> **Shrnutí**
> This clip shows our online bundling line at the end of a plastic pipe extrusion line. Pipes arrive from the extruder, a lifter counts them one by one, the line gathers and aligns a bundle, and one head bands it with stretch film in three places (film strapping rather than plastic or steel strap). Our online line handles bundles of Φ120–Φ180 mm and 5–50 kg at more than one bundle per minute.

Obsah

• Co klip ukazuje
• Průběh procesu
• Proč páskovat plastové trubky strečovou fólií
• Online linková data
• Trubky za minutu
• Kontrolní seznam pro výběr
• Bezpečnost
• Často kladené otázky k inženýrství
• Další krok
• Související čtení
• Zdroje

Co klip ukazuje

| Part of the clip | What you see |
|---|---|
| Line end | The extrusion line in the background, with the control panel of the bundling line |
| Feeding | White plastic pipes run along the line toward the bundling section |
| Gathering | Pipes collect in a trough and line up into a bundle |
| Strapping | A yellow strapping unit wraps green stretch film around the bundle at set points |
| Result | Strapped pipe bundles lie on the outfeed rack |

Průběh procesu

| Krok | Co se stane |
|---|---|
| 1 | Pipes feed in from the extruder |
| 2 | The program counts the pipes |
| 3 | Pipes are stored in a buffer |
| 4 | Pipes are gathered and arrayed |
| 5 | The bundle ends are aligned |
| 6 | The bundle is strapped with stretch film |
| 7 | The bundle moves on to bagging or outfeed |

Proč páskovat plastové trubky strečovou fólií

- **No marks.** Film bands hold the pipes without cutting into the surface as hard strap can.
- **Three points.** One head straps three positions, so the bundle stays straight along its length.
- **Set count.** The pipes per bundle are set in the program and can be changed.
- **Inline.** The line runs at the extruder, so pipes go from cutting to bundle without a manual step.

Online linková data

Naše publikovaná data pro online linku pro svazování potrubí:

| Item | Published value |
|---|---|
| Bundle OD | Φ120–Φ180 mm |
| Pipe length | 3 m (6 m optional) |
| Hmotnost svazku | 5–50 kg |
| Counting | Automatic, by program setting |
| Lifting speed | Up to 50–60 pcs/min |
| Bundling speed | More than 1 bundle/min |
| Strapping | LLDPE stretch film, 50–100 mm wide, three positions |
| Control | PLC and HMI, manual and automatic modes |

U nerovných trubek může být při zavádění potřeba ruční pomoc a každá řada je přizpůsobena velikosti vaší trubky.

Trubky za minutu

**Worked example (illustrative).** With 10 pipes per bundle and 1 bundle per minute, the line takes 10 × 1 = 10 pipes per minute from the extruder. The lifter tops out at 50–60 pcs/min, so the bundling rate, not the lifter, sets the output in this case.

Kontrolní seznam pro výběr

- [ ] Pipe OD and length.
- [ ] Pipes per bundle and bundle weight.
- [ ] Pipes per minute from your extruder.
- [ ] Film strapping only, or bagging after strapping.
- [ ] Online at the extruder or offline from baskets.
- [ ] Floor space at the line end.

Bezpečnost

- Keep clear of the strapping ring while it turns.
- Stop the line before clearing a pipe jam.
- Keep hands away from the lifter and gathering trough.
- For CE markets, the line is designed to ISO 12100 and EN 415-10.

Často kladené otázky k inženýrství

Q: What bundle sizes does the line take?
A: Bundle OD Φ120–Φ180 mm and 5–50 kg, with 3 m pipes as standard and 6 m optional.

Q: How fast does it bundle?
A: More than 1 bundle per minute on our published data.

Q: How are pipes counted?
A: Automatically, by the program setting, as the lifter lifts them one by one.

Q: What is the strap?
A: LLDPE stretch film 50–100 mm wide, applied in three positions by one head.

Q: How many pipes per minute does it take?
A: It depends on the pipes per bundle; the lifter reaches 50–60 pcs/min, and 10 pipes per bundle at 1 bundle per minute take 10 per minute in the worked example.

Q: Can it run offline?
A: Yes, the storage and feeding system supports both online and offline bundling.

Otázka: Které normy platí?
A: Pro trhy CE platí normy ISO 12100 a EN 415-10.

Další krok

Dimenzování svazkování plastových trubek provádíme ve třech krocích:

1. **Submit your layout drawing** with pipe sizes, pipes per bundle and extruder output, to **info@fhopepack.com**.
2. **Do 48 hodin obdržíte nabídku** s údaji o stroji a rozvržením.
3. **Book a site survey** so we confirm the extruder interface.

Související čtení

- [Horizontal Orbital Wrapping Machine for Pipes](https://www.fhopepack.com/videos/automatic-horizontal-orbital-wrapping-machine-for-pipes-and-bundles/)
- [Orbital Wrapper for Long Bars](https://www.fhopepack.com/videos/orital-wrapper-for-long-object-3-straps-packing/)
- [Steel Tube Bundle Strapping Machine in Production](https://www.fhopepack.com/videos/custom-features-vs-standard-models-how-to-choose-a-steel-profile-strapping-machine/)
- [Online pipe bundling line data](https://www.fhopepack.com/Plastic-Pipe-Packing-Line/on-line.html)

Zdroje

- Clip: [the video on YouTube](https://www.youtube.com/watch?v=hdmBIw8mhAI)
- Process flow, bundle range, speeds, film and control: [online pipe bundling line data](https://www.fhopepack.com/Plastic-Pipe-Packing-Line/on-line.html)
- Pipes per minute: our worked arithmetic
- Rozsah norem: ISO 12100:2010; [EN 415-10:2014](https://www.nen.nl/en/nen-en-415-10-2014-cs-191845)
- Načasování návrhu: schválený CTA (návrh do 48 hodin)

Naposledy zkontrolováno: 10. 10. 2026