{"id":4336,"date":"2022-07-20T13:38:52","date_gmt":"2022-07-20T13:38:52","guid":{"rendered":"https:\/\/www.fhopepack.com\/videos\/?p=4336"},"modified":"2026-10-28T15:29:34","modified_gmt":"2026-10-28T15:29:34","slug":"automatic-strapping-machine-for-panel-and-board","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/automatic-strapping-machine-for-panel-and-board\/","title":{"rendered":"Automatic Strapping Machine for Panel and Board"},"content":{"rendered":"<blockquote>\n<p><strong>Executive summary<\/strong>\nAn automatic strapping machine for panel and board stacks straps each bundle on the conveyor as one online section of a board packaging line.\nWe choose PET or PP strap by bundle weight, storage time and edge condition; a 1,200 \u00d7 600 mm bundle with two straps takes about 9.4 m of strap including a 20 % margin.\nFor an illustrative 40 bundles per hour the takt is 90 s, and each station is configured per project.<\/p>\n<\/blockquote>\n<iframe loading=\"lazy\" width=\"940\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/dU_oEsW6aaU\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ul>\n<li><a href=\"#video\">What the machine does, in order<\/a><\/li>\n<li><a href=\"#station\">The strapping station in a board line<\/a><\/li>\n<li><a href=\"#belt\">PET or PP strap: how we choose<\/a><\/li>\n<li><a href=\"#straps\">Strap length formula and strap spacing<\/a><\/li>\n<li><a href=\"#head\">The strapping head and the conveyor<\/a><\/li>\n<li><a href=\"#takt\">Bundle takt and line balance<\/a><\/li>\n<li><a href=\"#selection-checklist\">Selection checklist for a board strapping machine<\/a><\/li>\n<li><a href=\"#safety\">Controls and safety<\/a><\/li>\n<li><a href=\"#engineering-faq\">Engineering FAQ<\/a><\/li>\n<li><a href=\"#next-step\">Next step<\/a><\/li>\n<li><a href=\"#related-reading\">Related reading<\/a><\/li>\n<li><a href=\"#sources\">Sources<\/a><\/li>\n<\/ul>\n<h2 id=\"video\">What the machine does, in order<\/h2>\n<p>The strapping station operates in a continuous, automated single-station sequence:<\/p>\n<ol>\n<li><strong>Stack infeed and positioning<\/strong>: The incoming board bundle advances on the powered roller conveyor and is indexed under the structural strap arch, aligned against reference side guides.<\/li>\n<li><strong>Head stroke down<\/strong>: The floating strapping head moves downward until its contact face registers against the top surface of the bundle stack.<\/li>\n<li><strong>Strap cycling<\/strong>: The feed mechanism drives the strapping band around the arch track, retracts it onto the bundle perimeter, applies controlled tension, joins the strap via thermal or friction seal, and severs the band with an integrated shear blade.<\/li>\n<li><strong>Head retract<\/strong>: The head returns to its elevated home position clear of the transport aperture.<\/li>\n<li><strong>Conveyor index<\/strong>: The conveyor advances the stack forward by one programmed strap pitch. Steps 2 through 4 repeat for each subsequent strap location until the bundle recipe is satisfied.<\/li>\n<li><strong>Outfeed transfer<\/strong>: The finished bundle is released downstream to the next handling or packaging operation.<\/li>\n<\/ol>\n<p>During automatic operation, personnel remain strictly outside the machine safety enclosure. Stack adjustments, coil changes, or maintenance are performed exclusively with the station brought to a complete stop, electrically and pneumatically isolated, and locked out under verified safety procedures.<\/p>\n<h2 id=\"station\">The strapping station in a board line<\/h2>\n<p>An automatic board strapping machine functions as an inline station designed to tension, seal, and cut PET or PP straps around stacked boards directly on the material handling line.<\/p>\n<p>On our board packaging lines, the strapping section is engineered for rigid panels using PET or PP strapping belts. It is built online: the stack arrives on the conveyor, is strapped, and leaves on the same conveyor. Around it the line can carry a vacuum lifter, a stacker, a <a href=\"https:\/\/www.fhopepack.com\/videos\/horizontal-wrapping-machine-with-transitional-conveyor-belt\/\">wrapping station<\/a> or shrinking station and a palletiser. A similar online layout for long goods is shown in our <a href=\"https:\/\/www.fhopepack.com\/videos\/on-line-pvc-pe-ppr-pipe-bundling-and-pp-strapping-packing-line\/\">pipe bundling and PP strapping line<\/a>.<\/p>\n<p>The station must match the conveyor pass-line height on both sides and release each bundle on time. We size the arch, head, strap and conveyor with the rest of the line.