автоматическая машина для намотки труб и намотки шлангов

Резюме This video shows a blue automatic coiling machine winding a bright yellow flexible hose into a tight, uniform spiral coil on a large rotating reel — with no operator touching the product. Feed, clamping, spiral winding, and end-of-cycle holding all happen by machine. The footage covers roughly 92 seconds of continuous operation, but shows no control panel, no rated specifications, and no certification marks — those must be confirmed with the manufacturer.

Почему эта машина важна

Anyone who has coiled long, heavy flexible hose by hand knows the problems: uneven loops, twisted product, tired workers, and coils that loosen the moment they leave the bench. An automatic pipe coiler and hose coiling machine replaces that manual work with a controlled, repeatable winding cycle. The result is a coil where every layer sits evenly on the last one, which protects the hose from kinking and deformation and makes downstream packaging far easier.

This article is written for plant managers and procurement teams evaluating a coiling machine, and for engineers who want to see exactly how the process runs before committing to a layout. Everything below about what the machine приносит comes directly from the footage above. Everything about specs, options, and safety configuration is either a general engineering note or flagged as something to уточнить у производителя.

Что показано на видео

The footage runs about 92 seconds and shows one complete winding sequence on a blue painted steel machine. The timeline below follows the product, not the clock alone, because that is how a buyer would actually evaluate the cycle.

Three things stand out from that sequence:

• No human hands touch the hose. Feed, positioning, winding, and end-holding are all mechanical.
• The winding is a compound motion. The winding arm combines circular and axial travel, which is what produces an evenly spaced helix rather than a loose jumble of loops.
• The reel speed changes with fill level. The machine slows as the reel nears full, which suggests controlled deceleration rather than a simple on/off spin.

наблюдаемая структура машины

For buyers and maintenance planners, the visible hardware is worth cataloguing. Based on what the camera actually captures:

The hose itself is uniformly bright yellow, smooth-surfaced, and clearly flexible — consistent with a rubber or PVC-type industrial hose. In the early frames it reads as roughly 20–30 mm in outer diameter relative to the guide rails; later in the footage, judged against the full reel, the layers suggest a larger apparent diameter. Absolute dimensions cannot be measured from video, so treat all size figures as indicative only. The finished product is a compact cylindrical coil with its axis vertical, ends held in place, ready for the next step in the line.

Заметки о непосредственных наблюдениях

What follows is kept deliberately close to the raw analysis, with only light grammatical smoothing, so the factual record stays intact:

• At the start, the hose enters horizontally from the right feed side and is clamped at the central guide; the left reel is static.
• The left reel then rotates at high speed, winding the hose spirally onto its hub in closely stacked layers.
• Mid-cycle, the left reel carries an estimated 3–4 complete coils; the right reel also rotates, apparently for tension balance or winding an additional segment.
• Near the end, the left reel slows as it nears full; the hose end is guided by a directing device toward the reel center.
• In the final phase the winding arm stops oscillating, the reel is nearly full, and the feed end is static — an idle or inter-cycle state.
• No control panel, screen, button array, or indicator lights are visible in any frame; only a small grey box with a yellow warning triangle on the right-hand enclosure.
• No readable text, nameplate, model number, serial number, or watermark appears anywhere in the footage; the only legible markings are graphical warning symbols.
• The environment is a typical industrial plant: high windows, concrete floor, another blue machine and dark barrels in the background, and a yellow floor line marking the work area boundary.

Чего не показано в видео

This is just as important for a buyer as what is shown. The following are не наблюдается in the footage and must be confirmed with the manufacturer before purchase:

• Номинальная мощность (кВт), напряжение питания и частота.
• Maximum and minimum hose diameter range, and reel adaptability for different sizes
• Maximum winding length (m) or coil weight capacity
• Exact cycle time and production rate — the 92-second clip does not represent certified throughput
• Machine model designation and documentation (manuals, electrical drawings, PLC logic)
• Safety certifications such as CE marking or compliance with ISO 13849 / EN ISO 13857
• Whether an emergency stop, light curtain, or safety interlock is fitted — none is clearly visible
• Hose material compatibility (PVC, EPDM, PU, TPE, etc.)

