कार्यकारी सारांश
A steel wire coil winding and packing machine centres each coil on a rotating worktable, runs a vertical head over the coil while it turns, and hands the finished coil to the conveyor below. The cell keeps the path between steps short, so coils pass through with less manual lifting. Coil size, working stroke and cycle rhythm are confirmed per project.
विषय - सूची
- Why one worktable
- मशीन क्या करती है?
- कोशिका कैसे काम करती है
- Cycle time and control
- फुटेज में क्या दिखाया गया है
- विशिष्ट विन्यास
- चयन चेकलिस्ट
- संचालन और सुरक्षा
- इंजीनियरिंग से संबंधित अक्सर पूछे जाने वाले प्रश्न
- अगला कदम
- संबंधित पढ़ने
- स्रोत और मानक
Why one worktable
A coil that is lifted between several machines picks up handling time and risks edge damage at each move. A single worktable that carries the coil through the winding and packing steps keeps the part in one place and the operators clear of heavy lifts.
Seating each coil on a rotating table also gives the cycle a steady reference point, so the coil is worked around a fixed axis. Coil size and swing radius are confirmed per project.
मशीन क्या करती है?
The machine is a compact cell laid out around a rotating worktable. Coils are placed on the table, a vertical head runs over the top while the table turns, and an arm with rollers carries the finished coil onto the conveyor below.
The cell moves the coil across in a short path, ready for the next operation. Coil size, stroke and conveyor height are confirmed per project.
कोशिका कैसे काम करती है
The rotating worktable carries the coil and turns it under the vertical head, so the working stroke meets every point of the coil face. The vertical head lowers from above and lifts clear when the step is done.
An arm with rollers picks up the finished coil and moves it to the chain conveyor, while pneumatic lines feed the moving parts. The table, head and arm are arranged to suit the coil range per project.
Cycle time and control
With the coil seated on the table, the operator starts the cycle from the control panel on the left of the machine. The table turns while the vertical head runs, then the head lifts and the arm moves the coil to the conveyor, after which the next coil is set on the table.
A stop button and indicator lights sit on the panel within reach of the operator. Cycle rhythm, stroke and table speed are confirmed per project.
फुटेज में क्या दिखाया गया है
Our footage shows a coil set on the rotating worktable while the vertical head runs over the top as the table turns. An arm with light-coloured rollers then carries the finished coil to the chain conveyor below, and a new coil is placed for the next cycle, with the pneumatic lines visible. It is a general demonstration, so your coil size, working stroke and cycle rhythm are confirmed with us per project.
विशिष्ट विन्यास
नीचे दिए गए आंकड़े संख्यात्मक मानों के बजाय कार्यात्मक डिजाइन सीमाओं को सूचीबद्ध करते हैं, और प्रत्येक परियोजना के अनुसार इनकी पुष्टि की जाती है।
| प्राचल | परियोजना के अनुसार पुष्टि की गई सामान्य सीमा |
|---|---|
| भार | steel wire coils set on the rotating worktable |
| प्रक्रिया | vertical head over the coil while the table turns |
| हस्तांतरण | arm moves the finished coil to the chain conveyor |
| नियंत्रण | push buttons, stop button and indicator lights on the panel |
| चलाना | pneumatic lines feeding the head and the arm |
| रखवाली | partition around the cell, arranged per project |
| चक्र | stroke and rhythm staged from the control panel |
| पर्वत | floor, beside the conveyor run |
| विद्युत आपूर्ति | 380 वोल्ट तीन फेज 50 हर्ट्ज, या हल्की मशीनों के लिए 220 वोल्ट सिंगल फेज, परियोजना के अनुसार चयन किया जाता है। |
चयन चेकलिस्ट
| सवाल | प्रत्येक परियोजना के लिए पुष्टि करें |
|---|---|
| कॉइल रेंज | outer and inner diameter, height, weight |
| प्रक्रिया | stroke, table speed, packing pattern |
| हस्तांतरण | conveyor height, arm reach |
| नियंत्रण | panel side, guarding around the cell |
| साइट | floor space and access |
| विद्युत आपूर्ति | साइट पर वोल्टेज, फेज और फ्रीक्वेंसी |
संचालन और सुरक्षा
Seat the coil on the table, start the cycle from the control panel, and let the head run while the table turns. Keep hands clear of the rotating table, the head and the arm while the machine is running, and use the stop button if a coil shifts.
Routine checks cover the table, the head and the conveyor, per the machine manual. Confirm the coil is seated before each cycle.
इंजीनियरिंग से संबंधित अक्सर पूछे जाने वाले प्रश्न
Q: What does this machine do? A: It seats each steel wire coil on a rotating worktable, runs a head over the coil while it turns, and moves the packed coil to the conveyor by a short transfer step.
Q: How does the cycle run? A: The table turns while the head works from above, then the head lifts and the arm transfers the coil, step by step.
Q: Do we load each coil by hand? A: A coil is set on the table by the operator or a crane, and the rest of the cycle runs from the control panel.
Q: Can it handle different coil sizes? A: The table, head and arm are arranged to suit a given coil range, and the working stroke is set by a per-project layout check.
Q: What does it suit? A: Coils that need winding and packing at one station, when the line runs at a steady rhythm set per project.
अगला कदम
- अपनी कॉइल का आकार और वजन info@fhopepack.com पर ईमेल करें।
- We send a winding and packing proposal within 48 hours.
- We confirm the worktable size, stroke and conveyor height for your coils.
संबंधित पढ़ने
- Steel wire coil winding and packing machine video
- पीईटी रैपिंग मशीन
- आंशिक फिल्म रैपिंग और कक्षीय आवरण द्वारा पैकिंग
- एफहोप पैकिंग मशीनरी उत्पाद श्रृंखला
स्रोत और मानक
- आईएसओ 12100:2010 मशीनरी की सुरक्षा, डिजाइन और जोखिम मूल्यांकन के लिए सामान्य सिद्धांत
- EN 415-10:2014 पैकेजिंग मशीनों की सुरक्षा, सामान्य आवश्यकताएँ
- EN ISO 13849-1:2023 मशीनरी की सुरक्षा, नियंत्रण प्रणालियों के सुरक्षा संबंधी भागों की सुरक्षा
FHOPE steel wire coil winding and packing machine demonstration video. Reviewed as a general demonstration; coil size, stroke and cycle rhythm confirmed per project.
अंतिम समीक्षा तिथि: 2026-10-12
