{"id":4347,"date":"2022-08-02T11:27:22","date_gmt":"2022-08-02T11:27:22","guid":{"rendered":"https:\/\/www.fhopepack.com\/videos\/?p=4347"},"modified":"2026-10-28T15:29:40","modified_gmt":"2026-10-28T15:29:40","slug":"automatic-aluminum-profile-tape-applicator-video","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/automatic-aluminum-profile-tape-applicator-video\/","title":{"rendered":"Aluminium Profile Film Applicator: Automatic Protective Film Cover"},"content":{"rendered":"<blockquote>\n<p><strong>Executive summary<\/strong>\nAn automatic aluminium profile film applicator covers the exposed functional faces of each extruded aluminium profile with protective film or adhesive tape directly downstream of the extrusion and finishing line.\nProfile length is actively monitored upon infeed, allowing the flying cutting head to pre-cut the protective film to exact profile dimensions under synchronized servo motor control [manufacturer rating].\nThe machine packages 10 to 12 pieces per minute for standard 6 m profiles, maintaining continuous line velocity and eliminating one full-time manual cutting operator [manufacturer rating].<\/p>\n<\/blockquote>\n<iframe loading=\"lazy\" width=\"940\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/TiStObkrxV0\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ul>\n<li><a href=\"#video\">What the machine does, in order<\/a><\/li>\n<li><a href=\"#cycle\">Cycle time<\/a><\/li>\n<li><a href=\"#how-it-works\">How the film applicator works<\/a><\/li>\n<li><a href=\"#specs\">Aluminium profile film applicator specifications<\/a><\/li>\n<li><a href=\"#takt\">Takt check<\/a><\/li>\n<li><a href=\"#selection-checklist\">Selection checklist for a film applicator<\/a><\/li>\n<li><a href=\"#safety\">Controls and safety<\/a><\/li>\n<li><a href=\"#engineering-faq\">Engineering FAQ<\/a><\/li>\n<li><a href=\"#next-step\">Next step<\/a><\/li>\n<li><a href=\"#related-reading\">Related reading<\/a><\/li>\n<li><a href=\"#sources\">Sources<\/a><\/li>\n<\/ul>\n<h2 id=\"video\">What the machine does, in order<\/h2>\n<p>The automatic film applicator processes profiles via a single, repeatable kinematic sequence designed to prevent surface scuffing during handling and transit:<\/p>\n<ol>\n<li><strong>Infeed.<\/strong> The bare aluminium profile advances from the upstream live roller conveyor into the guided machine infeed guide rollers.<\/li>\n<li><strong>Grip and feed.<\/strong> An overhead pneumatic press-down driving unit clamps the profile against driven base rollers, advancing it positively past the multi-head film dispensers.<\/li>\n<li><strong>Film pre-cut.<\/strong> Optical and rotary sensors read the leading profile edge, allowing the integrated film-cutting device to pre-cut the tape or film to exact profile length under servo positioning control.<\/li>\n<li><strong>Apply.<\/strong> Specially profiled polyurethane pressure rollers press the adhesive film evenly onto the target profile faces without trapped air pockets or surface shear.<\/li>\n<li><strong>Separate.<\/strong> An acceleration outfeed servo roller advances the fully covered profile at a differential line speed, separating it cleanly from trailing film tails and moving it toward the discharge stage.<\/li>\n<\/ol>\n<p>This continuous sequence repeats automatically profile by profile, with wrapped sections collecting downstream on the accumulation table for batch bundling.<\/p>\n<h2 id=\"cycle\">Cycle time<\/h2>\n<table>\n<thead>\n<tr>\n<th>Step<\/th>\n<th>Indicative duration<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Manual infeed of a profile<\/td>\n<td>about 6 s<\/td>\n<\/tr>\n<tr>\n<td>Profiles on the roller conveyor<\/td>\n<td>about 30 s<\/td>\n<\/tr>\n<tr>\n<td>Profiles running to the outfeed<\/td>\n<td>about 27 s<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>These conveyor transit figures represent typical material flow across the complete infeed\/outfeed handling conveyor layout. Individual machine cycle speeds are rated per single profile passing the application heads, with line parameters verified and finalized against customer layout constraints at quotation.