{"id":702,"date":"2018-05-03T06:23:20","date_gmt":"2018-05-03T06:23:20","guid":{"rendered":"http:\/\/www.fhopepack.com\/videos\/?p=702"},"modified":"2026-09-02T03:20:33","modified_gmt":"2026-09-02T03:20:33","slug":"top-quality-upender-and-tilter-for-coil-mold","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/top-quality-upender-and-tilter-for-coil-mold\/","title":{"rendered":"Top Quality Upender and Tilter for Coil, Mold"},"content":{"rendered":"<blockquote>\n<p><strong>Executive summary<\/strong><\/p>\n<p>This factory clip demonstrates a <strong>loaded coil upender<\/strong>: a heavy <strong>orange flip arm<\/strong> on a <strong>green base<\/strong> turns a large silver-grey metal coil from <strong>horizontal to vertical<\/strong> \u2014 roughly a <strong>90\u00b0<\/strong> change. The machine works with a real coil on board, so you can see the actual motion, but the video shows <strong>no load capacity, cycle time, model, power, or safety certification<\/strong>. Use this clip to understand the upending motion, then confirm the ratings and guarding with the manufacturer.<\/p>\n<\/blockquote>\n<iframe loading=\"lazy\" width=\"940\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/TkKShaeWCW0\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<h2>Applications this machine suits<\/h2>\n<p>A coil upender exists to answer one handling problem: <strong>heavy coils arrive and store either horizontal or vertical, and the process on the other side needs the opposite orientation.<\/strong><\/p>\n<ul>\n<li><strong>Steel and aluminum service centers<\/strong> \u2014 coils stored flat (eye-to-the-wall) are stood up (eye-to-sky) before feeding a slitting line, press, or uncoiler.<\/li>\n<li><strong>Stamping and pressing plants<\/strong> \u2014 vertical coils feed directly into downstream equipment, so the upender acts as the orientation bridge between storage and process.<\/li>\n<li><strong>Metal processing lines<\/strong> \u2014 a single upender replaces the crane-and-tilt work that would otherwise be done by hand or with an unstable sling lift.<\/li>\n<\/ul>\n<p>The clip shows exactly this motion with a coil in place. For <strong>mold and die handling<\/strong> \u2014 the other type of load named in the article title \u2014 the tilt-to-access benefit is the same in principle, but the video does not demonstrate a mold, so that application must be confirmed separately.<\/p>\n<h2>What the video shows<\/h2>\n<p>The clip runs about <strong>59 seconds<\/strong> and is one continuous shot of the upending cycle. Timestamps below are approximate (29 frames sampled at 2-second intervals; frame N \u2248 (N\u22121) \u00d7 2 s).<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Phase<\/th>\n<th style=\"text-align: left\">Time<\/th>\n<th style=\"text-align: left\">What happens<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\"><strong>Ready (horizontal)<\/strong><\/td>\n<td style=\"text-align: left\">0\u20136 s<\/td>\n<td style=\"text-align: left\">A large silver-grey metal coil lies flat on the orange flip arm. A worker in a white hard hat and dark workwear stands at the green control cabinet.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Lifting<\/strong><\/td>\n<td style=\"text-align: left\">6\u201320 s<\/td>\n<td style=\"text-align: left\">The orange arm starts to rise. The coil tilts off horizontal; the visible angle increases to roughly 60\u00b0.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Nearing vertical<\/strong><\/td>\n<td style=\"text-align: left\">20\u201334 s<\/td>\n<td style=\"text-align: left\">The arm continues upward; the coil passes about 85\u00b0 and approaches vertical. The worker watches from the cabinet.<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Vertical (stable)<\/strong><\/td>\n<td style=\"text-align: left\">34\u201358 s<\/td>\n<td style=\"text-align: left\">The coil reaches the vertical position and holds there, secured by the fully extended arm. The shot ends with the load stable.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The core action is simple and easy to verify: <strong>the arm rotates the coil through an arc from flat to upright, and holds it at the end of the cycle.<\/strong> No tooling change, manual cranking, or operator force is involved in the shown motion.<\/p>\n<h2>Direct observation notes<\/h2>\n<p>These notes are taken directly from the video frames and describe what is visible, without interpretation.<\/p>\n<ul>\n<li><strong>Machine structure:<\/strong> an <strong>orange mechanical flip arm<\/strong> (the upending structure that carries the load) mounted on a <strong>green base<\/strong>. Heavy painted steel construction.<\/li>\n<li><strong>Control cabinet:<\/strong> a <strong>green cabinet<\/strong> stands beside the machine; an operator works at its panel. Button\/screen detail is not readable at this resolution.<\/li>\n<li><strong>Warning marking:<\/strong> <strong>yellow-and-black hazard stripes<\/strong> run around the base of the machine.<\/li>\n<li><strong>Workpiece:<\/strong> one <strong>large silver-grey metal coil<\/strong>, noticeably taller than the operator standing next to it.<\/li>\n<li><strong>Orientation change:<\/strong> the coil starts <strong>horizontal<\/strong> on the arm, tilts up through about <strong>60\u00b0<\/strong> then <strong>85\u00b0<\/strong>, and finishes <strong>vertical (90\u00b0)<\/strong>.<\/li>\n<li><strong>People:<\/strong> one operator in a white hard hat and dark workwear monitors the cycle from the control cabinet; a second person appears in the background.<\/li>\n<li><strong>No readable text:<\/strong> no brand, model plate, label, or watermark text could be read clearly in any frame.