{"id":16893,"date":"2026-06-08T17:22:18","date_gmt":"2026-06-08T09:22:18","guid":{"rendered":"https:\/\/www.fhopepack.com\/zh\/?p=16893"},"modified":"2026-06-08T17:22:18","modified_gmt":"2026-06-08T09:22:18","slug":"what-is-a-pallet-inverter-180-degree-for-new-pallet-changer","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/zh\/what-is-a-pallet-inverter-180-degree-for-new-pallet-changer\/","title":{"rendered":"What is a Pallet inverter 180 degree for new pallet changer ?"},"content":{"rendered":"<blockquote>\n<p><strong>Specifications are from the manufacturer and may vary. Always verify with your supplier before purchasing.<\/strong><\/p>\n<\/blockquote>\n<h2>\ud83d\udee0\ufe0f What is a Pallet Inverter 180 Degree?<\/h2>\n<iframe width=\"100%\" height=\"420\" src=\"https:\/\/www.youtube.com\/embed\/SC2uvNbWElE?rel=0\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen><\/iframe>\n<p><strong><a href=\"https:\/\/www.fhopepack.com\/pallet-inverter\/\">A 180\u2011degree pallet inverter <\/a>is a hydraulic machine that rotates a loaded pallet exactly 180\u00b0\u2014turning the bottom face to the top\u2014allowing damaged pallet replacement or product inspection without manual re\u2011handling. The FPFZ\u201102 model from the manufacturer accomplishes this in roughly 50 seconds using a dead\u2011weight fixed mode that relies on the load\u2019s own mass for clamping, eliminating the need for straps or clamps for most stable loads. This design is widely used as the core unit in automated new pallet changer systems.<\/strong><\/p>\n<p>The machine accepts standard wood, plastic, or metal pallets with a base footprint up to <strong>1200\u202fmm \u00d7 1200\u202fmm<\/strong> and a load height that can range from <strong>1000\u202fmm to 1800\u202fmm<\/strong>. The maximum pallet weight (product included) is rated at <strong>2000\u202fkg<\/strong>, while the turnover capacity is conservatively set at <strong>2.5\u202fT<\/strong> to provide a safety margin. The FPFZ\u201102\u2019s full 180\u00b0 rotation distinguishes it from tilters that only tip loads 90\u00b0 or 135\u00b0, making it suitable for complete bottom\u2011access tasks such as pallet exchange or bottom\u2011layer inspection.<\/p>\n<h3>How Does a 180\u2011Degree Inverter Work in a New Pallet Changer System?<\/h3>\n<p>In a typical workflow, the inverter clamps the loaded pallet using its own weight against a fixed clamping frame, lifts it slightly, rotates 180\u00b0, then lowers the load onto a fresh pallet placed underneath. According to the manufacturer\u2019s operational description, the operator loads the pallet, presses a button on the supplied wireless remote or panel, and the FPFZ\u201102 completes the turn in <strong>\u2248\u202f50 seconds<\/strong>. After flipping, the original (now top) pallet can be removed for repair or disposal, and a new pallet is inserted into the empty lower position. The machine can then reverse\u2011rotate to place the load onto the new pallet. This cycle eliminates manual lifting and reduces product damage risk\u2014critical for high\u2011throughput warehouses and distribution centers.<\/p>\n<h2>\ud83c\udfd7\ufe0f What are the Key Specifications of the FPFZ\u201102 Model?<\/h2>\n<p><strong>The key specifications of the FPFZ\u201102 are defined by the manufacturer\u2019s datasheet and include a machine footprint of 2488\u202fmm \u00d7 2358\u202fmm \u00d7 2200\u202fmm, a 2.5\u202fT turnover capacity, and a 7.5\u202fkW hydraulic motor powered by 380\u202fV, 50\/60\u202fHz, 3\u2011phase supply. The table below lists all verified parameters as per the manufacturer\u2019s documentation. Pallet standards such as GMA (48\u202f\u00d7\u202f40\u202fin) and EUR (800\u202f\u00d7\u202f1200\u202fmm) fall within the machine\u2019s maximum dimensions, so compliance is straightforward for common industrial pallet types.