
- Clip: [the video on YouTube](https://www.youtube.com/watch?v=j0X0U6bwrVs)
- Cycle per coil: our worked example, illustrative values
- Standardite ulatus: ISO 12100:2010; [EN 415-10:2014](https://www.nen.nl/en/nen-en-415-10-2014-en-191845)
- Pakkumise ajastus: heakskiidetud koja CTA (pakkumine 48 tunni jooksul)
Viimati üle vaadatud: 2026-10-10
