Резюме
This factory footage follows a pre-formed hose/tube coil through a fully automatic line: a robot arm lifts the coil, a wrapping station applies transparent film, the wrapped coil is lowered into a carton, and an automatic case sealer closes the box. The clip runs about two and a half minutes and shows the same wrap→carton→seal cycle repeating. Честная граница: the coils enter as pre-formed spools — the footage does не show pipe/hose being coiled from a straight length, nor the length-measuring and cutting your product description mentions. Confirm the actual coiling and measurement steps with the supplier.
Everything below is based on what is actually visible in this video. Timestamps are approximate (frames sampled every four seconds from the ~2 min 30 s clip).
Что показано на видео
| Фаза | Прибл. время | Что происходит |
|---|---|---|
| Подающий | 0–8 с | A dark hose/tube coil sits on a rotating platform with a metal hold-down plate above it; a mechanical arm prepares to lift the coil. |
| Оберните | 8–20 с | The arm moves the coil to the wrapping station; the arm and rollers apply transparent film around the coil. |
| Трансфер | 20–32 с | The wrapped coil is returned and moved by conveyor; the arm then grabs the wrapped coil. |
| коробка | 32–48 с | The arm lifts the coil over an open carton and lowers it in; the filled box is moved along. |
| Печать | 48–56 s+ | A worker stands by the conveyor; the packed carton reaches an automatic case sealer and is sealed. Later frames repeat the same cycle with the next coil. |
The line runs the sequence automatically. A worker is visible standing beside the conveyor supervising; the footage does not show manual handling of the coil inside the line.
Заметки о непосредственных наблюдениях
Данные структурные наблюдения получены непосредственно из видеокадров. Все, что не удалось прочитать на видеозаписи, отмечено соответствующим образом.
- Конструкция: silver-gray metal frames (looks like stainless steel or aluminum) with some white/gray plastic or coated parts.
- Вращающаяся платформа: the coil is placed on it, with a metal hold-down plate above.
- Рука робота: lifts and moves the coil between stations.
- Упаковочный блок: rollers and a film supply wrap the coil in transparent stretch film.
- Панель управления: black-framed touchscreen with a Chinese menu (length setting, wire/line diameter, length set-point parameters visible). Buttons on the panel are labeled in Chinese (length setting / start / input).
- Конвейеры: rollers and belt conveyors connect the stations; a label applicator with a label roll is visible on the line.
- Case sealer: an automatic machine closes the packed cartons on the conveyor.
- Продукт: a dark, flexible hose or tube wound into a large, dense circular coil, wrapped in clear plastic film; packed into brown corrugated cardboard cartons.
- Вывески: a yellow triangular warning sign with a lightning symbol (high voltage / electric shock) is on the red control cabinet. A brand mark on the control panel is noted as a concern and is not named here.
Разборка конструкции машины
| Компонент | На видео видно | Что она делает |
|---|---|---|
| Rotating platform + hold-down plate | Coil sits on it at the start | Holds the coil in position prior to handling |
| Рука робота | Lifts and transfers the coil | Moves the coil from station to station |
| Упаковочный блок | Rollers + film supply | Applies transparent film around the coil |
| Панель управления | Touchscreen, Chinese UI | Sets and monitors the line |
| Конвейеры | Roller and belt lines | Connect infeed, wrap, carton, and seal stations |
| Аппликатор этикеток | Label roll on the line | Applies labels to cartons |
| Герметик корпуса | Automatic unit at the end | Closes and seals the packed cartons |
The layout is linear: coil handling → wrapping → transfer → cartoning → case sealing.
Чего не показано в видео
The clip demonstrates wrapping, cartoning, and sealing of pre-formed coils. It does not show:
- The coil being formed/coiled on-site from a straight length of pipe or hose (the coils arrive as finished spools).
- The length-measuring and automatic cutting steps described in the product overview.
- Rated output (coils or cartons per hour).
- Coil dimensions — outer diameter, inner diameter, width — and weight range.
- Тип пленки, ширина и количество слоев обертывания.
- Model number, power draw, and voltage.
