{"id":17416,"date":"2026-08-24T16:58:54","date_gmt":"2026-08-24T08:58:54","guid":{"rendered":"https:\/\/www.fhopepack.com\/zh\/?p=17416"},"modified":"2026-08-24T16:58:54","modified_gmt":"2026-08-24T08:58:54","slug":"automatic-door-wrapping-machine-stretch-wrapper","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/zh\/automatic-door-wrapping-machine-stretch-wrapper\/","title":{"rendered":"Automatic door wrapping machine\/stretch wrapper"},"content":{"rendered":"<blockquote>\n<p><strong>Caveat:<\/strong> All supplier-attributed prices, dimensions, and configuration details in this analysis derive from the source quotation dated July 7th and are <strong>pending written confirmation<\/strong>. Values marked <em>as quoted<\/em> originate from that document; values marked <em>estimated<\/em> are industry rule-of-thumb benchmarks, not measured field data. Obtain the full quotation document and technical datasheet before issuing a purchase order.<\/p>\n<\/blockquote>\n<p><strong>Summary:<\/strong> This guide delivers a technical comparison between the fully automatic FHOPE E-1200 Orbital Horizontal Stretch Wrapping Machine \u2014 configured with 3.0 m in-feed and 3.0 m out-feed belt conveyors \u2014 and manual stretch wrapping. It covers five evaluation criteria, a flagged head-to-head comparison table, a sequential purchase checklist, and terms explained for non-specialist buyers evaluating products up to 3,000 mm \u00d7 800 mm \u00d7 120 mm at 10 kg.<\/p>\n<blockquote>\n<p><strong>Common mistake:<\/strong> Buyers compare FOB against CIF prices before verifying the product envelope. Per the supplier quotation, the E-1200 accepts maximum product dimensions of <strong>3,000 mm length, 800 mm width, 120 mm thickness, and 10 kg weight<\/strong> (<em>as quoted<\/em>). Measure your largest SKU \u2014 not the average \u2014 before evaluating any price. One oversized part will jam the orbital ring, and no price comparison will fix that.<\/p>\n<\/blockquote>\n<h2>\ud83d\udee0\ufe0f Evaluation Criteria<\/h2>\n<iframe width=\"100%\" height=\"420\" src=\"https:\/\/www.youtube.com\/embed\/fa_m0b8IbLU?rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen><\/iframe>\n<p><strong>A correct evaluation of an orbital horizontal stretch wrapper requires five data points: the maximum product envelope (length, width, thickness, weight), required throughput per shift, labor cost per shift, film consumption per package, and total cost of ownership \u2014 machine price, freight, insurance, installation, and consumables \u2014 evaluated with FOB and CIF delivery terms defined per Incoterms 2020.<\/strong><\/p>\n<p><strong>Key Point: product envelope is the hard gate.<\/strong> The supplier quotation specifies a maximum <strong>3,000 mm length, 800 mm width, 120 mm thickness, and 10 kg per product<\/strong> (<em>as quoted<\/em>). Audit every distinct SKU against these limits \u2014 not just your fastest-moving line. An overwidth or over-thick product will not clear the orbital ring and cannot be accommodated by adjustments on the standard machine.<\/p>\n<p><strong>Throughput is the second gate.<\/strong> Count pieces wrapped per hour today and project annual volume. The quoted E-1200 operates on a fixed, PLC-controlled cycle with <strong>3.0 m in-feed and 3.0 m out-feed belt conveyors<\/strong> (<em>as quoted<\/em>), supervised by one operator. Cycle time scales with product length: a longer product takes proportionally longer to pass through the ring at a given conveyor speed.<\/p>\n<p><strong>Labor is the third gate.<\/strong> Manual wrapping typically deploys <strong>2\u20133 workers per shift<\/strong> on the line; machine wrapping requires <strong>1 operator<\/strong> for loading, supervision, and unloading (<em>estimated<\/em>, based on typical automatic wrapper staffing). Multiply the labor reduction by your loaded wage rate across 12 months to derive realistic annual savings.