Shrnutí
A hose coil wrapping and strapping machine winds a long flexible hose into a round coil and holds the finished coil with strapping. The operator positions the hose and starts the cycle from the panel, the shaft turns, and a guide arm winds the hose around it into a coil. The coil is completed on the machine and the operator takes it out for storage or transport. Hose length, coil size and cycle speed are confirmed per project.
Obsah
- Why hose wrapping and strapping
- Co stroj dělá
- Rotating shaft and guide arm
- Cyklus a ovládání
- Co ukazuje záběry
- Typická konfigurace
- Kontrolní seznam pro výběr
- Provoz a bezpečnost
- Často kladené otázky k inženýrství
- Další krok
- Související čtení
- Zdroje a standardy
Why hose wrapping and strapping
Long loose hose can tangle, collect dirt and take up too much space while it is moved or stored. Winding the hose into a round coil on a machine keeps it neat and compact, and a strap around the outside holds the coil together.
The machine performs the coiling and the strapping in one place, so handling between steps is reduced. Hose length and coil size are confirmed per project.
Co stroj dělá
The machine is a hose coil wrapping and strapping machine with a central rotating shaft, a guide arm and a control panel on one side. The operator positions the hose, starts the cycle from the panel, and the guide arm feeds the hose onto the turning shaft so it builds up as a spiral coil.
The strap is applied to hold the finished coil, and the operator removes it when the cycle stops. Coil size and wrap speed are confirmed per project.
Rotating shaft and guide arm
The central shaft turns the hose as it is fed, and the guide arm lays each turn in place so the coil stays even. The control panel on the side carries buttons and indicator lights used to start and stop the cycle.
The yellow body houses the shaft and the arm, and the hose enters from one side and leaves as a coiled bundle. Coil size and strapping tension are confirmed per project.
Cyklus a ovládání
The operator loads the hose and starts the cycle from the panel. The shaft turns, the guide arm winds the hose into a coil, and the machine stops with the coil formed and strapped.
The operator removes the finished coil and the machine is ready for the next hose. Stop points and cycle speed are confirmed per project.
Co ukazuje záběry
Our footage opens with the machine standing still as an idle or standby start: the green hose coil is in place on the machine and no parts are moving. The operator then starts the cycle, the shaft turns, and the guide arm winds the hose into a coiled bundle. The footage is a general demonstration, so your hose length, coil size and cycle speed are confirmed per project.
Typická konfigurace
Níže uvedené obrázky uvádějí spíše funkční hranice návrhu než číselné hodnoty a jsou ověřovány pro každý projekt zvlášť.
| Parametr | Typický rozsah, potvrzený pro každý projekt |
|---|---|
| Zatížení | long flexible hose fed from one side |
| obal | central shaft with guide arm, spiral coil |
| urostlý | strap applied to the finished coil |
| ovládání | buttons and lights on the panel |
| Namontujte | floor, free-standing type |
| Elektrické napájení | 380 V třífázové 50 Hz nebo 220 V jednofázové pro lehké stroje, volí se individuálně pro každý projekt |
Kontrolní seznam pro výběr
| Otázka | Potvrzení pro každý projekt |
|---|---|
| Hadice | length, diameter, wall stiffness |
| Cívka | outer size, coil weight |
| urostlý | strap width, tension, material |
| Cyklus | čas obalu, body zastavení |
| Site | podlahová plocha, přístup |
| Elektrické napájení | napětí, fáze a frekvence na místě |
Provoz a bezpečnost
Place the hose in position, start the cycle from the panel, and stand clear while the shaft turns and the guide arm works. Keep hands away from the rotating shaft and the guide arm while the machine runs.
Routine checks cover the shaft, the guide arm and the control panel, per the machine manual. Confirm the hose is seated before each cycle.
Často kladené otázky k inženýrství
Q: What does this machine do? A: It winds a long hose into a round coil by turning a central shaft while a guide arm lays the hose in a spiral, then holds the coil with strapping.
Q: How does the hose become a coil? A: The guide arm feeds the hose onto the turning shaft, and the coil builds up by spiralling layer by layer until the cycle stops.
Q: Why strap after wrapping? A: The strap holds the finished coil together when it is moved or stored, and it stops the outer turns from springing open.
Q: What hose sizes suit the machine? A: Hose length and diameter drive the coil size, and the suitable range is confirmed per project when you send us your hose details.
Q: What does it suit? A: Long flexible hose that needs a tidy, compact coil, kept together by the strap when it is stored or moved.
Další krok
- Email us at info@fhopepack.com with your hose length and coil size.
- We send a hose coil wrapping and strapping machine proposal within 48 hours.
- We confirm the coil size and strapping for your hose.
Související čtení
- Ovíjení a páskování hadicových cívek: Řešení pro průmysl
- Automatic hose coil winding and packing machine
- Stroj na ovíjení cívek hadic a trubek
- Hose packaging machine product page
Zdroje a standardy
- ISO 12100:2010 Bezpečnost strojních zařízení, obecné zásady pro konstrukci a posuzování rizik
- EN 415-10:2014 Bezpečnost balicích strojů, všeobecné požadavky
- EN ISO 13849-1:2023 Bezpečnost strojních zařízení, bezpečnostní části řídicích systémů
FHOPE hose coil wrapping and strapping machine demonstration video. Reviewed as a general demonstration; hose length, coil size and cycle speed confirmed per project.
Naposledy zkontrolováno: 11. 10. 2026
