{"id":65,"date":"2018-04-17T08:02:42","date_gmt":"2018-04-17T08:02:42","guid":{"rendered":"http:\/\/www.fhopepack.com\/videos\/?p=65"},"modified":"2026-10-26T15:00:56","modified_gmt":"2026-10-26T15:00:56","slug":"steel-coilwire-coil-wrapping-packing-machine-may-dong-goi-day-thep-cuon-va-cuon-day","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/steel-coilwire-coil-wrapping-packing-machine-may-dong-goi-day-thep-cuon-va-cuon-day\/","title":{"rendered":"Steel Strip Coil &#038; Wire Coil Wrapping Machine: FPS-300 vs FPW-300 Engineering Selection Guide"},"content":{"rendered":"<blockquote>\n<p><strong>Executive summary<\/strong><\/p>\n<p>An upright coil wrapping packing machine applies protective materials through the eye of a coil while the coil rotates vertically on motorized carrier rollers. Although steel strip coils and wire coils share an annular geometry, their differences in structural rigidity, core dimensions, weight distribution, and outer turn spring-back require distinct mechanical handling systems. The <strong>FPS-300<\/strong> is engineered for rigid, heavy slit steel strip coils (20\u20131,000 kg; 508\u2013610 mm ID), while the <strong>FPW-300<\/strong> is optimized for non-rigid, lighter wire coils (10\u2013250 kg; 300\u2013700 mm ID).<\/p>\n<iframe loading=\"lazy\" width=\"725\" height=\"408\" src=\"https:\/\/www.youtube.com\/embed\/hD_lbS49Uok\" title=\"Steel Coil&amp;wire coil  wrapping packing machine M\u00e1y \u0111\u00f3ng g\u00f3i d\u00e2y th\u00e9p cu\u1ed9n v\u00e0 cu\u1ed9n d\u00e2y\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<\/blockquote>\n<hr \/>\n<p>The FPS-series upright orbital coil packaging system secures cold-rolled slit coils and wire coils on heavy-duty, polyurethane-lagged carrier rollers. The high-speed shuttle ring rotates continuously through the coil eye, wrapping crepe paper, VCI film, or stretch film with constant mechanical tension. Complete with an integrated operator console, stack-light status indicators, and perimeter safety trip devices, the system eliminates coil marking while maintaining continuous throughput.<\/p>\n<h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ul>\n<li><a href=\"#strip-vs-wire\">Steel Strip Coil vs. Wire Coil: Structural &amp; Handling Differences<\/a><\/li>\n<li><a href=\"#how\">Kinematics: How the Upright Orbital Wrapper Operates<\/a><\/li>\n<li><a href=\"#specs\">Engineering Specifications: FPS-300 vs. FPW-300<\/a><\/li>\n<li><a href=\"#materials\">Protective Packaging Media: Paper, VCI Film, or Multi-Layer Wraps<\/a><\/li>\n<li><a href=\"#example\">Engineering Calculation: 880 kg Slit Strip Coil<\/a><\/li>\n<li><a href=\"#selection-checklist\">Pre-Commissioning Technical Checklist<\/a><\/li>\n<li><a href=\"#safety\">Safety Standards: EN 415-10 and ISO 12100 Compliance<\/a><\/li>\n<li><a href=\"#engineering-faq\">Engineering FAQ<\/a><\/li>\n<li><a href=\"#next-step\">Direct Technical Inquiry &amp; Proposal Generation<\/a><\/li>\n<li><a href=\"#related-reading\">Related Technical Documentation<\/a><\/li>\n<li><a href=\"#sources\">Reference Standards<\/a><\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"strip-vs-wire\">Steel Strip Coil vs. Wire Coil: Structural &amp; Handling Differences<\/h2>\n<p>Selecting between an FPS and an FPW orbital packaging machine requires evaluating the physical state of the coiled product. Slit strip coils and wire rod bundles exert fundamentally different loads on carrier rollers and shuttle rings:<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Critical Parameter<\/th>\n<th style=\"text-align: left\">Cold-Rolled Slit Steel Strip Coil<\/th>\n<th style=\"text-align: left\">Drawn Steel \/ Non-Ferrous Wire Coil<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\"><strong>Internal Diameter (ID)<\/strong><\/td>\n<td style=\"text-align: left\">Standardized mill bore: 508 mm or 610 mm<\/td>\n<td style=\"text-align: left\">Variable arbor bore: 300 mm to 700 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Structural Rigidity<\/strong><\/td>\n<td style=\"text-align: left\">Solid, tightly wound metal block<\/td>\n<td style=\"text-align: left\">Semi-rigid to loose bundling; susceptible