- Case size handling, cycle time, and integration with your existing line.
- Emergency stops, fenced guarding, or light curtains (the visible marker is the high-voltage warning sign).
Все эти данные должны быть взяты из технической документации производителя.
Примечания оператора
The line is heavily automated. The only person visible stands beside the conveyor, watching the run — no manual product handling appears in the footage. Operating work is limited to supervision and the touchscreen panel (set parameters such as length and line diameter).
Почему это важно
For high-volume makers of hose, tube, or cable, this type of line removes the manual steps between wrapping and shipping:
- Сквозная автоматизация: wrap → carton → seal on one line.
- Последовательный вывод: each coil receives the same film wrap and each carton is sealed the same way.
- Less manual handling: the arm moves the product; the person supervises.
- Ready-to-ship cartons: sealed boxes can move straight to palletizing and dispatch.
The footage does not show the coiling input stage, so “from spool to sealed carton” is what this clip demonstrates rather than “straight pipe to carton”.
Для каких областей применения подходит данный тип линии?
Based on what the video shows (dark flexible hose/tube coils being wrapped and boxed), this style of line is typically relevant to:
- Hose and tube producers — flexible hose wound into coils, then packed.
- Кабелепроходческие заводы — coiled cable that must be film-wrapped and boxed.
- Distribution of coiled products — consistent, sealed cartons for shipping.
Эти выводы основаны на анализе видеоматериала, а не на утверждениях, содержащихся в самом видео.
Что нужно уточнить у производителя?
- Вход катушки — does the line accept your pre-formed coils, or can it coil from a straight length (not shown in this clip)?
- Габаритные размеры: — coil outer/inner diameter, width, and weight limits.
- Увеличить пропускную способность — coils per hour and cartons per hour.
- настройка съёмки — film type, width, and wrap layers.
- Обработка картонных коробок — box sizes accepted and case-sealer compatibility.
- Управление и интеграция — parameter setting, diagnostics, and hookup to existing conveyors.
Вопросы покупателей
Does the line form the coil, or only wrap and pack pre-formed coils? In this video the coils are already formed. If you need coiling from a straight length plus length measuring and cutting, confirm that capability explicitly.
What coil dimensions and weights does it handle? Confirm outer/inner diameter and width range against your product.
How fast is the full wrap-carton-seal cycle? Ask for throughput at your coil size and carton size.
What film is used and how many layers? Confirm stretch-film type, width, and the number of wraps per coil.
Does it integrate with my existing sealing or palletizing line? The clip ends at case sealing; confirm downstream integration.
What safety and guarding are fitted? The visible item is a high-voltage warning sign; confirm emergency stops, guards, and certifications.
Связанное чтение
- Станок для намотки и обвязки труб | Станок для намотки и обвязки шлангов
- Обмотка и обвязка шлангов: принцип работы и области применения.
- Как выполнить намотку и обвязку шлангов большого диаметра онлайн: полностью автоматическая намотка и обвязка.
- High Speed Hose Coiling Machine
- Автоматизированная машина для намотки и обмотки кабеля в режиме онлайн
- Automatic Pipe Coiling and Strapping Machines: Trends and Developments
Источник и метод
Данная статья основана на встроенном демонстрационном видеоролике (идентификатор YouTube). irq3haBQrXU, about 2 min 30 s). Frames were sampled at four-second intervals and analyzed with a local vision model (Qwen3-VL), with a focused re-check of the later frames confirming the cycle repeats and that the coils are pre-formed rather than wound on-site. The video contains background music only; there is no narration, so all observations are visual and timestamps are approximate. The derivative sections (applications, operator notes, evaluation, fit and buyer guidance) are clearly marked as analysis and are intended as a starting point for a conversation with a qualified supplier.
Следующий шаг
Пришли свое, свой coil dimensions, product type (hose/tube/cable), and target throughput to the FHOPE sales team — and ask explicitly whether on-site coiling and length measuring/cutting are available, since this video shows pre-formed coils only. Use the контактная страница начать разговор.
Последнее обновление: 2026-08-31.