<\/strong><\/p>\n<table>\n<thead>\n<tr>\n<th>Parameter<\/th>\n<th>Value (from manufacturer\u2019s datasheet)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Machine dimensions (L\u00d7W\u00d7H)<\/td>\n<td>2488\u202f\u00d7\u202f2358\u202f\u00d7\u202f2200\u202fmm<\/td>\n<\/tr>\n<tr>\n<td>Max pallet length<\/td>\n<td>1200\u202fmm<\/td>\n<\/tr>\n<tr>\n<td>Max pallet width<\/td>\n<td>1200\u202fmm<\/td>\n<\/tr>\n<tr>\n<td>Max load height<\/td>\n<td>1800\u202fmm<\/td>\n<\/tr>\n<tr>\n<td>Max pallet weight (load + pallet)<\/td>\n<td>2000\u202fkg<\/td>\n<\/tr>\n<tr>\n<td>Turnover capacity<\/td>\n<td><strong>2.5\u202fT<\/strong><\/td>\n<\/tr>\n<tr>\n<td>Turnover time<\/td>\n<td><strong>\u2248\u202f50\u202fs<\/strong><\/td>\n<\/tr>\n<tr>\n<td>Turnover angle<\/td>\n<td><strong>180\u00b0<\/strong><\/td>\n<\/tr>\n<tr>\n<td>Body base material<\/td>\n<td>Profile welding (A3 steel)<\/td>\n<\/tr>\n<tr>\n<td>Fixed mode<\/td>\n<td>Dead weight (no external clamps)<\/td>\n<\/tr>\n<tr>\n<td>Control interface<\/td>\n<td>Panel control + wireless remote<\/td>\n<\/tr>\n<tr>\n<td>Motor power<\/td>\n<td><strong>7.5\u202fkW<\/strong><\/td>\n<\/tr>\n<tr>\n<td>Electrical supply<\/td>\n<td><strong>380\u202fV, 50\/60\u202fHz, 3\u2011phase<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>These specifications enable the machine to handle GMA (48\u202f\u00d7\u202f40\u202fin) and EUR (800\u202f\u00d7\u202f1200\u202fmm) pallets without modification. The 2.5\u202fT turnover capacity provides a <strong>25% safety margin<\/strong> above the 2000\u202fkg pallet weight limit, as recommended by standard industrial practice for hydraulic equipment.<\/p>\n<h3>How Does Turnover Time Affect Throughput?<\/h3>\n<p>The FPFZ\u201102\u2019s nominal turnover time of <strong>\u2248\u202f50 seconds<\/strong> per cycle means each pallet exchange takes roughly one minute including load\/unload time. At normal operator pacing, this yields <strong>50\u201360 pallets per hour<\/strong>. For light\u2011duty repair or inspection stations this rate is adequate; however, for high\u2011volume lines (e.g., major distribution centers handling 100+ pallets per hour), a faster hydraulic system with a 30\u2011second cycle or an integrated conveyor interface would be required. The 50\u2011s benchmark from the datasheet serves as a reliable baseline for capacity planning.<\/p>\n<h2>\ud83d\udcc8 What are the Hydraulic and Electrical Components in the FPFZ\u201102?<\/h2>\n<p><strong>The FPFZ\u201102 uses components from brands like Schneider Electric (for electrical controls), Shanghai Ben\u202fMa (hydraulic motor), and Hydor (solenoid valves). These are proven industrial brands that offer reliable performance for the machine\u2019s intermittent duty cycle of 7.5\u202fkW. The specific component list from the manufacturer is as follows:<\/strong><\/p>\n<ul>\n<li>\n<p><strong>Hydraulic motor<\/strong> \u2013 Shanghai Ben\u202fMa (domestic Chinese brand, widely used in material handling)<\/p>\n<\/li>\n<li>\n<p><strong>Gear pump<\/strong> \u2013 Daojin (Tianjin)<\/p>\n<\/li>\n<li>\n<p><strong>Solenoid valve<\/strong> \u2013 Hydor<\/p>\n<\/li>\n<li>\n<p><strong>Main circuit breaker<\/strong> \u2013 Schneider Electric<\/p>\n<\/li>\n<li>\n<p><strong>AC contactor<\/strong> \u2013 Schneider Electric<\/p>\n<\/li>\n<li>\n<p><strong>Relay<\/strong> \u2013 Schneider Electric<\/p>\n<\/li>\n<li>\n<p><strong>Control switches<\/strong> \u2013 Schneider Electric<\/p>\n<\/li>\n<\/ul>\n<p>Schneider\u2019s electrical components are common in global industrial controls, ensuring availability of spares and compliance with most national electrical codes. The hydraulic motor and pump are domestically sourced from established Chinese manufacturers with a track record for this specific application. If your facility requires specific certifications (e.g., UL, CE, ATEX), confirm with the supplier whether alternatives can be substituted.