<\/p>\n<h2 id=\"belt\">PET or PP strap: how we choose<\/h2>\n<p>Both strap materials are supported in our standard board packaging machines. Selecting between them is a physical engineering decision dictated by stack mass, holding duration, and board edge vulnerability, rather than raw material cost:<\/p>\n<table>\n<thead>\n<tr>\n<th>Strap property<\/th>\n<th>PET strap<\/th>\n<th>PP strap<\/th>\n<th>Practical effect on a board stack<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Stretch under load<\/td>\n<td>Low<\/td>\n<td>High<\/td>\n<td>PP relaxes more under sustained load; requires higher initial setting tension<\/td>\n<\/tr>\n<tr>\n<td>Tension held in storage<\/td>\n<td>Better<\/td>\n<td>Lower<\/td>\n<td>PET maintains stack compression over multi-month storage without slackening<\/td>\n<\/tr>\n<tr>\n<td>Edge behaviour<\/td>\n<td>Better on sharp board corners<\/td>\n<td>Cuts into sharp corners at high tension<\/td>\n<td>PP typically requires solid corner protectors on hard, sharp board edges<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Use PET for heavy bundles, long storage (months) or sharp edges, and PP for light stacks with protected edges and short storage. In both cases the board edge limits the tension: working tension stays below the edge crush resistance, and corner protection is added where needed.<\/p>\n<h2 id=\"straps\">Strap length formula and strap spacing<\/h2>\n<p>The strap loop length corresponds to the perimeter of the cross-section; it is governed exclusively by bundle width and height, independent of overall board length:<\/p>\n<pre><code>loop length per strap = 2 &times; (bundle width + bundle height)<\/code><\/pre>\n<pre><code>strap length per bundle = (loop length + allowance) &times; number of straps<\/code><\/pre>\n<p>The allowance factor accounts for the strap seal overlap, feeding clearances, arch track sweep, and external corner protector radii.<\/p>\n<p>Worked example for an illustrative bundle measuring 1,200 mm wide by 600 mm high:<\/p>\n<table>\n<thead>\n<tr>\n<th>Item<\/th>\n<th>Value<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Loop length per strap, 2 \u00d7 (1,200 + 600)<\/td>\n<td>3,600 mm<\/td>\n<\/tr>\n<tr>\n<td>Number of straps<\/td>\n<td>2<\/td>\n<\/tr>\n<tr>\n<td>Allowance per strap (joint overlap and corner protection)<\/td>\n<td>300 mm<\/td>\n<\/tr>\n<tr>\n<td>Strap length per bundle, 2 \u00d7 3,600 + 2 \u00d7 300<\/td>\n<td>7,800 mm<\/td>\n<\/tr>\n<tr>\n<td>With a 20 % order margin, 7,800 mm \u00d7 1.2<\/td>\n<td>about 9.4 m per bundle<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Strap spacing governs bundle structural stability during transit. As a fundamental baseline:<\/p>\n<ul>\n<li>Place the outer two straps near each end of the bundle, inset sufficiently to avoid corner break-out and to stay clear of designated forklift fork pockets.<\/li>\n<li>Space intermediate straps evenly so that no unsupported span exceeds the bundle height. For example, a heavy bundle 2,400 mm long and 600 mm high is configured with five strap positions.<\/li>\n<\/ul>\n<h2 id=\"head\">The strapping head and the conveyor<\/h2>\n<p>The strapping head is mounted on a rigid overhead arch structure spanning the powered roller conveyor. The conveyor acts as an active positioning axis, indexing the stack to each discrete strapping location.<\/p>\n<p>Three fundamental parameters are configured and stored per product recipe:<\/p>\n<ul>\n<li><strong>Strap positions<\/strong>: Programmed through the operator interface as an encoder-indexed positional recipe, allowing automated changeovers across board formats without physical limit switch adjustments.<\/li>\n<li><strong>Head stroke limits<\/strong>: The overhead vertical axis lowers the head to the board face to minimise free-air loop tensioning. Soft-touch sensing ensures the head applies necessary sealing contact without mechanically crushing or surface-marking the top board.<\/li>\n<li><strong>Conveyor indexing and lateral squaring<\/strong>: The conveyor advances one strap pitch per index cycle. Integrated adjustable side guides and an end reference stop centre and square the bundle before each cycle, eliminating angular strap drift\u2014the predominant cause of edge seal failures.<\/li>\n<\/ul>\n<h2 id=\"takt\">Bundle takt and line balance<\/h2>\n<p>System cycle time must synchronize with upstream manufacturing and downstream discharge. For an illustrative target output of 40 bundles per hour, a strapped bundle must clear the station every 90 s:<\/p>\n<table>\n<thead>\n<tr>\n<th>Item<\/th>\n<th>Value<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Output target (illustrative)<\/td>\n<td>40 bundles per hour<\/td>\n<\/tr>\n<tr>\n<td>Takt, 3,600 \u00f7 40<\/td>\n<td>90 s per bundle<\/td>\n<\/tr>\n<tr>\n<td>Straps per bundle (example)<\/td>\n<td>2<\/td>\n<\/tr>\n<tr>\n<td>Time budget per strap, 90 \u00f7 2<\/td>\n<td>45 s<\/td>\n<\/tr>\n<tr>\n<td>Operating condition<\/td>\n<td>Head stroke, strap feed, tension\/weld\/cut, conveyor index, and transfer must fit inside budget<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The 45 s budget covers head stroke, strap feed, tension, seal, cut and conveyor index. If the sum exceeds the takt, we add a second head, overlap the index with the strap cycle on a longer conveyor, or use fewer straps of a stronger strap.