to settling<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Turn Behavior<\/strong><\/td>\n<td style=\"text-align: left\">Fixed, sharp edge profiles; vulnerable to telescoping<\/td>\n<td style=\"text-align: left\">Elastic turns; prone to spring-back and strand loosening<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Surface Failure Risk<\/strong><\/td>\n<td style=\"text-align: left\">Transverse edge cracking, indentations, surface oxidation<\/td>\n<td style=\"text-align: left\">Inter-strand scuffing, friction fretting, trapped moisture<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Carrier Roller Profile<\/strong><\/td>\n<td style=\"text-align: left\">Dual cylindrical rollers with fixed radial support<\/td>\n<td style=\"text-align: left\">Dual rollers with deep lateral guide rollers to arrest splay<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Recommended Model<\/strong><\/td>\n<td style=\"text-align: left\"><strong>FPS-300<\/strong><\/td>\n<td style=\"text-align: left\"><strong>FPW-300<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>A cold-rolled slit coil behaves as a rigid, dense annular disc. The packaging machine must support high linear contact loads on the roller bed while protecting precision edges against shear marks.<\/p>\n<p>Conversely, a wire coil consists of multiple elastic loops bound with strapping. The packaging machine must support variable contact points, maintain radial cohesion, and prevent individual loops from shifting into the ring travel path during rotation.<\/p>\n<hr \/>\n<h2 id=\"how\">Kinematics: How the Upright Orbital Wrapper Operates<\/h2>\n<p>The machine executes a two-axis coordinated wrapping motion:<\/p>\n<ol>\n<li><strong>Primary Rotation (Orbital Ring)<\/strong>: The aluminum-cast orbital ring is driven by heavy-duty friction wheels or reinforced belts. It carries the packaging material spool through the central eye of the coil at controlled rotational speeds (\u03c9).<\/li>\n<li><strong>Secondary Rotation (Workpiece Drive)<\/strong>: Two polyurethane-coated carrier rollers support the coil on its outer diameter (OD), rotating it continuously around its horizontal axis.<\/li>\n<li><strong>Kinematic Coordination<\/strong>: As the coil indexes forward, the rotating ring applies spiral-wound wraps through the bore. The wrap overlap ratio is determined by the ratio of carrier roller surface speed to ring rotation speed.<\/li>\n<\/ol>\n<pre><code>       [ Orbital Shuttle Ring (Through Eye) ]\n                  \u2502       \u25b2\n                  \u25bc       \u2502\n           \u250c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2510\n           \u2502   Coil Eye    \u2502\n   \u25c4\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2524 (508-610 mm)  \u251c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u25ba  Horizontal Indexing Axis\n           \u2502               \u2502\n           \u2514\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u252c\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2518\n                   \u2502\n           [ Carrier Rollers ]  (Dual Polyurethane-Lagged Drive)<\/code><\/pre>\n<p>Vertical lift drives allow the entire mainframe ring assembly to be adjusted to align with the core center of different coil heights, preventing the film shuttle from striking the inner bore. Mechanical friction brakes or pneumatic dancer bars maintain constant tension across the wrapping film to prevent slack or edge necking.<\/p>\n<hr \/>\n<h2 id=\"specs\">Engineering Specifications: FPS-300 vs. FPW-300<\/h2>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Technical Specification<\/th>\n<th style=\"text-align: left\">FPS-300 (Slit Strip Coils)<\/th>\n<th style=\"text-align: left\">FPW-300 (Wire Coils &amp; Bundles)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\"><strong>Coil Internal Diameter (ID)<\/strong><\/td>\n<td style=\"text-align: left\">508\u2013610 mm<\/td>\n<td style=\"text-align: left\">300\u2013700 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Coil Outer Diameter (OD)<\/strong><\/td>\n<td style=\"text-align: left\">600\u20131,200 mm<\/td>\n<td style=\"text-align: left\">450\u2013850 