Resumen ejecutivo
A large paper roll is heavy and must change from a tilted or standing position to the angle a machine or truck needs, and forcing it by hand risks damage. This hydraulic upender and titler carries the roll on a platform, tilts it from an angled position toward horizontal and back under remote control, and stops at the angle the next step requires. The operator works the remote beside the machine. Roll size, weight and tilt angle are confirmed per project.
Índice
- Why a paper roll titler
- Qué hace la máquina
- Platform and hydraulic drive
- Tilt and stop
- Lo que muestran las imágenes
- Configuración típica
- Lista de verificación de selección
- Operación y seguridad
- Preguntas frecuentes sobre ingeniería
- El próximo paso
- Lectura relacionada
- Fuentes y estándares
Why a paper roll titler
A paper roll changes angle as it moves from the winder to the wrapper to the truck, and a roll that is only nearly level still rolls or tips. A powered platform tips the roll to the exact angle each stage needs.
Controlling the tilt under power protects the paper edge and the operators. Roll range is confirmed per project.
Qué hace la máquina
The machine is a hydraulic upender and titler for paper rolls. The roll sits on a wide platform, hydraulic cylinders raise one side, and the platform tips the roll between an angled and a level position under remote control, stopping at the set angle.
The operator works the remote beside the machine. Roll size, weight and tilt angle are confirmed per project.
Platform and hydraulic drive
The roll rests on a platform with a holding edge, and blue hydraulic cylinders under the platform drive the tilt. The cylinders extend to tip the platform and retract to lower it back.
Hydraulic drive carries the roll weight smoothly through the travel. Platform width and roll weight are confirmed per project.
Tilt and stop
The operator tips the platform under remote control and stops it at the angle needed for the next stage. The roll stays on the platform while the angle is held.
Stopping at the set angle steadies the roll for take-away. Tilt angle range and holding are confirmed per project.
Lo que muestran las imágenes
Our footage shows a wrapped roll on the platform, the hydraulic cylinders tipping it from an angled position toward level, and the platform moving back under the operator’s remote control. It is a general demonstration, so your roll size, weight and tilt angle are confirmed with us per project.
Configuración típica
Las cifras que aparecen a continuación muestran los límites de diseño funcional en lugar de valores numéricos, y se confirman para cada proyecto.
| Parámetro | Rango típico, confirmado por proyecto |
|---|---|
| Carga | Rollo de papel |
| Accionamiento | Cilindros hidraulicos |
| Inclinación | platform, remote control |
| monte | base del piso |
| Control | pendant remote |
| Suministro eléctrico | 380 V trifásica 50 Hz, o 220 V monofásica para maquinaria ligera, según se requiera para cada proyecto. |
Lista de verificación de selección
| Pregunta | Confirmar por proyecto |
|---|---|
| Rango de rollos | diámetro, ancho, peso |
| Inclinación | angle range, speed |
| Plataforma | size, hold edge |
| Accionamiento | carrera del cilindro |
| Control | tipo remoto |
| Suministro eléctrico | voltaje, fase y frecuencia en el sitio |
Operación y seguridad
Place the roll on the platform and use the remote to tip it to the set angle; the hydraulic cylinders hold the platform while the roll is taken away. Keep clear of the platform travel and the roll while it moves.
Routine checks cover the hydraulic system, the platform and the controls, per the machine manual. Confirm the roll is seated before tilting.
Preguntas frecuentes sobre ingeniería
Q: What does this machine do? A: It tips a paper roll between an angled and a level position under remote control.
Q: Why tilt the roll under power? A: A roll is heavy to angle by hand and tips dangerously when not level.
Q: How is the roll carried? A: The roll rests on a wide platform with a holding edge.
Q: What moves the platform? A: Hydraulic cylinders raise one side of the platform to the set angle.
Q: What does it suit? A: Paper rolls and similar cylindrical loads that change angle between stages.
El próximo paso
- Email us at info@fhopepack.com with your roll size and weight.
- We send an upender and titler proposal and a layout drawing within 48 hours.
- We confirm the tilt angle and platform size against your rolls.
Lectura relacionada
- Paper roll upender and titler
- Inversor y torneador de chapa de acero
- Inversor móvil de palets para moldes y chapas de acero
- Líneas de productos de maquinaria de embalaje FHOPE
Fuentes y estándares
- ISO 12100:2010 Seguridad de las máquinas, principios generales para el diseño y la evaluación de riesgos.
- EN 415-10:2014 Seguridad de las máquinas de envasado, requisitos generales
- EN ISO 13849-1:2023 Seguridad de las máquinas, partes de los sistemas de control relacionadas con la seguridad.
FHOPE paper roll upender and titler demonstration video. Reviewed as a general demonstration; roll size, weight and tilt angle confirmed per project.
Última revisión: 11/10/2026