<\/li>\n<\/ul>\n<h2>What the video does not show<\/h2>\n<p>An upend cycle of roughly 59 seconds cannot establish the machine&#8217;s real-world limits. None of the following appear in the clip:<\/p>\n<ul>\n<li><strong>Rated load capacity<\/strong> \u2014 maximum coil or mold weight the machine can flip.<\/li>\n<li><strong>Coil dimensions<\/strong> \u2014 maximum diameter, width, or OD\/ID that the arm can cradle.<\/li>\n<li><strong>Cycle time<\/strong> \u2014 seconds per upend including loading and unloading, at your real coil size.<\/li>\n<li><strong>Drive type and power<\/strong> \u2014 mechanical (motor\/gearbox) vs hydraulic, and motor rating.<\/li>\n<li><strong>Model or brand<\/strong> \u2014 no readable plate or marking on the machine.<\/li>\n<li><strong>Safety features<\/strong> \u2014 no emergency stop, barrier fence, light curtain, or interlock is visible in the frame; only the yellow-black hazard stripes are present.<\/li>\n<li><strong>Mold\/die operation<\/strong> \u2014 despite the article title, no mold is handled in this clip.<\/li>\n<li><strong>Certifications<\/strong> \u2014 no CE, ISO, or equivalent mark is visible.<\/li>\n<\/ul>\n<p>These gaps are normal for short factory clips. They are function demonstrations, not specification sheets.<\/p>\n<h2>Machine structure breakdown<\/h2>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Component<\/th>\n<th style=\"text-align: left\">Observed in the video<\/th>\n<th style=\"text-align: left\">What it does<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\"><strong>Orange flip arm<\/strong><\/td>\n<td style=\"text-align: left\">Large arc-shaped arm, carries the load<\/td>\n<td style=\"text-align: left\">Rotates the coil from horizontal to vertical and back<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Green base<\/strong><\/td>\n<td style=\"text-align: left\">Supports the arm; sits on the floor<\/td>\n<td style=\"text-align: left\">Holds the pivot\/drive for the upending motion<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Green control cabinet<\/strong><\/td>\n<td style=\"text-align: left\">Separate cabinet beside the machine<\/td>\n<td style=\"text-align: left\">Houses the control panel used to start\/monitor the cycle<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Hazard stripes<\/strong><\/td>\n<td style=\"text-align: left\">Yellow-and-black band around the base<\/td>\n<td style=\"text-align: left\">Marks the machine&#8217;s operating zone<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The mechanism is essentially a <strong>rotating platform in cross-section<\/strong>: one end of the arm is the pivot; the other end cradles the coil and swings it through the arc. Because the coil is loaded during the whole clip, the arm demonstrably holds the load through the motion.<\/p>\n<h2>Fit criteria<\/h2>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Question<\/th>\n<th style=\"text-align: left\">If yes, check<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\">Do you need to turn coils from horizontal to vertical (or back) before a line?<\/td>\n<td style=\"text-align: left\">This is the core motion shown; confirm your coil size and weight against the rated range<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Is your load a coil destined for slitting, uncoiling, or pressing?<\/td>\n<td style=\"text-align: left\">Confirm OD\/ID, width, and weight against the machine&#8217;s capacity<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Do you also handle molds or dies that need tilting?<\/td>\n<td style=\"text-align: left\">The video does not show a mold; confirm a mold\/tilter configuration separately<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Is a loaded demonstration important to you?<\/td>\n<td style=\"text-align: left\">This clip is loaded; ask for a video at your specific coil size<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Do you need certified safety guarding?<\/td>\n<td style=\"text-align: left\">No E-stop, fence, or light curtain is visible; confirm the build you are quoted<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>What to verify with the manufacturer<\/h2>\n<p>Before you treat this machine as a candidate, get written answers to these items. None are shown in the video.<\/p>\n<ol>\n<li><strong>Load capacity<\/strong> \u2014 maximum coil\/mold weight the arm can lift and hold.<\/li>\n<li><strong>Load envelope<\/strong> \u2014 maximum coil diameter, width, and center-of-gravity offset.<\/li>\n<li><strong>Cycle time<\/strong> \u2014 seconds per upend at your load, including load\/unload.<\/li>\n<li><strong>Drive and power<\/strong> \u2014 mechanical vs hydraulic, and the motor or pump rating.<\/li>\n<li><strong>Safety package<\/strong> \u2014 emergency stop, guard fence, light curtain, and interlocks on the configuration you are quoted.<\/li>\n<li><strong>Mold option<\/strong> \u2014 whether a mold-handling or variable-angle tilter variant exists if you handle molds.<\/li>\n<\/ol>\n<h2>Frequently asked questions<\/h2>\n<p><strong>How does an upender differ from a tilter?<\/strong>\nAn upender typically turns a load a full 90\u00b0, from horizontal to vertical. A tilter may stop at a chosen angle (for example, 45\u00b0 for inspection or maintenance access). The line between the two is not standardized, so confirm the exact rotation arc of the machine you are quoted.<\/p>\n<p><strong>Does this machine rotate the coil 360\u00b0, or just 90\u00b0?<\/strong>\nThe clip shows roughly a 90\u00b0 arc \u2014 from flat to upright. Nothing in the video demonstrates continuous rotation, so treat it as a horizontal\u2194vertical re-orienting machine unless the manufacturer states otherwise.