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Coil Width \/ Height<\/strong><\/td>\n<td style=\"text-align: left\">100\u2013300 mm<\/td>\n<td style=\"text-align: left\">100\u2013300 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Maximum Payload Capacity<\/strong><\/td>\n<td style=\"text-align: left\">20\u20131,000 kg<\/td>\n<td style=\"text-align: left\">10\u2013250 kg<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Wrapping Material Overlap<\/strong><\/td>\n<td style=\"text-align: left\">10%\u201390% (Inverter-Controlled)<\/td>\n<td style=\"text-align: left\">10%\u201390% (Inverter-Controlled)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Compatible Packaging Media<\/strong><\/td>\n<td style=\"text-align: left\">Crepe paper, PE stretch film, VCI film, woven HDPE<\/td>\n<td style=\"text-align: left\">PE stretch film, PVC, woven tape, crepe paper<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Dispenser Roll Capacity<\/strong><\/td>\n<td style=\"text-align: left\">Core ID 50 mm; OD 100\u2013450 mm; Width 100\u2013150 mm<\/td>\n<td style=\"text-align: left\">Core ID 50 mm; OD 100\u2013250 mm; Width 100\u2013120 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Pneumatic Requirements<\/strong><\/td>\n<td style=\"text-align: left\">0.4\u20130.6 MPa (4\u20136 bar clean, dry plant air)<\/td>\n<td style=\"text-align: left\">0.4\u20130.6 MPa (confirmed per clamping options)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Installed Power<\/strong><\/td>\n<td style=\"text-align: left\">1.5 kW<\/td>\n<td style=\"text-align: left\">1.5 kW<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Standard Electrical Service<\/strong><\/td>\n<td style=\"text-align: left\">380V, 50 Hz, 3-Phase (Customized to 460V\/480V)<\/td>\n<td style=\"text-align: left\">380V, 50 Hz, 3-Phase (Customized to 460V\/480V)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<hr \/>\n<h2 id=\"materials\">Protective Packaging Media: Paper, VCI Film, or Multi-Layer Wraps<\/h2>\n<p>Selecting the correct wrapping material depends on storage conditions, shipping mode, and the metallurgic sensitivity of the coil:<\/p>\n<ul>\n<li><strong>Reinforced Crepe Paper (70\u2013120 GSM)<\/strong>: Provides structural padding over sharp slit edges and absorbs moisture condensation during warehouse transit.<\/li>\n<li><strong>LLDPE Stretch Film (25\u201335 \u00b5m)<\/strong>: High-elasticity moisture seal. Provides dust-proofing and weather resistance when wrapped with a minimum 50% overlap.<\/li>\n<li><strong>VCI (Vapor Corrosion Inhibitor) Film \/ Paper<\/strong>: Emits corrosion-inhibiting chemical vapors directly onto the steel surface, neutralizing atmospheric moisture for overseas ocean freight.<\/li>\n<li><strong>Dual-Layer Co-Wrapping<\/strong>: For maximum barrier defense, machines can be fitted with a dual-dispenser shuttle carriage that applies VCI paper and PE stretch film simultaneously in a single pass.<\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"example\">Engineering Calculation: 880 kg Slit Strip Coil<\/h2>\n<p>The following calculation evaluates the packing parameters for a prime slit carbon steel coil:<\/p>\n<ul>\n<li>Outer Diameter (OD): 1,100 mm (1.10 m)<\/li>\n<li>Inner Diameter (ID): 508 mm (0.508 m)<\/li>\n<li>Width (W): 150 mm (0.15 m)<\/li>\n<li>Steel Density (\u03c1): 7,850 kg\/m\u00b3<\/li>\n<li>Material: 150 mm wide crepe paper, set for 50% overlap at the outer circumference.<\/li>\n<\/ul>\n<pre><code>Cross-Sectional Face Area:\n  A_face = (&pi; \/ 4) &times; (OD&sup2; &minus; ID&sup2;)\n  A_face = (&pi; \/ 4) &times; (1.10&sup2; &minus; 0.508&sup2;) = (&pi; \/ 4) &times; (1.21 &minus; 0.258) &asymp; 0.748 m&sup2;\n\nTotal Coil Volume:\n  V = A_face &times; W = 0.748 m&sup2; &times; 0.15 m &asymp; 0.112 m&sup3;\n\nMass Verification:\n  M = V &times; &rho; = 0.112 m&sup3; &times; 7,850 kg\/m&sup3; &asymp; 879.2 kg (Nominal 880 kg)\n  Result: Fits the FPS-300 limit (1,000 kg). Exceeds the FPW-300 capacity (250 kg max).