Automaatne pudelite kokkutõmbumisvastane kiletamismasin

Name: Automaatne pudeli kahanevate pakkimismasin firmalt FHOPE
Uploaded: 2023-03-22T08:30:00+00:00
Duration: 1 min 46 s
Description: > **Executive summary** > > An automatic bottle shrink wrapping machine groups bottles into a pack, wraps a sleeve of PE film around it, seals it and shrinks it tight in a heat tunnel. The result is a stable multipack with open bull's-eye ends, without a carton. Our sleeve shrink…

Kokkuvõte

An automatic bottle shrink wrapping machine groups bottles into a pack, wraps a sleeve of PE film around it, seals it and shrinks it tight in a heat tunnel. The result is a stable multipack with open bull's-eye ends, without a carton. Our sleeve shrink bundlers do this at 10–20 or 8–18 packs per minute depending on model. This page covers the cycle, film sizing, the tunnel and the buyer checklist.

Grouped white bottles move into a stainless sealing section, where pneumatic cylinders drive the sealing bar across the film. The packs then pass the film curtain into the mesh tunnel and come out with the film shrunk tight around the bottles.

Why sleeve shrink for bottles

A sleeve pack uses film only, no carton or tray, so packaging cost and waste are lower. The film holds the bottles tight as one unit, keeps caps clean, and the open ends act as handles. The bottles stay visible, which suits retail display.

Pakkimistsükkel

Group: bottles are collated into the pack pattern on the infeed.
Sleeve: the pack pushes into a curtain of PE film fed from rolls above and below.
Seal and cut: the alloyed sealing knife, Teflon-coated against sticking, seals and cuts the film behind the pack.
Kahanda: the pack passes through the heat tunnel on a mesh or roller conveyor, and the film shrinks tight.
Out: the pack cools on the outfeed, ready for palletizing.

A touch screen with PLC and temperature controller sets the sealing time, temperature and conveyor speed.

Mudelivalikud

Kirje	SK-060ABS	SK-080A
Max pack size	280 × 180 × 150 mm	420 × 300 × 300 mm
Väljund	10–20 pakki minutis	8–18 pakki minutis
Max film	350 mm wide, 280 mm roll OD	600 mm wide, 280 mm roll OD
tunnel	entrance 1,040 × 355 × 220 mm	1,800 mm pikk, sissepääs 600 × 400 mm
Tunnelkonveier	steel mesh, Teflon mesh or rollers	chains with silicone-coated rods
võim	max 8 kW	max 20.5 kW
Õhk	5 baari max	kinnitatud hinnapakkumise ajal
Töökõrgus	850–900 mm	kinnitatud hinnapakkumise ajal

Both run on 380 V, 50–60 Hz, 3-phase power and use PE shrink film; SK-060ABS is stainless steel and weighs 600 kg. Film thickness and shrink grade are matched to your bottles and confirmed at quote.

Film width and cut length

Film width ≈ pack width + pack height. For the largest SK-060ABS pack, 180 + 150 = 330 mm, inside its 350 mm film limit (example only). Wider film closes the bull's-eye; narrower film leaves a bigger opening and a weaker pack.

Cut length ≈ 2 × (pack length + pack height) + seal overlap. For 280 × 150 mm that is 2 × (280 + 150) = 860 mm before overlap (example only). At 15 packs per minute, 15 × 60 = 900 packs per hour use about 0.86 × 900 = 774 m of film per hour. Use that to plan roll changes.

Kahanev tunnel

The pack must fit the tunnel entrance with clearance, so check pack height against 220 mm on SK-060ABS or 400 mm on SK-080A. Tunnel speed is variable: slow it for thicker film or cold product, speed it up for thin film. Steel or Teflon mesh suits light, small packs; chains with silicone-coated rods carry heavier bottle bundles without the film sticking. Let packs cool on the outfeed before stacking, so the film sets; the cooling length is confirmed at quote.

Valiku kontroll-leht

Bottle diameter, height, material (PET, HDPE or glass) and filled weight?
Pack pattern (for example 2 × 3 or 3 × 4) and pack dimensions?
Output in packs per minute?
Kile tüüp ja paksus?
Upstream filler and capper speed?
Palletizing after shrink?

ohutus

The machine is designed to EN ISO 12100:2010 for risk assessment, EN 415-10 for packaging machine safety and EN 60204-1 for electrical equipment. The sealing knife and hot tunnel are the main hazards, so the sealer is guarded, the tunnel surfaces are insulated, and the panel has an emergency stop.

Inseneri KKK

Q: How fast is it? A: 10–20 packs per minute on SK-060ABS and 8–18 on SK-080A.

Q: What film does it use? A: PE shrink film, up to 350 mm wide on SK-060ABS and 600 mm on SK-080A.

Q: What pack size fits? A: Up to 280 × 180 × 150 mm on SK-060ABS and 420 × 300 × 300 mm on SK-080A.

Q: Can it link to my filling line? A: Yes, the infeed is matched to your filler output, confirmed at quote.

Järgmine samm

Send your bottle size, pack pattern and output aadressile info@fhopepack.com.
Meie suurus the sleeve wrapper and tunnel.
Vastame 24 tunni jooksul ettepaneku ja hinnapakkumisega.