{"id":3524,"date":"2021-01-22T08:01:11","date_gmt":"2021-01-22T08:01:11","guid":{"rendered":"https:\/\/www.fhopepack.com\/videos\/?p=3524"},"modified":"2026-03-24T00:50:58","modified_gmt":"2026-03-24T00:50:58","slug":"automatic-m-type-pallet-wrapper-with-film-cutting-clamping-and-remote-control","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/automatic-m-type-pallet-wrapper-with-film-cutting-clamping-and-remote-control\/","title":{"rendered":"Automatic M-Type Pallet Wrapper with Film Cutting, Clamping and Remote Control \u2014 Engineering Specifications and Field Performance"},"content":{"rendered":"<h2>1. What Is an M-Type Pallet Wrapper and Why Does the Turntable Design Matter?<\/h2>\n<iframe loading=\"lazy\" width=\"940\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/hTgg1A7Qz9g\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<p>\nAn M-type pallet wrapper is an automated stretch wrapping machine featuring a turntable with cut-out sections that allow direct pallet jack access without a ramp, reducing loading\/unloading time by 8-12 seconds per cycle compared to standard turntables.\n<\/p>\n<p>\nThe &#8220;M-type&#8221; designation refers to the turntable geometry. Unlike solid turntables requiring a 3-4 meter ramp for pallet jack entry, the M-type design integrates two opposing cut-outs that align with standard pallet fork spacing (160-180 mm fork width, 680-720 mm between forks for EUR pallets). This eliminates the ramp as a trip hazard and reduces the machine footprint by 2.5-3.5 m\u00b2 in facilities where pallet jacks are the primary loading method.\n<\/p>\n<p>\nField reality: In high-throughput distribution centers processing 200+ pallets per shift, the ramp elimination translates to 45-60 minutes of recovered labor time daily \u2014 not from faster wrapping, but from removing the dismount\/remount cycles operators perform when navigating ramps with loaded jacks.\n<\/p>\n<p>\nThe machine shown in the video above demonstrates the core cycle: load pallet \u2192 initiate wrap via remote control \u2192 automatic film application with pre-stretch \u2192 automatic cut and clamp \u2192 unload. Total cycle time for a 1.6m-tall load: 45-65 seconds depending on wrap pattern complexity.\n<\/p>\n<iframe loading=\"lazy\" width=\"940\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/hTgg1A7Qz9g\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<hr \/>\n<h2>2. Core Components and Their Engineering Specifications<\/h2>\n<h3>2.1 Automatic Film Cutting and Clamping System \u2014 How It Actually Works<\/h3>\n<p>\nThe cut\/clamp mechanism uses a pneumatic blade (0.4-0.6 MPa air supply) actuated by a solenoid valve with 12-18 ms response time, followed by a mechanical clamp that secures the film tail with 80-120 N holding force.\n<\/p>\n<p>\nCommon failure mode: in cold storage environments (&lt;5\u00b0C), pneumatic lines accumulate condensation, causing sluggish blade actuation. The fix is installing a coalescing filter with auto-drain at the machine inlet \u2014 a $45 component that prevents 2-3 minute cycle delays per shift. Without it, operators revert to manual cutting, defeating the automation benefit.\n<\/p>\n<p>\nThe system eliminates the manual film-cutting step, which in semi-automatic machines accounts for 15-20% of total cycle time. More critically, it ensures consistent tail length (typically 150-200 mm secured against the load), preventing film unraveling during transit \u2014 a frequent claim root cause in LTL shipments where loads are repositioned multiple times.\n<\/p>\n<h3>2.2 Remote Control Operation \u2014 Range, Latency, and Safety Interlocks<\/h3>\n<p>\nIndustrial-grade RF remote (433 MHz or 2.4 GHz ISM band) with 15-30 m line-of-sight range, &lt;50 ms command latency, IP65 rating for dust\/water resistance.\n<\/p>\n<p>\nSafety integration: The remote interfaces with the machine&#8217;s safety PLC (SIL2-rated per IEC 61508) through a monitored channel. If the remote signal is lost for &gt;500 ms during a cycle, the machine executes a controlled stop: turntable decelerates at 2.5 rad\/s\u00b2, film carriage halts at current position, and the HMI displays &#8220;REMOTE SIGNAL LOST&#8221; until reconnection or manual reset.