دستگاه تسمه کشی اتوماتیک برای پنل و برد

خلاصه اجرایی یک دستگاه تسمه‌کشی خودکار برای بسته‌بندی پنل و مقوا، هر بسته را به عنوان یک بخش آنلاین از خط بسته‌بندی مقوا، روی نوار نقاله تسمه‌کشی می‌کند. ما تسمه PET یا PP را بر اساس وزن بسته، زمان نگهداری و وضعیت لبه انتخاب می‌کنیم. یک بسته ۱۲۰۰ × ۶۰۰ میلی‌متری با دو تسمه حدود ۹.۴ متر تسمه شامل حاشیه ۲۰٪ اشغال می‌کند. برای مثال، ۴۰ بسته در ساعت، زمان ۹۰ ثانیه است و هر ایستگاه برای هر پروژه پیکربندی می‌شود.

فهرست مندرجات

• کارهایی که دستگاه انجام می‌دهد، به ترتیب
• ایستگاه تسمه‌کشی در خط تخته
• تسمه PET یا PP: چگونه انتخاب کنیم
• فرمول طول بند و فاصله بندها
• سر تسمه‌کش و نوار نقاله
• تعادل بسته و خط تاکت
• چک لیست انتخاب دستگاه تسمه‌کشی تخته
• کنترل‌ها و ایمنی
• سوالات متداول مهندسی
• مرحله بعدی
• خواندن مرتبط
• منابع

کارهایی که دستگاه انجام می‌دهد، به ترتیب

The strapping station operates in a continuous, automated single-station sequence:

1. Stack infeed and positioning: The incoming board bundle advances on the powered roller conveyor and is indexed under the structural strap arch, aligned against reference side guides.
2. Head stroke down: The floating strapping head moves downward until its contact face registers against the top surface of the bundle stack.
3. Strap cycling: The feed mechanism drives the strapping band around the arch track, retracts it onto the bundle perimeter, applies controlled tension, joins the strap via thermal or friction seal, and severs the band with an integrated shear blade.
4. Head retract: The head returns to its elevated home position clear of the transport aperture.
5. Conveyor index: The conveyor advances the stack forward by one programmed strap pitch. Steps 2 through 4 repeat for each subsequent strap location until the bundle recipe is satisfied.
6. Outfeed transfer: The finished bundle is released downstream to the next handling or packaging operation.

During automatic operation, personnel remain strictly outside the machine safety enclosure. Stack adjustments, coil changes, or maintenance are performed exclusively with the station brought to a complete stop, electrically and pneumatically isolated, and locked out under verified safety procedures.

ایستگاه تسمه‌کشی در خط تخته

An automatic board strapping machine functions as an inline station designed to tension, seal, and cut PET or PP straps around stacked boards directly on the material handling line.

On our board packaging lines, the strapping section is engineered for rigid panels using PET or PP strapping belts. It is built online: the stack arrives on the conveyor, is strapped, and leaves on the same conveyor. Around it the line can carry a vacuum lifter, a stacker, a ایستگاه بسته بندی or shrinking station and a palletiser. A similar online layout for long goods is shown in our خط بسته بندی لوله و تسمه کشی PP.

The station must match the conveyor pass-line height on both sides and release each bundle on time. We size the arch, head, strap and conveyor with the rest of the line.

تسمه PET یا PP: چگونه انتخاب کنیم

Both strap materials are supported in our standard board packaging machines. Selecting between them is a physical engineering decision dictated by stack mass, holding duration, and board edge vulnerability, rather than raw material cost:

Use PET for heavy bundles, long storage (months) or sharp edges, and PP for light stacks with protected edges and short storage. In both cases the board edge limits the tension: working tension stays below the edge crush resistance, and corner protection is added where needed.

فرمول طول بند و فاصله بندها

The strap loop length corresponds to the perimeter of the cross-section; it is governed exclusively by bundle width and height, independent of overall board length:

loop length per strap = 2 × (bundle width + bundle height)

strap length per bundle = (loop length + allowance) × number of straps

The allowance factor accounts for the strap seal overlap, feeding clearances, arch track sweep, and external corner protector radii.

Worked example for an illustrative bundle measuring 1,200 mm wide by 600 mm high:

Strap spacing governs bundle structural stability during transit. As a fundamental baseline:

• Place the outer two straps near each end of the bundle, inset sufficiently to avoid corner break-out and to stay clear of designated forklift fork pockets.
• Space intermediate straps evenly so that no unsupported span exceeds the bundle height. For example, a heavy bundle 2,400 mm long and 600 mm high is configured with five strap positions.

سر تسمه‌کش و نوار نقاله

The strapping head is mounted on a rigid overhead arch structure spanning the powered roller conveyor. The conveyor acts as an active positioning axis, indexing the stack to each discrete strapping location.