<\/p>\n<p><strong>Can the same machine handle molds or dies?<\/strong>\nThe clip handles a coil only. The tilting principle can apply to molds, but a mold needs a different cradle\/table and perhaps a variable stop angle. Ask for a dedicated mold configuration and a demonstration.<\/p>\n<p><strong>What safety is standard on this type of machine?<\/strong>\nTypical packages include an emergency stop, limit switches on the rotation, hazard guarding or light curtain, and (for hydraulic units) velocity fuses. In this clip only hazard stripes are visible, so confirm each safety item on your quotation.<\/p>\n<p><strong>Is this a mechanical-drive or hydraulic machine?<\/strong>\nNot stated in the video. Hydraulic drives are common for very heavy coils because they offer high force in a compact package; mechanical drives can give cleaner precision. This must be confirmed, not guessed.<\/p>\n<h2>Why it matters<\/h2>\n<p>Re-orienting a heavy coil is one of the riskier jobs on a processing floor. Lifting a vertical coil with chains and tilting it by hand puts people near a load that can shift, roll, or drop.<\/p>\n<p>An upender removes that manual step: the arm does the rotation in a controlled arc, the load stays seated in the cradle, and the worker monitors from the control cabinet \u2014 which is what the clip shows. The visible benefit here is <strong>motion control and keeping personnel at a distance during the turn<\/strong>. Any claim about cycle-speed gains or damage reduction should be quantified against your own coils and confirmed with the supplier, because the video does not provide those numbers.<\/p>\n<h2>Related reading<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fhopepack.com\/Coil_upender.html\">https:\/\/www.fhopepack.com\/Coil_upender.html<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/90-degree-coil-tilter-with-a-rotatable-base\/\">90 Degree Coil Tilter with a Rotatable Base<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/coil-tilter-with-rotary-base\/\">Coil Tilter with 180\u00b0 Rotary Base<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/hydraulic-coil-tilter-the-smart-fix-for-costly-coil-handling\/\">Hydraulic Coil Tilter: The Smart Fix for Costly Coil Handling<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/multipurpose-automatic-coil-tilter-with-slide-table\/\">Multipurpose &amp; Automatic Coil Tilter with Slide Table<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/steel-coil-tilter-with-customized-service\/\">Steel Coil Tilter with Customized Service<\/a><\/li>\n<\/ul>\n<h2>Source and method<\/h2>\n<p>This article is based on the embedded YouTube video (ID <code>TkKShaeWCW0<\/code>, roughly 59 seconds). <strong>29 frames were sampled at 2-second intervals<\/strong> and analyzed with a local vision-language model (Qwen3-VL). The video contains <strong>background music only and no narration<\/strong>, so all observations are visual; the two-second frame grid means timestamps are approximate and brief transitions between listed phases may not be individually captured.<\/p>\n<p>The direct observations come from what is visible in the frames; the applications, fit criteria, and buyer questions are clearly marked analysis and are intended as a starting point for a conversation with a qualified equipment supplier. Load capacity, cycle time, drive type, safety features, and certifications must be confirmed with the manufacturer before specification.<\/p>\n<h2>Next step<\/h2>\n<p>If you handle heavy coils \u2014 or molds that need safe tilting for maintenance \u2014 send your <strong>load type, weight, coil\/mold dimensions, and required rotation angle<\/strong> to the FHOPE sales team for a fit check against this upender\/tilter and for the missing specification data.\nUse the <a href=\"https:\/\/www.fhopepack.com\/videos\/contact-2\/\">contact page<\/a> to start the conversation.<\/p>\n<p><em>Last updated: 2026-09-02.<\/em><\/p>","protected":false},"excerpt":{"rendered":"<p>Executive summary This factory clip demonstrates a loaded coil upender: a heavy orange flip arm on a green base turns a large silver-grey metal coil from horizontal to vertical \u2014 roughly a 90\u00b0 change. The [&hellip;]<\/p>","protected":false},"author":1,"featured_media":2647,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Top Quality Upender and Tilter for Coil, Mold","_seopress_titles_desc":"See a loaded coil upender flip a metal coil from horizontal to vertical. What machines really do, and what to verify with the maker.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[{"_seopress_pro_rich_snippets_type":"none"}],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"default","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[194],"tags":[202,191,192],"class_list":["post-702","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-tilterupender","tag-steel-coil-upender","tag-tilter","tag-upender"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/702","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=702"}],"version-history":[{"count":7,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/702\/revisions"}],"predecessor-version":[{"id":14834,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/702\/revisions\/14834"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/2647"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=702"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=702"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=702"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}