<\/p>\n<p><strong>Film cost is the fourth gate.<\/strong> Machine-controlled film tension is more uniform than hand-applied tension. Industry rule-of-thumb indicates a <strong>30\u201350% film consumption reduction<\/strong> with machine wrapping versus hand wrapping (<em>estimated<\/em>, not measured in this source). Reference <strong>ASTM D4649<\/strong> when selecting film grade for machine versus manual application, and validate consumption claims with your film supplier before financial modelling.<\/p>\n<p><strong>Total delivered cost is the final gate.<\/strong> Under <strong>Incoterms 2020<\/strong>, published by the International Chamber of Commerce, <strong>FOB (Free On Board)<\/strong> transfers responsibility once goods are loaded on the vessel at the origin port; <strong>CIF (Cost, Insurance, Freight)<\/strong> additionally covers freight and marine insurance to the named destination port. The source quotation provides both figures; CIF Misrata, Libya, represents the higher fixed cost at port, before inland transport and installation.<\/p>\n<h2>\ud83c\udfd7\ufe0f Option A: FHOPE E-1200 Automatic Orbital Wrapper<\/h2>\n<p><strong>Option A is the fully automatic FHOPE E-1200 Orbital Horizontal Stretch Wrapper, quoted July 7th, with 3.0 m in-feed and 3.0 m out-feed belt conveyors. It handles long, flat products up to 3,000 mm length, 800 mm width, 120 mm thickness, and 10 kg, with PLC-based cycle control for repeatable spiral wrapping.<\/strong><\/p>\n<p>For readers new to this equipment class: an <strong>orbital ring<\/strong> is a rotating circular frame that carries the film roll around the product. A <strong>PLC (Programmable Logic Controller)<\/strong> is the industrial computer that sequences ring rotation, conveyor feed speed, film tension, and the automatic cut cycle. The resulting <strong>spiral wrap<\/strong> is a continuous helical film layer applied along the product length as the belt conveyor advances the product axially through the ring; the helix pitch is determined by the ratio of conveyor feed speed to ring rotational speed.<\/p>\n<p>Operating sequence as configured:<\/p>\n<ol>\n<li>\n<p>Product enters on the <strong>3.0 m in-feed belt conveyor<\/strong>.<\/p>\n<\/li>\n<li>\n<p>The orbital ring rotates the film roll around the product while the product remains stationary in the horizontal plane.<\/p>\n<\/li>\n<li>\n<p>The conveyor advances the product through the ring, generating the <strong>spiral wrap<\/strong> pattern.<\/p>\n<\/li>\n<li>\n<p>The wrap cycle ends with automatic film cutting, and the wrapped product exits on the <strong>3.0 m out-feed belt conveyor<\/strong>.<\/p>\n<\/li>\n<\/ol>\n<p><strong>Key Point: both quoted conveyors are within scope.<\/strong> The supplier quotation explicitly states the E-1200 includes &#8220;3.0m in-feed &amp; 3.0m out-feed belt conveyor&#8221; (<em>as quoted<\/em>). Verify this line on the proforma invoice and purchase order. The supplier&#8217;s claimed company history is not independently verified in the source documentation and should not be a purchase criterion.<\/p>\n<p>Pricing from the source quotation: <strong>FOB USD 780<\/strong> and <strong>CIF Misrata, Libya USD 1,286<\/strong> (<em>as quoted, dated July 7th; pending written confirmation<\/em>). Confirm in writing that these prices cover the complete machine, both conveyors, the PLC control system, and all standard accessories before releasing funds.<\/p>\n<p>Performance profile per evaluation criterion:<\/p>\n<ul>\n<li>\n<p><strong>Product capacity:<\/strong> maximum <strong>3,000 mm \u00d7 800 mm \u00d7 120 mm<\/strong> at <strong>10 kg<\/strong> (<em>as quoted<\/em>; see table below).<\/p>\n<\/li>\n<li>\n<p><strong>Labor:<\/strong> <strong>1 operator<\/strong> for supervision and loading\/unloading (<em>estimated<\/em>).