Three fundamental parameters are configured and stored per product recipe:

• موقعیت‌های بند: Programmed through the operator interface as an encoder-indexed positional recipe, allowing automated changeovers across board formats without physical limit switch adjustments.
• Head stroke limits: The overhead vertical axis lowers the head to the board face to minimise free-air loop tensioning. Soft-touch sensing ensures the head applies necessary sealing contact without mechanically crushing or surface-marking the top board.
• Conveyor indexing and lateral squaring: The conveyor advances one strap pitch per index cycle. Integrated adjustable side guides and an end reference stop centre and square the bundle before each cycle, eliminating angular strap drift—the predominant cause of edge seal failures.

تعادل بسته و خط تاکت

System cycle time must synchronize with upstream manufacturing and downstream discharge. For an illustrative target output of 40 bundles per hour, a strapped bundle must clear the station every 90 s:

The 45 s budget covers head stroke, strap feed, tension, seal, cut and conveyor index. If the sum exceeds the takt, we add a second head, overlap the index with the strap cycle on a longer conveyor, or use fewer straps of a stronger strap.

چک لیست انتخاب دستگاه تسمه‌کشی تخته

• Board classification (gypsum, particleboard, MDF, insulation, composite), single-board thickness, and full stack dimensions (width, height, length).
• Bundle mass range (min/max weight) and downstream material handling mode (forklift tines, clamp truck, or pallet runner).
• Strap specification: PET or PP, designated strap width and thickness, operational tension range, and requirement for automated corner protection.
• Number of strap positions per bundle and distance offsets from the stack ends.
• Infeed and outfeed roller conveyor pass-line height, roller pitch, drive zones, and integrated stack squaring mechanisms.
• Required line output in bundles per hour, with cycle time budgets of upstream stackers and downstream wrapping or palletising cells.
• Control architecture and automation integration: PLC platform, fieldbus communication, safety circuit handshake, and conveyor zone interlocking [manufacturer rating].

کنترل‌ها و ایمنی

حرکت سر و حرکت نوار نقاله، مناطق خطرناک هستند. در حین حرکت خط، همه را خارج از قاب و دور از نوار نقاله نگه دارید. قبل از باز کردن تسمه گیر کرده، تعویض حلقه تسمه یا تنظیم موقعیت تسمه، دستگاه را متوقف، ایزوله و قفل کنید.

Safety integration aligns with destination market regulations. For European CE conformity, risk assessments comply with ISO 12100: 2010, while machine-specific guarding, electrical interlocks, and hazard mitigation meet EN 415-10: 2014 standards for packaging and strapping machinery.

سوالات متداول مهندسی

Q: Should I specify PET or PP strapping for our board bundles? A: Select PET strap when bundles exceed standard industrial weights, undergo flat-bed road transport, or require multi-month outdoor/warehouse storage, as PET retains set tension without significant creep. Specify PP for light-duty, short-haul board packs where edge loading is low. Based on our project engineering data across rigid board and steel panel packaging lines, heavy stacks consistently achieve superior joint stability using high-tensile PET [manufacturer rating]. Specific strap specifications are engineered per project requirements.

Q: Can this strapping station integrate inline with an orbital or horizontal wrapping machine? A: Yes. In automated board packaging lines, the strapping station routinely links downstream of the stacking cell and immediately upstream of a protective stretch wrapping or shrink station to secure bundle geometry before moisture wrapping.

Q: Why is precise mechanical centring essential prior to strap application? A: If a board stack is skewed or offset relative to the arch centerline, the strap feeds unevenly across the corner radii, resulting in concentrated edge tension that can split boards or cause the strap to peel off the bundle edge during transport. Adjustable conveyor side guides eliminate this risk.

مرحله بعدی

To configure and quote an online board strapping station for your packaging line:

1. Submit your line data: Send your board stack dimensions (min/max W × H × L), bundle mass profiles, and required takt time to info@fhopepack.com.
2. دریافت پیشنهاد مهندسی ظرف ۴۸ ساعت: We provide a preliminary station layout, strap type analysis, recommended head configuration, and conveyor interface validation.
3. Conduct a technical layout review: Our engineering team reviews conveyor pass-line heights, fieldbus handshakes, and bundle indexing integration with your project team.

خواندن مرتبط

• خط بسته بندی مقوایی اتوماتیک
• خط بسته بندی تخته گچی با بسته بندی مداری
• خط بسته بندی تسمه بسته بندی چوب اتوماتیک
• دستگاه بسته بندی و تسمه کشی لوله فولادی اتوماتیک

منابع

• بخش تسمه‌کشی آنلاین با تسمه‌های تسمه‌کشی PET یا PP: خط بسته بندی مقوایی اتوماتیک
• Strap length worked example: calculated from bundle width and height dimensions, illustrative baseline engineering values
• Bundle timing and line balance: derived from production output targets, checked against the head stroke and conveyor index time
• دستگاه در حال کار: ویدیوی ما در یوتیوب
• دامنه استانداردها: ISO 12100: 2010 (ایمنی ماشین آلات - اصول کلی طراحی) EN 415-10: 2014 (ایمنی ماشین‌های بسته‌بندی - بخش ۱۰: الزامات عمومی)
• Strapping machine product range: دستگاه تسمه اتوماتیک

آخرین بررسی: 2026-10-04