<\/p>\n<h2 id=\"how-it-works\">How the film applicator works<\/h2>\n<p>Surface protection following extrusion, cooling, and stretching is a critical step in preserving mill-finished, anodized, or powder-coated aluminium profiles from transit abrasions. Conventional taping methods require two operators: one dedicated worker continuously positioning profiles at the infeed, and a second worker downstream manually trimming adhesive film between workpieces. This automated applicator mechanizes the feeding, taping, cutting, and spacing functions, saving one full-time operator [manufacturer rating].<\/p>\n<p>Acting as a direct technical upgrade to legacy film taping equipment, this machine provides a broader cross-sectional dimensional window and substantially elevated line output [manufacturer rating]. A press-down driving device provides constant overhead traction, moving profiles of varying geometry smoothly past multiple tape applicators simultaneously. As the workpiece enters, the automated cutting assembly verifies profile length and pre-cuts the protective film to size. Once applied, an outfeed servo acceleration system pulls the profile ahead, establishing clearance before delivery onto the discharge table.<\/p>\n<table>\n<thead>\n<tr>\n<th>Part<\/th>\n<th>What it does<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Infeed roller conveyor<\/td>\n<td>Carries bare profiles from extrusion storage into the applicator entry guide<\/td>\n<\/tr>\n<tr>\n<td>Press-down driving device<\/td>\n<td>Holds profile geometry firmly against driven rollers to prevent slippage<\/td>\n<\/tr>\n<tr>\n<td>Film cutting device<\/td>\n<td>Measures profile length on-the-fly and pre-cuts film under servo control<\/td>\n<\/tr>\n<tr>\n<td>Film applicators<\/td>\n<td>Applies and smooths surface film or tape across selected profile faces<\/td>\n<\/tr>\n<tr>\n<td>Servo outfeed drive<\/td>\n<td>Accelerates wrapped profiles to create separation gaps at the discharge<\/td>\n<\/tr>\n<tr>\n<td>Outfeed conveyor and gathering table<\/td>\n<td>Collects finished profiles for subsequent batch grouping and bundle wrapping<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Profiles transition automatically from the powered outfeed conveyor onto the passive collection table. By eliminating the downstream manual blade-cutting station, the line maintains consistent edge adherence while reducing operator exposure to open blades.<\/p>\n<h2 id=\"specs\">Aluminium profile film applicator specifications<\/h2>\n<p>The core mechanical and electrical envelope accommodates standard extrusion dies and industrial packaging dimensions. The machine is manufactured under ISO 9001 quality procedures, carries complete CE compliance, and is backed by a 2-year industrial warranty [manufacturer rating].<\/p>\n<table>\n<thead>\n<tr>\n<th>Film applicator<\/th>\n<th>Specification<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Machine size<\/td>\n<td>3,500 \u00d7 800 \u00d7 1,500 mm (L \u00d7 W \u00d7 H)<\/td>\n<\/tr>\n<tr>\n<td>Profile length<\/td>\n<td>3,000 to 7,500 mm<\/td>\n<\/tr>\n<tr>\n<td>Profile width<\/td>\n<td>10 to 200 mm<\/td>\n<\/tr>\n<tr>\n<td>Profile height<\/td>\n<td>10 to 150 mm<\/td>\n<\/tr>\n<tr>\n<td>Packing speed<\/td>\n<td>10 to 12 pieces per minute for 6 m profiles<\/td>\n<\/tr>\n<tr>\n<td>Total power<\/td>\n<td>6.75 kW<\/td>\n<\/tr>\n<tr>\n<td>Covering material<\/td>\n<td>Protective film or tape<\/td>\n<\/tr>\n<tr>\n<td>Film length<\/td>\n<td>Pre-cut to the measured profile length<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2 id=\"takt\">Takt check<\/h2>\n<p>Matching post-extrusion packaging to extrusion output is critical to avoid factory floor bottlenecks:<\/p>\n<ul>\n<li><strong>Target Line Output:<\/strong> 600 profiles of 6 m length per hour.<\/li>\n<li><strong>Line Takt Time:<\/strong> <code>3,600 &divide; 600 = 6 s<\/code> per profile.<\/li>\n<li><strong>Applicator Capacity:<\/strong> Running at 10 to 12 pieces per minute yields an effective cycle of 5 to 6 s per piece.