<\/p>\n<\/li>\n<li>\n<p><strong>Throughput:<\/strong> fixed PLC-controlled cycle; production rate depends on conveyor speed and product length.<\/p>\n<\/li>\n<li>\n<p><strong>Film efficiency:<\/strong> machine-controlled tensioning; industry rule-of-thumb suggests <strong>30\u201350% film reduction<\/strong> versus manual wrapping (<em>estimated<\/em>, not field-measured).<\/p>\n<\/li>\n<li>\n<p><strong>Consistency:<\/strong> repeatable, PLC-controlled wrap geometry every cycle, eliminating operator-to-operator variation.<\/p>\n<\/li>\n<li>\n<p><strong>Infrastructure:<\/strong> electrical voltage\/frequency, installed power, and compressed air consumption are <strong>not stated in the source document<\/strong> \u2014 request the technical datasheet before planning plant utilities.<\/p>\n<\/li>\n<li>\n<p><strong>After-sales:<\/strong> warranty, lead time, spare parts, installation, and operator training are <strong>requested but unconfirmed<\/strong> in the source correspondence.<\/p>\n<\/li>\n<\/ul>\n<table>\n<thead>\n<tr>\n<th>Parameter<\/th>\n<th>Value<\/th>\n<th>Evidence status<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Machine model<\/td>\n<td>E-1200 orbital horizontal stretch wrapper<\/td>\n<td>As quoted<\/td>\n<\/tr>\n<tr>\n<td>In-feed conveyor<\/td>\n<td>3.0 m belt conveyor<\/td>\n<td>As quoted<\/td>\n<\/tr>\n<tr>\n<td>Out-feed conveyor<\/td>\n<td>3.0 m belt conveyor<\/td>\n<td>As quoted<\/td>\n<\/tr>\n<tr>\n<td>Max product length<\/td>\n<td>3,000 mm<\/td>\n<td>As quoted<\/td>\n<\/tr>\n<tr>\n<td>Max product width<\/td>\n<td>800 mm<\/td>\n<td>As quoted<\/td>\n<\/tr>\n<tr>\n<td>Max product thickness<\/td>\n<td>120 mm<\/td>\n<td>As quoted<\/td>\n<\/tr>\n<tr>\n<td>Max product weight<\/td>\n<td>10 kg<\/td>\n<td>As quoted<\/td>\n<\/tr>\n<tr>\n<td>FOB price (July 7 quote)<\/td>\n<td>USD 780<\/td>\n<td>As quoted; pending written confirmation<\/td>\n<\/tr>\n<tr>\n<td>CIF Misrata, Libya price<\/td>\n<td>USD 1,286<\/td>\n<td>As quoted; pending written confirmation<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>\ud83d\udcc8 Option B: Manual Wrapping<\/h2>\n<p><strong>Option B is the manual baseline: operators hand-wrap each product with cast LLDPE stretch film applied from a handheld dispenser, with no powered conveyor, no orbital ring, and no automation. It is the standard low-cost reference for door, panel, and profile fabricators with low daily volumes or highly irregular product geometry.<\/strong><\/p>\n<p>Typical manual process:<\/p>\n<ul>\n<li>\n<p><strong>2\u20133 workers<\/strong> position the product on a roller table or floor.<\/p>\n<\/li>\n<li>\n<p>One worker unwinds cast stretch film from a handheld dispenser and applies overlapping passes along the product length.<\/p>\n<\/li>\n<li>\n<p>Film tension, overlap ratio, and wrap count vary with operator skill, shift, and fatigue.<\/p>\n<\/li>\n<\/ul>\n<p>Option B remains viable when daily output is below roughly <strong>50 pieces<\/strong> (<em>estimated<\/em>, industry rule-of-thumb), when product shapes change frequently, or when no capital budget has been approved for automation.<\/p>\n<p>Cost and performance profile:<\/p>\n<ul>\n<li>\n<p><strong>Initial cost:<\/strong> low \u2014 film dispensers typically cost <strong>USD 0\u2013500<\/strong> (<em>estimated<\/em>, typical market range); no machinery purchase required.<\/p>\n<\/li>\n<li>\n<p><strong>Product capacity:<\/strong> no hard envelope limit; the practical ceiling is <strong>worker strength and ergonomics<\/strong>.<\/p>\n<\/li>\n<li>\n<p><strong>Labor:<\/strong> <strong>2\u20133 workers per shift<\/strong>, full-time dedicated or rotating.<\/p>\n<\/li>\n<li>\n<p><strong>Throughput:<\/strong> low and operator-dependent; varies with product length and wrap specification.