Jednoduchý obal na cievky

Zhrnutie

A simple coil wrapper is a one-station machine for plants that wrap cable, wire or hose coils by the hundred, not by the thousand. The operator loads the coil, presses start and takes it off wrapped. What decides the result is the setup: roller spacing, film tension and overlap. This article covers how our simple coil wrapper is set and run.

The wrapper has a white body with a blue arm and clamp. A coil sits on the rollers already closed in clear film, and a driven roller above it turns the coil while the film ring passes through the eye.

Obsah

Hlavné časti

  • Podporné valčeky: carry the coil and turn it.
  • Top press roller: holds the coil down so it turns without slipping.
  • Ovíjací krúžok: carries the film roll through the coil eye.
  • Filmový vozík: holds the roll and sets the film tension.
  • Ovládací panel: start, stop, ring speed and coil speed.

Setting up for a new coil size

  1. Set the support rollers to the coil OD so the eye sits over the ring opening.
  2. Lower the top press roller onto the coil face.
  3. Fit a film roll of the right width and thread it through the carriage.
  4. Set the film tension so the film lies flat without tearing.
  5. Set ring speed and coil speed for the overlap you want.
  6. Wrap one test coil and check the overlap at the inner and outer edge.

Running a coil

  1. Place the coil on the rollers.
  2. Fix the film end to the coil.
  3. Press start; the ring and rollers run together.
  4. After one full coil turn the machine stops.
  5. Cut the film, press the tail down and lift the coil off.

Údaje o strojoch

Položka FPCA100 FPCA-200
ID Coil 90 – 250 mm 150 – 400 mm
Coil OD 150 – 400 mm 250 – 500 mm
Šírka cievky 50 – 180 mm 80 – 200 mm
Hmotnosť cievky 2-30 kg 2-50 kg
Rýchlosť zvonenia 10–120 ot./min 10–120 ot./min
Čas obalenia 18 – 30 s 20 – 30 s
prekrytie 20-90% 20-80%
Výkon 1.8 kW 2.0 kW

Overlap and speed settings

The overlap is set by the ratio of ring speed to coil speed. The film advances round the outer edge by:

Advance per wrap ≈ film width × (1 − overlap)

Coil turns needed ≈ π × OD ÷ advance

Example only: 60 mm film at 50% overlap advances 30 mm per wrap. A 300 mm OD coil has an outer edge of π × 300 ≈ 942 mm, so 942 ÷ 30 ≈ 31 wraps, or about 16 s at 120 r/min. The inner edge is shorter, so the film there overlaps more; check the overlap at the outer edge, where it is lowest.

The formula gives net wrapping time only. The full cycle adds loading, fixing the film end, the soft start and stop, cutting and unloading, so time a real coil at your site before setting the shift output.

Denné kontroly

  1. Rollers clean and free of film scraps.
  2. Film carriage tension even.
  3. Ring guard and emergency stop working.
  4. Air and power supply normal.
  5. Test coil overlap checked at shift start.
  6. Film stock for the shift.

Kontrolný zoznam výberu

  1. Vnútorný priemer, vonkajší priemer a šírka cievky.
  2. Hmotnosť cievky.
  3. Cievky za smenu.
  4. Šírka a typ filmu.
  5. Manual loading or conveyor.
  6. Label on the wrap.

bezpečnosť

We design to EN ISO 12100:2010 for risk assessment, EN 415-10 for packaging machine safety and EN 60204-1 for the electrical equipment. Keep hands clear of the ring while it runs, and load only with the machine stopped.

Často kladené otázky týkajúce sa inžinierstva

Q: Why is the overlap higher on the inside of the coil? A: The inner edge is shorter, so the same film covers it more times.

Q: How long does one coil take? A: 18–30 s on the FPCA100.

Q: Can it wrap with paper? A: Film is standard; other materials are confirmed at quote.

Q: Can it be upgraded later? A: Yes, conveyors or a coiler can be added in front, confirmed at quote.

Ďalši krok

  1. Send your coil ID, OD, width and weight na adresu info@fhopepack.com.
  2. Zhodujeme sa the wrapper model and film.
  3. Odpovedáme do 24 hodín s návrhom a cenovou ponukou.

Zdroje

  • FHOPE product pages: FPCA100, FPCA-200 cable coil wrapping machines
  • EN ISO 12100:2010; EN 415-10; EN 60204-1

Naposledy skontrolované: 20. 10. 2026

Súvisiace príspevky

Rezervujte si hovor
Rezervujte si hovor