Sintesi Not every warehouse has room for a fixed pallet changing cell, but loads still arrive on pallets that must be swapped. Our mobile pallet changer holds a tall carton load, lifts it off its pallet so the old pallet can be pulled out by hand, and takes a new pallet pushed in on a hand pallet truck. The fit follows from the altezza di carico e altezza di sollevamentoEntrambi i valori vengono impostati per ciascun progetto.
Sommario
- Cosa mostra il video
- Come funziona il cambio pallet mobile
- Altezza di sollevamento e spazio libero sopraelevato per carichi alti
- Progettazione per una piccola superficie
- Controlli e sicurezza
- Lista di controllo per la selezione di un cambiapallet mobile
- FAQ di ingegneria
- Passo successivo
- Lettura correlata
- fonti
Cosa mostra il video
A tall stack of film-wrapped cartons on a wooden pallet stands positioned within the mobile pallet changer chassis equipped with dual lateral stabilizing arms. The platform lowers and the side guards swing outward to clear the load footprint, allowing the vertical lifting mechanism to raise the entire cargo block clear of the pallet deck.
With the load suspended securely at height, the discharged pallet is withdrawn manually from the front aperture. Lateral clamping arms maintain full engagement on the sides of the load while a replacement pallet is introduced into the base perimeter using a manual hand pallet truck.
Come funziona il cambio pallet mobile
| step | Che succede |
|---|---|
| Posizione | Il cambia-palloncino si trova vicino al pallet carico |
| Hold | I bracci laterali si chiudono sul carico |
| Sollevamento | La piattaforma solleva il carico completamente |
| Rimuovere | Il vecchio pallet viene estratto dalla parte anteriore. |
| sostituire | Un nuovo pallet viene caricato su un transpallet manuale. |
Because the mobile machine maneuvers directly to the load position, the transfer sequence occurs entirely in-situ without requiring fixed infeed conveyors or dedicated transfer stations. For handling cylindrical roll goods, refer to our pinza elettrica mobile per cambio pallet.
Altezza di sollevamento e spazio libero sopraelevato per carichi alti
Illustrative clearance example:
| Articolo | Valore |
|---|---|
| Altezza di carico (a titolo esemplificativo) | 1,900 mm |
| Altezza del pallet (a titolo esemplificativo) | 150 mm |
| Spazio libero per spostare il pallet (a scopo illustrativo) | 50 mm |
| Sollevamento necessario, 150 + 50 | 200 mm |
| Parte superiore del carico al momento del sollevamento: 1,900 + 200 | 2,100 mm |
We evaluate the dynamic lifted height against your site ceiling joists, light fixtures, rack beams, and transit door openings.
For physical footprint envelope planning on related side-press configurations [manufacturer rating]:
- Nominal load capacity: up to 1,500 kg
- Minimum platform lowered height: down to 320 mm
- Maximum pallet width compatibility: up to 1,200 mm
- Inner leg structural clearance: 1,320 mm
Progettazione per una piccola superficie
| La Domanda | Perché è importante |
|---|---|
| Spazio libero a terra intorno al carico | Spazio per estrarre i pallet |
| Dimensioni dei pallet in entrata e in uscita | Regola la larghezza del braccio e della base |
| peso del carico | Imposta l'ascensore |
| Accesso per transpallet | Spazio per spingere il nuovo pallet |
Tell us the physical space you have, and our engineering department will verify that pallets can be discharged and introduced from accessible transfer orientations.
Baseline chassis envelope reference parameters [manufacturer rating]:
- Machine overall dimensions: 950 mm W × 2,500 mm L × 1,400 mm H (or 2,800 mm W × 1,500 mm L × 1,500 mm H depending on stabilization profile)
- Integrated pallet jack lowered entry profile: 83 mm lowered fork height
- Fork opening range: 813 mm to 1,600 mm; fork lengths: 914 mm or 1,220 mm
- Lifting motor capacity: 1,200 W (powered by 24 V onboard system)
Controlli e sicurezza
The mobile chassis platform lifts a full product load while the lateral side arms close firmly against the packaging wall. Operating personnel must keep hands and feet clear of the perimeter base frame while the load remains suspended. Pallets must only be extracted or inserted when the load is mechanically locked at position and all drive motions are halted.
System compliance depends on destination operating standards:
- ISO 9001 e ISO 14001: Governs basic concepts and risk assessment methodology for machinery design.
- IT 415-10: 2014: Specifies safety requirements for packaging machines and pallet transfer modules.
Lista di controllo per la selezione di un cambiapallet mobile
- Load height and weight (verify against 1,500 kg maximum limit [manufacturer rating]).
- Pallet sizes in and out (confirm base width ≤ 1,200 mm [manufacturer rating]).
- Floor space around the load (adequate clearance for 1,220 mm forks and pallet egress).
- Ceiling, overhead lighting, and transit door clear heights.
- Required pallet change cycles per hour.
- Hand pallet truck or powered walkie access clearance.
FAQ di ingegneria
Q: Why choose a mobile pallet changer? A: It eliminates the requirement for a fixed transfer station or dedicated conveyor cell, allowing pallets to be changed directly where the load stands in restricted floor plans.
Q: How is the old pallet removed? A: The load is clamped by the side arms, lifted 200 mm clear of the deck, and the released pallet is drawn out through the open front frame.
Q: How high does the cargo stack reach during transfer? A: In our baseline worked example, a 1,900 mm load elevated by a 200 mm stroke reaches a total peak height of 2,100 mm at the top surface.
Q: How does the replacement pallet enter the station? A: A replacement pallet is positioned onto a standard low-profile hand pallet truck and rolled directly into the open base chassis underneath the suspended load.
Q: What preliminary engineering data should be submitted for a layout proposal? A: Submit exact product stack dimensions (height, width, depth), total unit weight, pallet specifications (entry dimensions and bottom deck boards), and a basic dimensioned floor plan sketch.
Passo successivo
We plan and validate your mobile pallet changer deployment in three steps:
- Invia il tuo disegno di progetto detailing product stack dimensions, gross weights, and pallet styles to info@fhopepack.com.
- Riceverai una proposta formale entro 48 ore, complete with vertical stroke allowances and perimeter access clearances.
- Prenota un sopralluogo to inspect floor condition, clear door heights, and operating lane dimensions.
Lettura correlata
- Invertitore di pallet
- Video: Cambiapallet a forma di V
- Video: Ruota pallet a 180 gradi e invertitore di pallet tipo C
fonti
- Machine technical specifications: FHOPE engineering team, 2026-10-04
- Equipment catalog profile: Cambio pallet mobile – Pressa laterale
- Product family directory: Mobile Pallet Changers & Inverters
- Lift and clearance calculations: Engineering worked example, illustrative project values
- Demonstration machine footage: FHOPE pallet changing equipment demonstration
- Standard di sicurezza: ISO 9001 e ISO 14001, IT 415-10: 2014
Ultimo aggiornamento: 2026-10-29
Ultimo aggiornamento: 2026-10-29