<\/p>\n<h2>\ud83d\udee1\ufe0f What Should I Check When Choosing a 180\u2011Degree Pallet Inverter?<\/h2>\n<p><strong>When choosing a 180\u2011degree pallet inverter, verify the following points to ensure the machine matches your load envelope, power supply, and operational requirements:<\/strong><\/p>\n<ol>\n<li>\n<p><strong>Load weight and size<\/strong> \u2013 Confirm your heaviest pallet does not exceed <strong>2000\u202fkg<\/strong> and its dimensions fit within the <strong>1200\u202fmm \u00d7 1200\u202fmm<\/strong> base. For non\u2011standard sizes (e.g., 1000\u202f\u00d7\u202f1200\u202fmm EUR), confirm with the manufacturer\u2019s datasheet.<\/p>\n<\/li>\n<li>\n<p><strong>Footprint and clearance<\/strong> \u2013 The FPFZ\u201102 requires <strong>2488\u202fmm\u202f\u00d7\u202f2358\u202fmm<\/strong> floor space. Add <strong>500\u202fmm on all sides<\/strong> for safe operation, maintenance, and emergency access.<\/p>\n<\/li>\n<li>\n<p><strong>Power supply compatibility<\/strong> \u2013 The machine is wired for <strong>380\u202fV, 50\/60\u202fHz, 3\u2011phase<\/strong>. If your facility uses 440\u202fV or 220\u202fV, a transformer or motor change may be necessary; ask the supplier if a voltage variant is available.<\/p>\n<\/li>\n<li>\n<p><strong>Control preference<\/strong> \u2013 The standard package includes both a wireless remote and a fixed panel; decide if you need both or only one.<\/p>\n<\/li>\n<li>\n<p><strong>Optional upgrades<\/strong> \u2013 Some manufacturers offer automatic clamping, conveyor integration, or custom voltage. Inquire about availability for the FPFZ\u201102.<\/p>\n<\/li>\n<\/ol>\n<p>For a broader selection of stationary and automated models, visit the manufacturer\u2019s product page {d.link1}.<\/p>\n<h2>\u2699\ufe0f Selection Checklist for a 180\u2011Degree Pallet Inverter<\/h2>\n<p><strong>When evaluating a 180\u2011degree pallet inverter for a new pallet changer system, verify load capacity, cycle time, power compatibility, and component brand quality. Prioritise a model that matches your pallet dimensions and allows room for safe operation. Use the checklist below to structure your procurement discussions.<\/strong><\/p>\n<ol>\n<li>\n<p><strong>Load envelope<\/strong> \u2013 Pallet length \u2264\u202f1200\u202fmm, width \u2264\u202f1200\u202fmm, height (including product) \u2264\u202f1800\u202fmm.<\/p>\n<\/li>\n<li>\n<p><strong>Weight limit<\/strong> \u2013 Ensure pallet + product \u2264\u202f2000\u202fkg; confirm turnover capacity \u2265\u202f2.5\u202fT to provide margin.<\/p>\n<\/li>\n<li>\n<p><strong>Cycle time<\/strong> \u2013 50\u202fs is standard; ask if a faster hydraulic system (e.g., 30\u202fs) is available for higher throughput needs.<\/p>\n<\/li>\n<li>\n<p><strong>Turnover angle<\/strong> \u2013 Confirm the machine delivers a full <strong>180\u00b0<\/strong> (not 90\u00b0 or 135\u00b0) for complete bottom access.<\/p>\n<\/li>\n<li>\n<p><strong>Power requirements<\/strong> \u2013 Verify facility has <strong>380\u202fV, 50\/60\u202fHz, 3\u2011phase<\/strong> supply, or discuss alternatives.<\/p>\n<\/li>\n<li>\n<p><strong>Control preference<\/strong> \u2013 Panel control and wireless remote are both standard on the FPFZ\u201102; ensure your operators can use either.