<\/p>\n<\/li>\n<li>\n<p><strong>Film efficiency:<\/strong> hand-applied tension achieves low stretch rates, consuming <strong>an estimated 30\u201350% more film<\/strong> than machine-controlled wrapping (<em>estimated<\/em>, industry rule-of-thumb).<\/p>\n<\/li>\n<li>\n<p><strong>Consistency:<\/strong> wrap quality <strong>varies by worker and shift<\/strong>, increasing transit-damage risk.<\/p>\n<\/li>\n<li>\n<p><strong>Infrastructure:<\/strong> none required for the wrapping operation itself \u2014 no electrical supply or compressed air.<\/p>\n<\/li>\n<li>\n<p><strong>After-sales:<\/strong> not applicable.<\/p>\n<\/li>\n<\/ul>\n<p><strong>Key Point: manual wrapping has hidden recurring costs.<\/strong> Beyond film waste, it consumes <strong>2\u20133 full-time wages<\/strong>, incurs higher transit-damage claims, and elevates ergonomic injury risk. Run a 12-month cost model \u2014 wages plus film waste plus damage write-offs \u2014 before rejecting the E-1200 on sticker price alone.<\/p>\n<h2>\ud83d\udee1\ufe0f Head-to-Head Comparison<\/h2>\n<p><strong>The table below compares Option A and Option B across nine decision categories: initial outlay, delivered cost, product envelope, labor, throughput, film efficiency, wrap consistency, infrastructure, and after-sales support. Values are marked <em>as quoted by supplier<\/em> or <em>estimated<\/em> so decision-makers can distinguish confirmed data from industry benchmarks.<\/strong><\/p>\n<table>\n<thead>\n<tr>\n<th>Evaluation criterion<\/th>\n<th>Option A: E-1200 automatic<\/th>\n<th>Option B: Manual \/ semi-auto<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Initial cost (FOB)<\/td>\n<td><strong>USD 780<\/strong> (<em>as quoted<\/em>; confirm scope)<\/td>\n<td><strong>USD 0\u2013500<\/strong> (<em>estimated<\/em>; dispensers only)<\/td>\n<\/tr>\n<tr>\n<td>Delivered cost (CIF Misrata)<\/td>\n<td><strong>USD 1,286<\/strong> (<em>as quoted<\/em>; same document)<\/td>\n<td>Freight on film consumables only<\/td>\n<\/tr>\n<tr>\n<td>Max product length<\/td>\n<td><strong>3,000 mm<\/strong> (<em>as quoted<\/em>)<\/td>\n<td>No hard limit; ergonomic limit<\/td>\n<\/tr>\n<tr>\n<td>Max product width<\/td>\n<td><strong>800 mm<\/strong> (<em>as quoted<\/em>)<\/td>\n<td>No hard limit<\/td>\n<\/tr>\n<tr>\n<td>Max product thickness<\/td>\n<td><strong>120 mm<\/strong> (<em>as quoted<\/em>)<\/td>\n<td>No hard limit<\/td>\n<\/tr>\n<tr>\n<td>Max product weight<\/td>\n<td><strong>10 kg<\/strong> (<em>as quoted<\/em>)<\/td>\n<td>Limited by worker strength<\/td>\n<\/tr>\n<tr>\n<td>Labor per shift<\/td>\n<td><strong>1 operator<\/strong> (<em>estimated<\/em>)<\/td>\n<td><strong>2\u20133 workers<\/strong> (<em>estimated<\/em> typical)<\/td>\n<\/tr>\n<tr>\n<td>Throughput<\/td>\n<td>High; fixed PLC cycle (<em>as designed<\/em>)<\/td>\n<td>Low; operator-dependent<\/td>\n<\/tr>\n<tr>\n<td>Film consumption<\/td>\n<td><strong>30\u201350% less film<\/strong> (<em>estimated<\/em>, rule-of-thumb)<\/td>\n<td>30\u201350% more film (<em>estimated<\/em>, inverse)<\/td>\n<\/tr>\n<tr>\n<td>Wrap consistency<\/td>\n<td>Repeatable PLC-controlled geometry (<em>as designed<\/em>)<\/td>\n<td>Varies by worker and shift<\/td>\n<\/tr>\n<tr>\n<td>Power \/ air needs<\/td>\n<td><strong>Unconfirmed \u2014 request datasheet<\/strong><\/td>\n<td>None for manual operation<\/td>\n<\/tr>\n<tr>\n<td>Warranty \/ training<\/td>\n<td><strong>Unconfirmed \u2014 request in writing<\/strong><\/td>\n<td>Not applicable<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>Key Point: three decision drivers dominate.<\/strong> First, envelope fit \u2014 the E-1200 is hard-limited at <strong>3,000 \u00d7 800 \u00d7 120 mm, 10 kg<\/strong> (<em>as quoted<\/em>). Second, throughput \u2014 validate your volume against the <strong>50\u2013100 pieces\/day<\/strong> automation threshold (<em>estimated<\/em>). Third, confirmed scope \u2014 until the supplier confirms technical data, warranty, and delivery terms in writing, both price lines remain preliminary.