<\/p>\n<h2 id=\"selection-checklist\">Selection checklist for a board strapping machine<\/h2>\n<ul>\n<li>Board classification (gypsum, particleboard, MDF, insulation, composite), single-board thickness, and full stack dimensions (width, height, length).<\/li>\n<li>Bundle mass range (min\/max weight) and downstream material handling mode (forklift tines, clamp truck, or pallet runner).<\/li>\n<li>Strap specification: PET or PP, designated strap width and thickness, operational tension range, and requirement for automated corner protection.<\/li>\n<li>Number of strap positions per bundle and distance offsets from the stack ends.<\/li>\n<li>Infeed and outfeed roller conveyor pass-line height, roller pitch, drive zones, and integrated stack squaring mechanisms.<\/li>\n<li>Required line output in bundles per hour, with cycle time budgets of upstream stackers and downstream wrapping or palletising cells.<\/li>\n<li>Control architecture and automation integration: PLC platform, fieldbus communication, safety circuit handshake, and conveyor zone interlocking [manufacturer rating].<\/li>\n<\/ul>\n<h2 id=\"safety\">Controls and safety<\/h2>\n<p>The head travel and the conveyor movement are the danger zones. Keep everyone outside the frame and clear of the conveyor while the line runs. Stop, isolate and lock out the machine before clearing a jammed strap, changing a belt coil or adjusting a strap position.<\/p>\n<p>Safety integration aligns with destination market regulations. For European CE conformity, risk assessments comply with <strong>ISO 12100:2010<\/strong>, while machine-specific guarding, electrical interlocks, and hazard mitigation meet <strong>EN 415-10:2014<\/strong> standards for packaging and strapping machinery.<\/p>\n<h2 id=\"engineering-faq\">Engineering FAQ<\/h2>\n<p><strong>Q: Should I specify PET or PP strapping for our board bundles?<\/strong>\nA: Select PET strap when bundles exceed standard industrial weights, undergo flat-bed road transport, or require multi-month outdoor\/warehouse storage, as PET retains set tension without significant creep. Specify PP for light-duty, short-haul board packs where edge loading is low. Based on our project engineering data across rigid board and steel panel packaging lines, heavy stacks consistently achieve superior joint stability using high-tensile PET [manufacturer rating]. Specific strap specifications are engineered per project requirements.<\/p>\n<p><strong>Q: Can this strapping station integrate inline with an orbital or horizontal wrapping machine?<\/strong>\nA: Yes. In automated board packaging lines, the strapping station routinely links downstream of the stacking cell and immediately upstream of a protective stretch wrapping or shrink station to secure bundle geometry before moisture wrapping.<\/p>\n<p><strong>Q: Why is precise mechanical centring essential prior to strap application?<\/strong>\nA: If a board stack is skewed or offset relative to the arch centerline, the strap feeds unevenly across the corner radii, resulting in concentrated edge tension that can split boards or cause the strap to peel off the bundle edge during transport. Adjustable conveyor side guides eliminate this risk.<\/p>\n<h2 id=\"next-step\">Next step<\/h2>\n<p>To configure and quote an online board strapping station for your packaging line:<\/p>\n<ol>\n<li><strong>Submit your line data<\/strong>: Send your board stack dimensions (min\/max W \u00d7 H \u00d7 L), bundle mass profiles, and required takt time to <strong>info@fhopepack.com<\/strong>.<\/li>\n<li><strong>Receive an engineering proposal within 48 hours<\/strong>: We provide a preliminary station layout, strap type analysis, recommended head configuration, and conveyor interface validation.<\/li>\n<li><strong>Conduct a technical layout review<\/strong>: Our engineering team reviews conveyor pass-line heights, fieldbus handshakes, and bundle indexing integration with your project team.