> **Kokkuvõte**
> This clip shows a 180 degree turning machine in a glass line. A sheet arrives on a roller conveyor, the turning frame clamps it between two roller beds, turns it over and sends it on with the other face up. The footage was shared with us; our equivalent solution turns glass, metal sheet, board and panels the same way, with the frame sized to your largest sheet.
Sisukord
- Mida klipp näitab
- Miks lehte ümber pöörata
- Lehtede arv tunnis
- Mida me rea kohta määrame
- Valiku kontroll-leht
- ohutus
- Inseneri KKK
- Järgmine samm
- Seotud lugemine
- Allikad
Mida klipp näitab
| Samm | Mida sa näed |
|---|---|
| Infeed | A large glass sheet travels in on a powered roller conveyor |
| Clamping | The turning frame closes its roller beds on both faces of the sheet |
| Turning | The frame rotates the sheet through 180 degrees inside a yellow guard |
| Outfeed | The sheet rolls out with its other face up |
| Line | Further roller conveyors run on through the plant |
Miks lehte ümber pöörata
- **Two-sided work.** Inspection, coating or cleaning of both faces without lifting by hand.
- **Less breakage.** Rollers on both faces hold the sheet through the whole turn.
- **No crane.** Large sheets are turned in line, so the crane stays free.
- **Steady flow.** The turner keeps pace with the conveyor, so sheets do not queue.
Lehtede arv tunnis
**Töötatud näide (illustreeriv).**
| Üksus | Väärtus |
|---|---|
| Turn cycle (illustrative) | 30 s |
| Infeed and outfeed (illustrative) | 30 s |
| Cycle per sheet, 30 + 30 | 60 s |
| Sheets per hour, 3,600 ÷ 60 | 60 sheets |
Mida me rea kohta määrame
| Seadistus | Sõltub |
|---|---|
| Frame size | Largest sheet length and width |
| Clamping | Roller beds or soft pads, per surface |
| Turn angle | 180 degrees, or 90 degrees to stand sheets up |
| Conveyor height | Your existing line |
Valiku kontroll-leht
- [ ] Largest and smallest sheet size.
- [ ] Sheet thickness and weight.
- [ ] Surface that must not be marked.
- [ ] Sheets per hour.
- [ ] Conveyor height and direction.
- [ ] Turn angle: 180 or 90 degrees.
ohutus
- Keep clear of the turning frame and fence it with interlocked gates.
- Stop the turner before removing a broken sheet.
- Wear cut-resistant gloves when handling glass.
- CE-turgude jaoks on masin konstrueeritud vastavalt standarditele ISO 12100 ja EN 415-10.
Inseneri KKK
Q: What does a 180 degree turning machine do?
A: It flips a sheet over in the line so the other face is up.
Q: Which products can it turn?
A: Glass, metal sheet, board and panels, with the frame sized to the largest sheet.
Q: How is the sheet held during the turn?
A: Roller beds close on both faces, so the sheet cannot slide.
Q: How many sheets per hour?
A: About 60 sheets per hour with an illustrative 60 s cycle (30 s turn plus 30 s transfer); real output depends on sheet size and line speed.
Q: Can it turn 90 degrees?
A: Yes. We set it for 90 degrees when sheets must stand up.
Q: Can you build this configuration?
A: Yes. We build equivalent turning machines sized to your sheets and conveyor line.
K: Millised standardid kehtivad?
A: CE-turgude puhul ISO 12100 ja EN 415-10.
Järgmine samm
Me sobitame lehtmetalli treimismasina kolmes etapis:
1. **Submit your layout drawing** with sheet sizes, weights, surface needs and sheets per hour, to **info@fhopepack.com**.
2. **Saage 48 tunni jooksul pakkumine** koos masina andmete ja paigutusega.
3. **Book a site survey** so we confirm the conveyor heights.
Seotud lugemine
- [Steel Sheet Upender for 180 Degree Safety Turning](https://www.fhopepack.com/videos/steel-sheet-upender-for-180-degree-safety-turning/)
- [Big Frame Flipper for 180 Degree Turning](https://www.fhopepack.com/videos/big-frame-flipper-for-180-degree-turning/)
- [90-Degree Tilter for Palletised Panel Stacks](https://www.fhopepack.com/videos/mechanical-90-degree-tilter-for-palletized-sheet-stack-handling/)
- [Upender with conveyor](https://www.fhopepack.com/Mechanical/Upender-with-conveyor.html)
Allikad
- Masina sisu: FHOPE insenerimeeskond, 10.10.2026
- Clip: [the video on YouTube](https://www.youtube.com/watch?v=pikN4vdLTJA)
- Sheets per hour: our worked example, illustrative values
- Standardite ulatus: ISO 12100:2010; [EN 415-10:2014](https://www.nen.nl/en/nen-en-415-10-2014-en-191845)
- Pakkumise ajastus: heakskiidetud koja CTA (pakkumine 48 tunni jooksul)
Viimati üle vaadatud: 2026-10-10