<\/li>\n<\/ul>\n<p>Under baseline settings, the applicator matches continuous line velocity. At the minimum rated speed of 10 pieces per minute (6.0 s cycle), the unit operates with zero cycle-time spare margin. When extrusion outputs exceed 600 pieces per hour or when manual loading intervals fluctuate, our engineering team integrates an intermediate accumulation buffer conveyor at the infeed, enabling uninterrupted feeding without line starvation.<\/p>\n<h2 id=\"selection-checklist\">Selection checklist for a film applicator<\/h2>\n<ul>\n<li>Profile length, against 3,000 to 7,500 mm.<\/li>\n<li>Profile width and height, against 10 to 200 mm and 10 to 150 mm.<\/li>\n<li>Faces to cover, and film or tape for each face.<\/li>\n<li>Profiles per hour, against 10 to 12 pieces per minute.<\/li>\n<li>Space for the infeed conveyor, outfeed conveyor and gathering table.<\/li>\n<\/ul>\n<h2 id=\"safety\">Controls and safety<\/h2>\n<p>Manual feeding at the machine entry places operators in proximity to driven pinch rollers and the vertical press-down assembly. Designing out pinch points and nip hazards is central to plant safety compliance. Mechanical perimeter interlocks and fixed entry tunnel guarding ensure profiles feed cleanly from the powered conveyor without requiring hands to enter the drive envelope.<\/p>\n<p>Before clearing profile jams, replenishing tape\/film rolls, or opening perimeter access doors, operators must follow standardized Lockout\/Tagout (LOTO) protocols to isolate all kinetic and pneumatic power sources. The flying knife cutter and outfeed servo drives remain electrically disabled via redundant safety relays until all maintenance access panels are secured and reset.<\/p>\n<p>Equipment exported to European and global markets adheres strictly to ISO 12100 risk-assessment guidelines and the EN 415-10 safety standard governing packaging machinery, establishing interlock integrity, emergency-stop architecture, and guarding clearances.<\/p>\n<h2 id=\"engineering-faq\">Engineering FAQ<\/h2>\n<p><strong>Q: Which profile sizes does the applicator take?<\/strong>\nA: The standard chassis processes profile lengths from 3,000 to 7,500 mm, cross-sectional widths from 10 to 200 mm, and cross-sectional heights from 10 to 150 mm. This dimensional range represents a broader operating window compared to older single-format taping equipment [manufacturer rating].<\/p>\n<p><strong>Q: How fast does it pack?<\/strong>\nA: The applicator operates at a rated speed of 10 to 12 pieces per minute for standard 6 m aluminium profiles [manufacturer rating].<\/p>\n<p><strong>Q: How does it cut the film to length?<\/strong>\nA: An automated length-detection sensor reads the profile as it enters the chassis, enabling the cutter to pre-cut the tape or film to exact dimension in advance under closed-loop servo control [manufacturer rating]. A downstream differential servo drive then accelerates the wrapped profile to ensure clean piece separation without tearing film backing.<\/p>\n<h2 id=\"next-step\">Next step<\/h2>\n<p>We engineer and deliver an aluminium profile film applicator through a disciplined three-stage onboarding process:<\/p>\n<ol>\n<li><strong>Submit your layout drawing<\/strong> along with detailed profile cross-section drawings (CAD\/PDF), lengths, designated taping faces, and line production targets to <strong>info@fhopepack.com<\/strong>.<\/li>\n<li><strong>Receive a proposal within 48 hours<\/strong>, including tailored machine layout drawings, tape applicator head configuration, and verified line-speed calculations.<\/li>\n<li><strong>Book a site survey<\/strong> with our engineering team to inspect extrusion line transitions, available footprint for infeed\/outfeed accumulation, and infeed guarding interfaces.