<\/p>\n<h2>\u2699\ufe0f Selection Advice<\/h2>\n<p><strong>Select the automatic E-1200 when your verified daily output exceeds roughly 50 pieces, when labor cost per shift is significant, or when customers mandate consistent export-grade wrapping. Choose manual wrapping only for low volume, highly irregular products, or when the equipment cannot achieve payback within 18 months.<\/strong><\/p>\n<p><strong>Step 1 \u2014 Verify the envelope fit.<\/strong> Measure your largest actual product: length \u2264 <strong>3,000 mm<\/strong>, width \u2264 <strong>800 mm<\/strong>, thickness \u2264 <strong>120 mm<\/strong>, weight \u2264 <strong>10 kg<\/strong> (<em>as quoted<\/em>). Any failure means the quoted ring cannot accept it; ask the supplier for specifications and pricing on larger-diameter ring models.<\/p>\n<p><strong>Step 2 \u2014 Measure throughput empirically.<\/strong> Run a timed one-hour manual wrapping trial on your longest product, then extrapolate across your full shift pattern. The <strong>50\u2013100 pieces\/day<\/strong> automation threshold is an industry rule-of-thumb (<em>estimated<\/em>), not a supplier guarantee \u2014 your trial data is the deciding evidence.<\/p>\n<p><strong>Step 3 \u2014 Model labor and film costs.<\/strong> Compare 12 months of wages for <strong>2\u20133 manual wrappers<\/strong>, plus the <strong>estimated 30\u201350% film consumption advantage<\/strong> of machine-controlled tension, against the <strong>CIF price of USD 1,286<\/strong> (<em>as quoted<\/em>) plus installation, operator training, power connection, and spare parts.<\/p>\n<p><strong>Step 4 \u2014 Confirm pending technical items in writing.<\/strong> Request from the supplier: the complete technical datasheet, electrical voltage\/frequency specifications, compressed air consumption, production lead time, warranty terms, recommended spare parts list, installation and training plan, and CE declaration of conformity with safety documentation per ISO 12100. None of these are confirmed in the source correspondence.<\/p>\n<p><strong>Step 5 \u2014 Decide on payback.<\/strong> If envelope fit, throughput, and payback all pass, purchase the automatic E-1200. If modelled payback exceeds 18 months, start with the manual line and revisit automation when volume grows.<\/p>\n<h2>\ud83d\udee0\ufe0f Purchase-Decision Checklist<\/h2>\n<p><strong>Work through this checklist sequentially before issuing a purchase order; each unchecked item is a risk that the E-1200 will not perform at your site, fail to arrive on schedule, or require unplanned utilities. Mark every line pass or fail against your own plant conditions.<\/strong><\/p>\n<ul>\n<li>\n<p>[ ] Product envelope verified: \u2264 3,000 mm length, \u2264 800 mm width, \u2264 120 mm thickness, \u2264 10 kg (<em>as quoted<\/em>)<\/p>\n<\/li>\n<li>\n<p>[ ] Daily wrapped volume verified by timed trial (industry threshold: 50\u2013100 pieces\/day, <em>estimated<\/em>)<\/p>\n<\/li>\n<li>\n<p>[ ] Written confirmation that FOB USD 780 \/ CIF USD 1,286 covers machine + both conveyors + PLC controls<\/p>\n<\/li>\n<li>\n<p>[ ] Complete technical specification sheet received (electrical, air, dimensions, cycle time)<\/p>\n<\/li>\n<li>\n<p>[ ] Production lead time confirmed in writing<\/p>\n<\/li>\n<li>\n<p>[ ] Warranty period and terms confirmed in writing<\/p>\n<\/li>\n<li>\n<p>[ ] Recommended spare parts list received<\/p>\n<\/li>\n<li>\n<p>[ ] Electrical supply (voltage\/frequency) matches plant capabilities<\/p>\n<\/li>\n<li>\n<p>[ ] Compressed air demand within existing compressor capacity<\/p>\n<\/li>\n<li>\n<p>[ ] CE declaration of conformity and ISO 12100 safety documentation received<\/p>\n<\/li>\n<li>\n<p>[ ] Installation, commissioning, and operator training plan agreed<\/p>\n<\/li>\n<\/ul>\n<h2>\ud83c\udfd7\ufe0f FAQ<\/h2>\n<p><strong>The following four questions address the most frequent procurement errors in this comparison: the legal scope of FOB versus CIF prices, envelope limits for long products, options for oversized products, and the legitimate conditions under which manual wrapping remains the right choice.