<\/p>\n<\/li>\n<li>\n<p><strong>Component quality<\/strong> \u2013 Schneider electrics and domestic hydraulic parts offer good value. If your maintenance policy requires alternatives (e.g., Bosch, Danfoss), request a quote for substitution.<\/p>\n<\/li>\n<li>\n<p><strong>Footprint and access<\/strong> \u2013 Machine size is 2488\u202fmm\u202f\u00d7\u202f2358\u202fmm; allow 500\u202fmm clearance on sides for servicing.<\/p>\n<\/li>\n<li>\n<p><strong>Safety features<\/strong> \u2013 Dead\u2011weight fixed mode is inherently stable; verify emergency stop buttons are accessible and that the machine includes safety interlocks.<\/p>\n<\/li>\n<li>\n<p><strong>Warranty and support<\/strong> \u2013 Ask the supplier for lead time, spare parts availability, and on\u2011site training options.<\/p>\n<\/li>\n<\/ol>\n<blockquote>\n<p><strong>Tip:<\/strong> If you regularly handle loads over 1800\u202fmm height or non\u2011standard pallet dimensions, request a custom quotation. Many manufacturers, including the one at {d.link2}, can adjust clamp frame dimensions and hydraulic stroke accordingly.<\/p>\n<\/blockquote>\n<p>Use this checklist when discussing your application with a supplier to avoid mismatched equipment and costly modifications later.<\/p>\n<blockquote>\n<p>\ud83d\udee1\ufe0f <strong>Compliance Note<\/strong>: This equipment is designed to meet ISO and ASTM requirements. Verify with the manufacturer.<\/p>\n<\/blockquote>","protected":false},"excerpt":{"rendered":"<p>Specifications are from the manufacturer and may vary. Always verify with your supplier before purchasing. \ud83d\udee0\ufe0f What is a Pallet Inverter 180 Degree? A 180\u2011degree pallet inverter is a hydraulic machine that rotates a loaded pallet exactly 180\u00b0\u2014turning the bottom face to the top\u2014allowing damaged pallet replacement or product inspection without manual re\u2011handling. The FPFZ\u201102 [&hellip;]<\/p>","protected":false},"author":1,"featured_media":16905,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"","_seopress_titles_desc":"A 180\u2011degree pallet inverter is a hydraulic machine that rotates a loaded pallet exactly 180\u00b0\u2014turning the bottom face to the top\u2014allowing damaged pallet replacement or product inspection without manual re\u2011handling. The FPFZ\u201102 model from the manufacturer accomplishes this in roughly 50 seconds using a dead\u2011weight fixed mode that relies on the load\u2019s own mass for clamping, eliminating the need for straps or clamps for most stable loads. This design is widely used as the core unit in automated new pallet changer systems.","_seopress_robots_index":"","fifu_image_url":"https:\/\/www.fhopepack.com\/blog\/wp-content\/uploads\/2025\/02\/Pallet-changing-machine-outdoor-jpg.webp","fifu_image_alt":"","footnotes":""},"categories":[367],"tags":[],"class_list":["post-16893","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-pallet-inverter"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/posts\/16893","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/comments?post=16893"}],"version-history":[{"count":2,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/posts\/16893\/revisions"}],"predecessor-version":[{"id":16906,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/posts\/16893\/revisions\/16906"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/media\/16905"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/media?parent=16893"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/categories?post=16893"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/zh\/wp-json\/wp\/v2\/tags?post=16893"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}