<\/li>\n<\/ol>\n<h2 id=\"related-reading\">Related reading<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fhopepack.com\/Aluminum\/aluminum-profile-applicator.html\">Automatic aluminium profile film applicator<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Aluminum\/Automatic-profile-taping-machine.html\">Automatic profile taping machine<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Aluminum_profile_packing_line.html\">Aluminium profile packing line<\/a><\/li>\n<\/ul>\n<h2 id=\"sources\">Sources<\/h2>\n<ul>\n<li>Machine specifications: <a href=\"https:\/\/www.fhopepack.com\/Aluminum\/aluminum-profile-applicator.html\">aluminium profile applicator product page<\/a><\/li>\n<li>Cycle durations: indicative line timings, confirmed at quote<\/li>\n<li>Machine in action: <a href=\"https:\/\/www.youtube.com\/watch?v=TiStObkrxV0\">our video on YouTube<\/a><\/li>\n<li>Standards scope: <a href=\"https:\/\/www.iso.org\/standard\/51528.html\">ISO 12100:2010<\/a>, <a href=\"https:\/\/www.nen.nl\/en\/nen-en-415-10-2014-en-191845\">EN 415-10:2014<\/a><\/li>\n<li>Manual-method reference: <a href=\"https:\/\/www.fhopepack.com\/Aluminum\/Automatic-profile-taping-machine.html\">Automatic profile taping machine<\/a><\/li>\n<\/ul>\n<p><strong>Last reviewed:<\/strong> 2026-10-05<\/p>","protected":false},"excerpt":{"rendered":"<p>Executive summary An automatic aluminium profile film applicator covers the exposed functional faces of each extruded aluminium profile with protective film or adhesive tape directly downstream of the extrusion and finishing line. Profile length is [&hellip;]<\/p>","protected":false},"author":1,"featured_media":4348,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Aluminium profile film applicator: automatic surface cover","_seopress_titles_desc":"How our aluminium profile film applicator covers profiles with protective film, with clip timing, specs, a takt check, a checklist and safety notes.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[{"_seopress_pro_rich_snippets_type":"custom","_seopress_pro_rich_snippets_custom":"<script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@graph\": [{\"@type\": \"FAQPage\", \"@id\": \"https:\/\/www.fhopepack.com\/videos\/automatic-aluminum-profile-tape-applicator-video\/#faq\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which profile sizes does the applicator take?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Lengths from 3,000 to 7,500 mm, widths from 10 to 200 mm and heights from 10 to 150 mm.\"}}, {\"@type\": \"Question\", \"name\": \"How fast does it pack?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"10 to 12 pieces per minute for 6 m profiles.\"}}, {\"@type\": \"Question\", \"name\": \"How does it cut the film to length?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It checks the length of each profile as it enters and pre-cuts the film to that length in advance. A servo drive then separates the packed profile at the outfeed.\"}}]}, {\"@type\": \"VideoObject\", \"@id\": \"https:\/\/www.fhopepack.com\/videos\/automatic-aluminum-profile-tape-applicator-video\/#video\", \"name\": \"Aluminium Profile Film Applicator: Automatic Protective Film Cover\", \"description\": \"An automatic aluminium profile film applicator covers the faces of each profile with protective film or tape after extrusion. Our clip, about 78 s long, shows a worker feeding profiles, a long roller conveyor and a finished profile with printed film on its sides.\", \"thumbnailUrl\": [\"https:\/\/i.ytimg.com\/vi\/TiStObkrxV0\/hqdefault.jpg\"], \"embedUrl\": \"https:\/\/www.youtube.com\/embed\/TiStObkrxV0\", \"contentUrl\": \"https:\/\/www.youtube.com\/watch?v=TiStObkrxV0\", \"uploadDate\": \"2022-03-30\", \"duration\": \"PT1M19S\"}]}<\/script>"}],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":{"4494":"1"},"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"default","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[378],"tags":[566,567],"class_list":["post-4347","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-strapping-machine","tag-aluminum-profile-tape-applicator","tag-aluminum-profile-tapping-machine"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/4347","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=4347"}],"version-history":[{"count":9,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/4347\/revisions"}],"predecessor-version":[{"id":17950,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/4347\/revisions\/17950"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/4348"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=4347"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=4347"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=4347"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}