<\/strong><\/p>\n<p><strong>What is the difference between FOB and CIF in this quotation?<\/strong>\nUnder <strong>Incoterms 2020<\/strong>, <strong>FOB (Free On Board)<\/strong> at USD 780 (<em>as quoted<\/em>) covers the machine cost delivered and loaded on the vessel at the origin port. <strong>CIF (Cost, Insurance, Freight)<\/strong> at USD 1,286 (<em>as quoted<\/em>) additionally covers freight and marine insurance to Misrata, Libya. CIF gives a fixed cost at the destination port; FOB leaves freight and insurance arrangement to you.<\/p>\n<p><strong>Does the E-1200 handle products longer than 3,000 mm?<\/strong>\nNot in the quoted configuration. The supplier quotation specifies a maximum product length of <strong>3,000 mm<\/strong> (<em>as quoted<\/em>). Longer products require a larger-diameter orbital ring \u2014 request alternative ring sizes and pricing directly from the supplier, since no larger model specification appears in the source document.<\/p>\n<p><strong>What if my product is wider than 800 mm or thicker than 120 mm?<\/strong>\nIt will not pass through the quoted orbital ring. Two options exist: obtain pricing and specifications for a larger ring model from the supplier&#8217;s range, or change product orientation during wrapping so that width and thickness both fit within the <strong>800 mm \u00d7 120 mm<\/strong> envelope.<\/p>\n<p><strong>Is manual wrapping ever the better choice?<\/strong>\nYes. Below roughly <strong>50 pieces per day<\/strong> (<em>estimated<\/em>), with frequently changing product geometry, or when no capital budget exists, manual wrapping is the rational baseline. Above that threshold, the automatic E-1200 offers measurable advantages in labor reduction, film conservation, and wrap consistency \u2014 based on industry rule-of-thumb estimates, pending confirmation from the supplier&#8217;s technical documentation and your own plant trial data.<\/p>","protected":false},"excerpt":{"rendered":"<p>Caveat: All supplier-attributed prices, dimensions, and configuration details in this analysis derive from the source quotation dated July 7th and are pending written confirmation. Values marked as quoted originate from that document; values marked estimated are industry rule-of-thumb benchmarks, not measured field data. Obtain the full quotation document and technical datasheet before issuing a purchase [&hellip;]<\/p>","protected":false},"author":1,"featured_media":17420,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","fifu_image_url":"https:\/\/www.fhopepack.com\/blog\/wp-content\/uploads\/2025\/07\/door-packing-machine3.webp","fifu_image_alt":"","footnotes":""},"categories":[1405],"tags":[],"class_list":["post-17416","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-door-wrapping-machine-stretch-wrapper"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/posts\/17416","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/comments?post=17416"}],"version-history":[{"count":2,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/posts\/17416\/revisions"}],"predecessor-version":[{"id":17421,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/posts\/17416\/revisions\/17421"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/media\/17420"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/media?parent=17416"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/categories?post=17416"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/tags?post=17416"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}