\n<\/p>\n<p>\nThis allows the forklift operator to initiate and monitor the wrap cycle from the cab, eliminating the 6-8 dismount\/remount cycles per shift that occur when the control panel is wall-mounted 3-5 meters from the wrapping zone. Time saved: 90-120 seconds per shift. Fatigue reduction: harder to quantify, but measurable in reduced near-miss incidents (operators aren&#8217;t rushing to beat the cycle time on foot).\n<\/p>\n<h3>2.3 Powered Pre-Stretch System \u2014 The Physics of Film Savings<\/h3>\n<p>\nDual-roller pre-stretch assembly with independent VFD control, achieving 150-300% stretch ratio (typical operating point: 250% for 20-micron LLDPE hand-wrap equivalent film).\n<\/p>\n<p>\nFilm consumption math: A 1.8m-tall pallet wrapped with 50% overlap, 3 top\/bottom wraps, and 250% pre-stretch consumes 85-95 grams of film per pallet. Manual wrapping of the same load consumes 280-350 grams. At $2.80\/kg for machine-grade LLDPE and 400 pallets\/day, annual film savings: $23,000-28,000.\n<\/p>\n<p>\nPre-stretch failure mode: when the brake band on the pre-stretch rollers wears unevenly (typical service interval: 6,000-8,000 cycles), film tension oscillates \u00b115% during the wrap cycle. This creates visible &#8220;waves&#8221; in the film layer and reduces load containment force by 20-30%. The tell: film breaks during the top-wrap phase even though settings haven&#8217;t changed. Preventive maintenance: inspect brake band wear every 500 hours, replace at 0.8 mm thickness remaining (new: 2.5 mm).\n<\/p>\n<h3>2.4 PLC Control with HMI Interface \u2014 What Parameters Actually Matter<\/h3>\n<p>\nEntry-level models use Mitsubishi FX3U or Siemens S7-1200 PLCs with 60-100 ms scan time. Premium models use Allen-Bradley CompactLogix or Siemens S7-1500 with 10-20 ms scan time and integrated motion control.\n<\/p>\n<p>\nCritical wrap parameters:\n<\/p>\n<table>\n<thead>\n<tr><th>Parameter<\/th>\n<th>Typical Range<\/th>\n<th>Impact on Load Stability<\/th><\/tr>\n<p>\n<\/p><\/thead>\n\n<tbody>\n<tr><td>Top wraps<\/td>\n<td>2-4<\/td>\n<td>Prevents top-layer shifting during forklift handling<\/td><\/tr>\n<tr><td>Bottom wraps<\/td>\n<td>2-3<\/td>\n<td>Anchors film to pallet deck; critical for slip-sheet loads<\/td><\/tr>\n<tr><td>Carriage speed<\/td>\n<td>1.5-5.5 m\/min<\/td>\n<td>Faster = less overlap, lower film usage, reduced containment<\/td><\/tr>\n<tr><td>Turntable speed<\/td>\n<td>3-15 RPM<\/td>\n<td>Higher speeds increase centrifugal film tension but risk load tipping for unstable loads<\/td><\/tr>\n<tr><td>Pre-stretch ratio<\/td>\n<td>150-300%<\/td>\n<td>Higher = less film, but excessive stretch reduces puncture resistance<\/td><\/tr>\n<p>\n<\/p><\/tbody>\n\n<\/table>\n<p>\nThe HMI stores 20-50 preset recipes, allowing quick changeover between product families. A facility wrapping both stable boxed loads and unstable bagged loads can switch recipes in &lt;30 seconds rather than manually adjusting 5-7 parameters.\n<\/p>\n<hr \/>\n<h2>3. Technical Specifications \u2014 Model FH-M2500 (Representative Unit)<\/h2>\n<p>\nSpecifications below reflect the machine class shown in the video, not generic ranges:\n<\/p>\n<table>\n<thead>\n<tr><th>Parameter<\/th>\n<th>Specification<\/th>\n<th>Unit<\/th>\n<th>Notes<\/th><\/tr>\n<p>\n<\/p><\/thead>\n\n<tbody>\n<tr><td>Max Load Weight<\/td>\n<td>2,500<\/td>\n<td>kg<\/td>\n<td>Turntable rated capacity; structural frame rated to 3,200 kg static<\/td><\/tr>\n<tr><td>Max Load Height<\/td>\n<td>2,400<\/td>\n<td>mm<\/td>\n<td>Optional mast extension to 2,800 mm<\/td><\/tr>\n<tr><td>Turntable Diameter<\/td>\n<td>1,650<\/td>\n<td>mm<\/td>\n<td>M-type cut-outs: 220 mm width, 850 mm spacing (center-to-center)<\/td><\/tr>\n<tr><td>Turntable Speed<\/td>\n<td>4-12<\/td>\n<td>RPM<\/td>\n<td>VFD-controlled; default 8 RPM for stable loads<\/td><\/tr>\n<tr><td>Film Carriage Speed<\/td>\n<td>2.0-4.5<\/td>\n<td>m\/min<\/td>\n<td>Dual-speed: 4.5 m\/min for straight sections, 2.0 m\/min for top\/bottom wraps<\/td><\/tr>\n<tr><td>Pre-Stretch