Safety and operation notes for buyers

The footage gives a mixed safety picture, and honest evaluation requires saying so. Warning labels are present on the frame. However, no physical guarding around the reel is visible in these frames, no red emergency-stop button can be identified, and no light curtain or door interlock is apparent. The machine runs with nobody in the frame, which is how an automatic cell should run — but a human will eventually load, unload, or clear the machine.

A fast-rotating reel with a winding arm poses pinch and entanglement risk. Before accepting delivery, it is reasonable to require, in writing:

1. A documented risk assessment per local regulation and, where applicable, EN ISO 13857 reaching-distance requirements.
2. Confirmation of e-stop placement, and whether light curtains or interlocked gates are included or optional.
3. Clarification on what the grey box with the warning triangle actually is — it may be an e-stop or sensor module, but the video cannot confirm this.

If the supplier’s standard configuration differs from what your safety engineer requires, budget for guarding retrofit at purchase time rather than after commissioning.

Где находится этот тип машины?

Automatic coiling of flexible hose suits operations that produce or distribute coiled hose products in volume. Typical settings, inferred from the product shown, include hydraulic and pneumatic hose assembly supply, industrial hose distribution and warehousing, and cable or cordage operations that need consistent coils for packaging. The qualitative benefits visible or reasonably derived from the footage:

• Consistent coil geometry — the helix stacking is uniform, which manual winding rarely achieves over a full shift.
• Reduced operator strain — no pulling and coiling of long, springy hose by hand.
• Непрерывная интеграция — the machine takes product from a feed direction and holds a finished coil, so it can slot into a wrapping or packaging line downstream.
• Бережное обращение — controlled winding reduces stretch and deformation risk compared with hand coiling.

Likely limits to probe: the machine shown winds one product type and apparent size range; changing hose diameter or stiffness may require reel or guide changes. Confirm changeover time and tooling cost with the manufacturer.

Вопросы, которые следует задать перед покупкой

Use this checklist when you contact a supplier about a machine like this:

• What hose diameter, stiffness, and length range does the standard model accept?
• What is the actual cycle time for my product, and at what coil diameter?
• How are hose diameter changeovers done, and what parts are needed?
• What safety package is standard — e-stop, guarding, light curtain, interlocks?
• Is there a control interface (the video shows none), and what parameters are adjustable (winding pitch, layer count, tension)?
• What are the maintenance intervals and key wear parts (bearings, guides, drive components)?
• Are certifications (CE, etc.) available with documentation?
• Can it connect to a downstream wrapping or packaging machine?

FAQ

Does the machine need an operator during the winding cycle? In the footage, no person appears at any point during the ~92-second sequence; feed, winding, and end-holding are automatic. Loading, unloading, and supervision arrangements should be confirmed with the manufacturer.

What size hose can it coil? The hose shown is a bright yellow flexible industrial hose; absolute diameter cannot be measured reliably from video. The compatible size range is not shown — check with the manufacturer.

How fast does it produce a finished coil? The visible winding sequence spans most of the clip, but this single demo run is not a rated cycle time or a guaranteed production rate. Request measured cycle data for your specific product.

Есть ли панель управления? No control panel, screen, or button array is visible in any frame; it may be located on the back or inside an enclosure. Confirm what interface is provided and which parameters (pitch, layers, speed) are adjustable.

Is the machine safe as shown? Warning labels are visible, but no guarding, e-stop, light curtain, or interlock can be confirmed from the footage. Ask the manufacturer for the full safety configuration and certification documents.

Связанное чтение

• Обзор автоматической намоточной машины
• Решения для упаковочных машин для шлангов
• Автоматическая линия упаковки рулонов
• Линия упаковки медных рулонов
• Машина для обмотки рулонов стали

Следующий шаг

If a hose or pipe product like the one in this video is part of your line, the fastest way to a concrete answer is to send us your coil dimensions, hose type, and target output. We will confirm machine suitability, cycle expectations, and the safety configuration included with your order. Reach the team through our контактная страница Запросить ценовое предложение или демонстрацию в режиме реального времени.

Source and method: this article is based on the video above only, analyzed frame-by-frame with a vision model on sampled frames. The video contains background music only — no narration or speech — so no audio transcription was used. All observed facts come from the footage; inferred benefits and unverified items are labeled as such.