ملخص تنفيذي
A turnstile integrated slit coil strapping machine rotates and holds a slit coil so the strap can be applied around the strip. In the footage a large dark coil of metal strip turns inside a yellow industrial machine frame. This page covers what the demo clip supports, the sizing data to send, and what this clip does not demonstrate.
جدول المحتويات
- ما يفعله هذا الجهاز
- Frame and turnstile
- Strap and cycle
- ما تدعمه لقطات العرض التوضيحي
- الحجم والتكوين
- التشغيل والسلامة
- أسئلة وأجوبة هندسية
- الخطوة التالية: قائمة التحقق من طلب عرض الأسعار
- القراءة ذات الصلة
- المصادر والمعايير
ما يفعله هذا الجهاز
A slit coil leaves the slitting line as a loose strip roll that needs a strap before it can travel or sit in storage. This machine class rotates and holds the coil so the strap is fed around the strip and tightened without the operator lifting the load.
Use this page to decide whether a turnstile integrated strapper fits your slit coil flow, and to see which data FHOPE asks for to size one.
Frame and turnstile
The machine has a yellow industrial machine frame that rotates and holds the coil. The roll surface carries black stripe markings, and the machine stands on a green metal factory floor with other machinery visible in the background.
Coil weight and turnstile indexing are set in the sizing step.
Strap and cycle
The cycle starts with the coil in the turnstile: the machine rotates the coil into the strap position, the strap is fed around the strip and tightened, and the finished coil is released.
The strap runs around the strip, not through the eye. Strap count and tension are confirmed with your coil in the sizing step.
ما تدعمه لقطات العرض التوضيحي
The clip shows a large, dark-colored coil of metal strip, possibly steel, rotated and held by the yellow machine frame.
It is a general demonstration. It does not show rated coil weight, max coil OD and width, cycle time, or strap specification, and it does not demonstrate a separate wrapping or stacking stage. Those points are confirmed in the enquiry, not assumed.
الحجم والتكوين
This machine is sized from your coil range and site, not from a fixed rating plate. Confirm the following with FHOPE in the enquiry:
| بيانات للتأكيد | ما الذي يحدده |
|---|---|
| Coil weight, OD and width range (kg, mm) | Frame, turnstile and strapper head sizing |
| Strap width, thickness and tension grade | Consumable stock and seal settings |
| عدد اللفات لكل وردية | Line sizing and cycle time |
| How the coil enters and leaves the turnstile | Loading equipment and layout |
| Electrical supply (voltage, phase, frequency) | Drive and control build. House-typical 380 V three-phase 50 Hz, 220 V single-phase option, confirmed on site |
يتم التحقق من كل صف وفقًا لشروط موقعك قبل عملية البناء.
التشغيل والسلامة
Place the coil in the turnstile, start the cycle, and let the machine rotate and strap it automatically. Take the finished coil from the outfeed when the strap is sealed.
Keep clear of the rotating turnstile and the strap feed while the machine runs, and check the turnstile drive and the strap feed per the machine manual. Stop the machine and isolate the power supply before clearing a jam or reaching near the turnstile, and apply lock-out per the site procedure before any service work.
أسئلة وأجوبة هندسية
Q: What does this turnstile slit coil strapping machine do? A: It rotates and holds a slit coil so the strap is fed around the strip and tightened without manual lifting.
Q: How is the coil held during the cycle? A: The yellow industrial machine frame rotates and holds the coil through the strap cycle.
Q: Where does the strap run? A: The strap runs around the strip, not through the eye; count and tension are confirmed in the sizing step.
Q: Can wrapping or stacking be added? A: Yes, both are options to confirm with the builder; the demonstrated cycle covers strapping only.
Q: What electric supply does it need? A: The house-typical build is 380 V three-phase 50 Hz; light machines can be arranged at 220 V single phase. Confirm the site supply in the enquiry.
الخطوة التالية: قائمة التحقق من طلب عرض الأسعار
- Email info@fhopepack.com with your coil weight, OD and width range.
- State whether wrapping or a separate stacking stage is required.
- Submit your layout drawing of the coil infeed and outfeed area.
- Receive a proposal with strap grade, coverage and cycle time within 48 hours, and book a site survey if you want the turnstile layout checked before the build.
القراءة ذات الصلة
- Automated Slit Coil Packing Line for Service Center Productivity
- Automatic Copper Strip Coil Packing Line with Labeling, Wrapping, Stacking
- Hose Wrapping Machine: HDPE Pipe Coil Packing Machines
- خطوط إنتاج آلات التعبئة والتغليف من FHOPE
المصادر والمعايير
- ISO 12100:2010 سلامة الآلات، المبادئ العامة للتصميم وتقييم المخاطر
- EN 415-10:2014 سلامة آلات التعبئة والتغليف، المتطلبات العامة
The standards that apply depend on the destination market. For CE markets, ISO 12100 sets the machinery risk-assessment method and EN 415-10 covers packaging machine safety.
Demonstration footage (video QkyRy7gAFsA) reviewed as a general machine demo; rated outputs are not shown in the clip and are therefore not quoted. Last reviewed: 2026-10-18.