<\/li>\n<\/ol>\n<h2 id=\"related-reading\">Related reading<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fhopepack.com\/Automatic-board-packaging-line.html\">Automatic board packaging line<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/video-of-the-gypsum-packaging-line\/\">Gypsum board packaging line with orbital wrapper<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/automatic-lumber-bundle-strapping-packing-line\/\">Automatic lumber bundle strapping packing line<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/automatic-steel-tube-bundling-and-strapping-machine-video\/\">Automatic steel tube bundling and strapping machine<\/a><\/li>\n<\/ul>\n<h2 id=\"sources\">Sources<\/h2>\n<ul>\n<li>Online strapping section with PET or PP strapping belts: <a href=\"https:\/\/www.fhopepack.com\/Automatic-board-packaging-line.html\">Automatic board packaging line<\/a><\/li>\n<li>Strap length worked example: calculated from bundle width and height dimensions, illustrative baseline engineering values<\/li>\n<li>Bundle timing and line balance: derived from production output targets, checked against the head stroke and conveyor index time<\/li>\n<li>Machine in action: <a href=\"https:\/\/www.youtube.com\/watch?v=dU_oEsW6aaU\">our video on YouTube<\/a><\/li>\n<li>Standards scope: <a href=\"https:\/\/www.iso.org\/standard\/51528.html\">ISO 12100:2010<\/a> (Safety of machinery \u2014 General principles for design), <a href=\"https:\/\/www.nen.nl\/en\/nen-en-415-10-2014-en-191845\">EN 415-10:2014<\/a> (Safety of packaging machines \u2014 Part 10: General requirements)<\/li>\n<li>Strapping machine product range: <a href=\"https:\/\/www.fhopepack.com\/automatic-strapping-machine\/\">Automatic strapping machine<\/a><\/li>\n<\/ul>\n<p><strong>Last reviewed:<\/strong> 2026-10-04<\/p>","protected":false},"excerpt":{"rendered":"<p>Executive summary An automatic strapping machine for panel and board stacks straps each bundle on the conveyor as one online section of a board packaging line. We choose PET or PP strap by bundle weight, [&hellip;]<\/p>","protected":false},"author":1,"featured_media":4205,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Automatic strapping machine for panel stacks and boards","_seopress_titles_desc":"Inline automatic strapping machine for panel and board stacks: PET or PP strap choice, strap length formula, bundle takt and conveyor integration.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[{"_seopress_pro_rich_snippets_type":"custom","_seopress_pro_rich_snippets_custom":"<script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@graph\": [{\"@type\": \"FAQPage\", \"@id\": \"https:\/\/www.fhopepack.com\/videos\/automatic-strapping-machine-for-panel-and-board\/#faq\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Should I use PET or PP strap for a board stack?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Use PET when the bundle is heavy or stored for months, because PET stretches less and holds its tension longer than PP. Use PP for light stacks with protected edges, and add corner protection wherever the board edge is sharp.\"}}, {\"@type\": \"Question\", \"name\": \"Can the strapping machine work inline with a wrapping station?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Our board packaging line runs strapping as an online section between the stacker or wrapping section and the palletiser.\"}}, {\"@type\": \"Question\", \"name\": \"Why does the bundle have to be centred before strapping?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If the stack is off centre the strap lands on an edge instead of the face, so the conveyor uses side guides and an adjustable stop for each board width.\"}}]}, {\"@type\": \"VideoObject\", \"@id\": \"https:\/\/www.fhopepack.com\/videos\/automatic-strapping-machine-for-panel-and-board\/#video\", \"name\": \"Automatic Strapping Machine for Panel and Board\", \"description\": \"An automatic strapping machine for panel and board stacks straps each bundle on the conveyor as one online section of a board packaging line.\", \"thumbnailUrl\": [\"https:\/\/i.ytimg.com\/vi\/dU_oEsW6aaU\/hqdefault.jpg\"], \"embedUrl\": \"https:\/\/www.youtube.com\/embed\/dU_oEsW6aaU\", \"contentUrl\": \"https:\/\/www.youtube.com\/watch?v=dU_oEsW6aaU\", \"uploadDate\": \"2022-07-20\", \"duration\": \"PT3M25S\"}]}<\/script>"}],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":{"4494":"1"},"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"default","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-4336","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-coiling-machine"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/4336","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=4336"}],"version-history":[{"count":9,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/4336\/revisions"}],"predecessor-version":[{"id":17949,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/4336\/revisions\/17949"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/4205"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=4336"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=4336"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=4336"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}