تغليف حزم الأخشاب

ملخص تنفيذي

Timber bundle packaging wraps long timber pieces in transparent film as the bundle travels along a conveyor. A horizontal wrapping machine for bundles lays a film cover over the load, a clamp holds the bundle in place, and the wrapped bundle leaves the machine ready for the next step. Wrapping the bundle in one pass keeps the timber together and the surface clean while it is handled. Bundle size, film choice and line speed are confirmed per project.

جدول المحتويات

Why wrap timber bundles

Bundled timber can shed splinters, stain or pick up moisture while it is stored or shipped. Wrapping the bundle in film holds the pieces together and keeps the surface clean until the timber reaches the end user.

Wrapping on a machine applies the cover in one pass, so every bundle leaves the line with the same protection. Bundle size and film choice are confirmed per project.

ماذا تفعل الآلة

The machine is a horizontal wrapping unit for bundles, with a conveyor through the middle and a wrap station at one end. A bundle of timber travels in on the conveyor, a clamp and wrap head lay film over the load, and a roller settles the film around the bundle.

The wrapped bundle leaves on the output side while the next bundle is loaded. Bundle length and line speed are confirmed per project.

Conveyor and clamp arm

A conveyor carries the timber bundle through the wrapping area. A clamp arm above the line lowers onto the bundle to hold it in place while the wrap is applied, and the wrap head feeds film over the moving load.

A roller on the machine follows the wrap and settles the film onto the surface of the bundle as it passes. Film width and clamp travel are confirmed per project.

دورة اللف والتحكم

The cycle starts when the timber bundle enters the wrap station on the conveyor. The clamp arm lowers to hold the bundle, film is fed over the load as it passes, and the roller settles the cover before the wrap is complete.

Once the wrap is done, the clamp lifts and the wrapped bundle continues out. A control box on the machine carries the cycle controls, and the line returns to the start position after each bundle. Cycle time and wrap pattern are confirmed per project.

ما تُظهره اللقطات

Our footage shows a long timber bundle travelling along the conveyor into the wrap station, with a clamp arm lowering to hold the bundle in place. The wrap head lays film over the load and a roller settles the film onto the surface as the bundle passes. It is a general demonstration, so your bundle size, film choice and line speed are confirmed with us per project.

تكوين نموذجي

تُدرج الأرقام أدناه حدود التصميم الوظيفي بدلاً من القيم العددية، ويتم تأكيدها لكل مشروع على حدة.

معامل النطاق النموذجي، يتم تأكيده لكل مشروع
حمل long timber bundles on the conveyor
طريقة عملنا transparent film laid over the bundle
عقد clamp arm lowers to hold the bundle
لف الرأس film fed over the moving load
اللمسات الأخيرة roller settles the film on the surface
خدمة النقل conveyor in, wrapped bundle out
السيطرة control box with cycle controls
جبل floor, in line with the timber flow
التيار الكهربائي 380 فولت ثلاثي الأطوار 50 هرتز، أو 220 فولت أحادي الطور للآلات الخفيفة، يتم اختيارها حسب المشروع

قائمة التحقق من الاختيار

سؤال تأكيد لكل مشروع
مجموعة الحزم الطول، العرض، الارتفاع، الوزن
افلام العرض، السماكة، التمدد
دورة feed speed, wrap time, clamp sequence
لاين ارتفاع الناقل، ومنافذ الدخول والخروج
موقع مساحة أرضية، إمكانية الوصول من كلا الطرفين
التيار الكهربائي الجهد والطور والتردد في الموقع

التشغيل والسلامة

Feed the bundle onto the conveyor, start the wrap cycle, and let the clamp and wrap head cover the load while it passes. Keep hands clear of the conveyor and the clamp arm while the machine is running.

Routine checks cover the conveyor, the clamp arm and the film supply, per the machine manual. Confirm the bundle is straight on the conveyor before each cycle.

أسئلة وأجوبة هندسية

Q: What does this machine do? A: It wraps long timber bundles in transparent film as they travel along a conveyor.

Q: How is the film applied? A: The clamp holds the bundle in place while the wrap head feeds film over the load and a roller settles it on the surface.

Q: Do we load each bundle by hand? A: The footage shows the bundle fed on a conveyor; upstream feeding can be arranged for higher rates per project.

Q: Can it handle different bundle sizes? A: The clamp and wrap head adapt within the machine range; your bundle dimensions are confirmed per project.

Q: What does it suit? A: Long timber, boards and profiles that need a clean, tight film cover before storage or transport.

الخطوة التالية

  1. أرسل لنا بريدًا إلكترونيًا على info@fhopepack.com مع ذكر حجم الحزمة ووقت الدورة.
  2. We send a timber wrapping proposal within 48 hours.
  3. نؤكد لكم واجهة الناقل واختيار الفيلم المناسب لخط الإنتاج الخاص بكم.

المصادر والمعايير

FHOPE horizontal wrapping machine for timber bundles demonstration video. Reviewed as a general demonstration; bundle size, film choice and line speed confirmed per project.

آخر مراجعة: 12-10-2026

منشورات ذات علاقة

احجز مكالمة
احجز مكالمة