\n\nRadial Wall Thickness:\n  T_wall = (OD &minus; ID) \/ 2 = (1,100 mm &minus; 508 mm) \/ 2 = 296 mm\n\nAnnular Cross-Section Perimeter:\n  P_section = 2 &times; (T_wall + W) = 2 &times; (296 mm + 150 mm) = 892 mm (0.892 m)\n\nOuter Circumference:\n  C_outer = &pi; &times; OD = &pi; &times; 1,100 mm &asymp; 3,456 mm\n\nNumber of Wraps at 50% OD Overlap:\n  Linear advance per ring turn = 150 mm &times; (1 &minus; 0.50) = 75 mm\n  N_turns = C_outer \/ Advance = 3,456 mm \/ 75 mm &asymp; 46.08 &rarr; 46 turns\n\nTotal Required Material Length (Single Layer):\n  L_paper = N_turns &times; P_section = 46 &times; 0.892 m &asymp; 41.0 m (excluding lead\/tail tails)<\/code><\/pre>\n<h3>Overlap Differential at the Inner Core<\/h3>\n<p>The 50% overlap is established at the maximum outer diameter (1,100 mm). Because the core circumference is smaller:<\/p>\n<pre><code>Inner Circumference:\n  C_inner = &pi; &times; ID = &pi; &times; 508 mm &asymp; 1,596 mm\n\nLinear Advance per Turn at Inner Bore:\n  Advance_ID = 75 mm &times; (C_inner \/ C_outer) = 75 mm &times; (1,596 \/ 3,456) &asymp; 34.6 mm\n\nResulting Overlap Ratio at the Inner Eye:\n  Overlap_ID = (150 mm &minus; 34.6 mm) \/ 150 mm = 115.4 \/ 150 &asymp; 76.9% (~77%)<\/code><\/pre>\n<p><em>Engineering Consequence<\/em>: Wrap material builds up significantly inside the central eye. Ensure the central hole retains adequate open clearance for overhead C-hook or coil car unloader access.<\/p>\n<hr \/>\n<h2 id=\"selection-checklist\">Pre-Commissioning Technical Checklist<\/h2>\n<p>Verify these six plant parameters before completing the machine configuration:<\/p>\n<ol>\n<li><strong>Workpiece Class<\/strong>: Solid slit steel coil, galvanized strip, or loose\/bundled wire loops.<\/li>\n<li><strong>Dimension Range<\/strong>: Min\/max ID, OD, and axial width.<\/li>\n<li><strong>Coil Mass Envelope<\/strong>: Minimum and maximum weight per unit (kg).<\/li>\n<li><strong>Protective Layer Profile<\/strong>: Single-layer stretch film, woven plastic cloth, or dual-layer paper + PE film.<\/li>\n<li><strong>Cycle Time Requirements<\/strong>: Total target coils per hour (determines required ring RPM and VFD indexing speeds).<\/li>\n<li><strong>Integration Interface<\/strong>: Manual crane loading, coil tilter integration, or powered indexing conveyor linkage.<\/li>\n<\/ol>\n<hr \/>\n<h2 id=\"safety\">Safety Standards: EN 415-10 and ISO 12100 Compliance<\/h2>\n<p>The FPS and FPW series are engineered under <strong>EN 415-10<\/strong> (Safety of Packaging Machines: General Requirements) and <strong>ISO 12100:2010<\/strong> (Risk Assessment and Reduction):<\/p>\n<ul>\n<li><strong>In-Running Nip Point Isolation<\/strong>: Carrier-roller drive hubs and orbital ring tracks are isolated behind safety interlocks with mechanical limit switches.<\/li>\n<li><strong>Operator E-Stop Circuit<\/strong>: Monitored dual-channel category-4 E-stop buttons are mounted on the main electrical console and on the machine frame.<\/li>\n<li><strong>Entanglement Protection<\/strong>: The rotating orbital zone is rated for strict entanglement zone isolation; light curtains or fixed interlocking perimeter fencing prevent machine start during coil positioning.<\/li>\n<li><strong>Roll-Off Restraints<\/strong>: Pneumatically actuated side-guide rollers prevent narrow, tall slit coils from tipping laterally on the carrier rollers during acceleration.<\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"engineering-faq\">Engineering FAQ<\/h2>\n<p><strong>Q: Can one machine wrap both steel strip coils and wire coils?<\/strong>\nA: Only if both product ranges fit within a single model&#8217;s envelope. Heavy slit coils (508 mm core, up to 1,000 kg) require the heavy roller beds and frame of the FPS-300. Light wire bundles (300\u2013700 mm ID, up to 250 kg) operate efficiently on the FPW-300. Cross-running is mechanically limited by minimum core clearance and roller payload capacity.<\/p>\n<p><strong>Q: Why use polyurethane covering on carrier and guide rollers?<\/strong>\nA: Polyurethane (typically 85\u201390 Shore A durometer) delivers a high coefficient of friction to rotate the coil without slip while preventing contact marks or edge indentation on critical cold-rolled, polished, or galvanized surfaces.<\/p>\n<p><strong>Q: What compressed air supply is required for pneumatic tensioning?<\/strong>\nA: Clean, dried plant air at 0.4\u20130.6 MPa (4\u20136 bar). Air powers the pneumatic film-cut clamp and the lateral stabilization rollers.<\/p>\n<p><strong>Q: Can paper and stretch film be applied simultaneously?<\/strong>\nA: Yes. An optional dual-material dispenser carriage mounts both a paper reel and a film roll on the orbital ring, applying a composite protective shell in a single operational cycle.<\/p>\n<hr \/>\n<h2 id=\"next-step\">Direct Technical Inquiry &amp; Proposal Generation<\/h2>\n<ol>\n<li><strong>Send Technical Parameters<\/strong>: Email your minimum\/maximum coil ID, OD, width, weight, and target cycle time to <code>info@fhopepack.com<\/code>.<\/li>\n<li><strong>Engineering Review<\/strong>: Our mechanical engineering team verifies ring clearance, drive torque, roller-bed spacing, and material overlaps.<\/li>\n<li><strong>Formal Proposal<\/strong>: Receive a full dimensional layout drawing, mechanical quotation, and electrical schematic within 24 hours.<\/li>\n<\/ol>\n<hr \/>\n<h2 id=\"related-reading\">Related Technical Documentation<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fhopepack.com\/Steel-coil-wrapping-machine\/Steel-coil-wrapping-machine-FPS-300.html\">FPS-300 Steel Strip Coil Wrapping Machine (Detailed Product Specifications)<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Wire-coil-wrapping-machine\/Wire-coil-wrapping-machine-FPW-300.html\">FPW-300 Industrial Wire Coil Wrapping Machine (Detailed Product Specifications)<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/wire-wrapping-machine-for-steel-wire-or-copper-wire\/\">Application Video: Wire Wrapping Machine for Steel Wire or Copper Wire<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/how-to-choose-the-coil-wrapping-machine-per-your-steel-wire-coil\/\">Engineering Guide: How to Select the Ideal Coil Wrapping Machine per Steel Wire Geometry<\/a><\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"sources\">Reference Standards<\/h2>\n<ul>\n<li>FHOPE Packaging Machinery Mechanical Documentation: FPS-300 &amp; FPW-300 Series Technical Specifications<\/li>\n<li><strong>EN 415-10:2014<\/strong>: Safety of packaging machines \u2014 Part 10: General requirements<\/li>\n<li><strong>ISO 12100:2010<\/strong>: Safety of machinery \u2014 General principles for design \u2014 Risk assessment and risk reduction<\/li>\n<li>Steel Packaging Technical Association: Best Practice Guide for Cold-Rolled Strip &amp; Wire Rod Corrosion Prevention<\/li>\n<\/ul>\n<p><strong>Last reviewed:<\/strong> 2026-10-19<\/p>\n<p><strong>Author:<\/strong> Packaging Systems Engineering Group, FHOPE<\/p>","protected":false},"excerpt":{"rendered":"<p>Ring type coil wrapping machine for steel coils and wire coils. OD 700-1600mm, 20-30 coils\/hour. VCI paper or stretch film wrapping. Get quote from FHOPE.<\/p>","protected":false},"author":1,"featured_media":2549,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Steel Coil & Wire Coil Wrapping Packing Machine | FHOPE","_seopress_titles_desc":"Steel strip coils and wire coils need different wrappers. FPS-300 and FPW-300 data side by side, paper or film choice and an 880 kg strip coil example.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[{"_seopress_pro_rich_snippets_type":"none"}],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"default","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[13],"tags":[19,20],"class_list":["post-65","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-steel-coil-wrapping-machine-copper-coil-packing-machine","tag-steel-coil","tag-wire-coil"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/65","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=65"}],"version-history":[{"count":19,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/65\/revisions"}],"predecessor-version":[{"id":17683,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/65\/revisions\/17683"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/2549"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=65"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=65"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=65"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}