Ratio<\/td>\n<td>250<\/td>\n<td>%<\/td>\n<td>Fixed mechanical ratio; brake-band tension adjustable<\/td><\/tr>\n<tr><td>Film Type<\/td>\n<td>LLDPE<\/td>\n<td>\u2014<\/td>\n<td>Machine-grade, 20-23 micron, 500 mm width<\/td><\/tr>\n<tr><td>Film Roll Max OD<\/td>\n<td>250<\/td>\n<td>mm<\/td>\n<td>Core ID: 76 mm (3 inch)<\/td><\/tr>\n<tr><td>Control System<\/td>\n<td>Siemens S7-1200<\/td>\n<td>\u2014<\/td>\n<td>Optional upgrade to S7-1500<\/td><\/tr>\n<tr><td>Interface<\/td>\n<td>7&#8243; HMI Touch Screen<\/td>\n<td>\u2014<\/td>\n<td>800\u00d7480 resolution, 256-color<\/td><\/tr>\n<tr><td>Power Supply<\/td>\n<td>380V\/50Hz\/3-phase<\/td>\n<td>Volts<\/td>\n<td>Optional 220V\/60Hz for North America<\/td><\/tr>\n<tr><td>Air Requirements<\/td>\n<td>0.5<\/td>\n<td>MPa<\/td>\n<td>80 L\/min at 6 bar for cut\/clamp mechanism<\/td><\/tr>\n<tr><td>Safety Features<\/td>\n<td>Emergency stop, safety bumpers, photo-eye curtain<\/td>\n<td>\u2014<\/td>\n<td>Per ISO 12100:2010 Type C<\/td><\/tr>\n<p>\n<\/p><\/tbody>\n\n<\/table>\n<p>\nCertifications and Compliance:\n<\/p>\n<ul>\n<li>CE marked per Machinery Directive 2006\/42\/EC<\/li>\n<li>Risk assessment per ISO 12100:2010 (Type C standard for pallet wrapping machines)<\/li>\n<li>Electrical safety per IEC 60204-1<\/li>\n<li>Optional: ANSI\/RIA R15.06 compliance for North American installations<\/li>\n<\/ul>\n<p>\nDeliverable Documentation:\n<\/p>\n<ul>\n<li>Electrical schematics (PDF + DWG)<\/li>\n<li>Pneumatic circuit diagram<\/li>\n<li>PLC program backup (for Siemens: .zap17; for Allen-Bradley: .ACD)<\/li>\n<li>FAT (Factory Acceptance Test) record with load containment force measurements<\/li>\n<li>CE Declaration of Conformity<\/li>\n<li>3D STEP file for integration into line layout CAD<\/li>\n<\/ul>\n<hr \/>\n<h2>4. M-Type Turntable Design \u2014 Structural Details and Maintenance Requirements<\/h2>\n<p>\nTurntable fabricated from Q355B structural steel (yield strength: 355 MPa), 12 mm plate thickness for the deck, 100\u00d750\u00d75 mm rectangular tubing for the frame. Weld seams inspected per GB\/T 3323 UT Class II or equivalent.\n<\/p>\n<p>\nThe M-type cut-outs create stress concentration points. After 10,000-12,000 cycles (typical: 18-24 months in single-shift operation), inspect the cut-out corners for hairline cracks using dye penetrant testing (PT). Repair: grind out crack, fill with E7018 weld rod, re-machine surface flat to \u00b10.5 mm. Cost: 4-6 hours downtime, $300-450 labor. Ignoring it: catastrophic turntable failure under eccentric load, 3-5 day downtime, $8,000-12,000 replacement.\n<\/p>\n<p>\nBearing maintenance: Turntable rotation supported by four tapered roller bearings (typical: SKF 30208 or equivalent). Lubrication interval: 500 hours with NLGI #2 lithium grease. Failure symptom: audible grinding during rotation, turntable wobble &gt;2 mm at outer edge. Replacement time: 2.5-3 hours with proper puller tools.\n<\/p>\n<p>\nThe cut-out design does reduce torsional rigidity compared to a solid turntable \u2014 measured at 15-18% lower in finite element analysis. For loads exceeding 2,000 kg with significant overhang (&gt;100 mm beyond pallet edge), specify the reinforced M-type option (14 mm deck plate, 120\u00d760\u00d76 mm frame tubing) to maintain deflection under load at &lt;3 mm at the cut-out edge.\n<\/p>\n<hr \/>\n<h2>5. Operational Efficiency \u2014 Throughput, Labor, and ROI Calculation<\/h2>\n<p>\nThroughput comparison for a 1.6m-tall, 1,200 kg load:\n<\/p>\n<table>\n<thead>\n<tr><th>Wrapping Method<\/th>\n<th>Cycle Time<\/th>\n<th>Film Consumption<\/th>\n<th>Operator Time per Pallet<\/th><\/tr>\n<p>\n<\/p><\/thead>\n\n<tbody>\n<tr><td>Manual hand wrap<\/td>\n<td>180-240 s<\/td>\n<td>320 g<\/td>\n<td>180-240 s (100% of cycle)<\/td><\/tr>\n<tr><td>Semi-automatic (foot pedal)<\/td>\n<td>75-90 s<\/td>\n<td>140 g<\/td>\n<td>25-30 s (30% of cycle)<\/td><\/tr>\n<tr><td>M-type automatic with remote<\/td>\n<td>50-65 s<\/td>\n<td>90 g<\/td>\n<td>8-12 s (15% of cycle)<\/td><\/tr>\n<p>\n<\/p><\/tbody>\n\n<\/table>\n<p>\nROI calculation for a facility wrapping 300 pallets\/day, 250 days\/year:\n<\/p>\n<table>\n<thead>\n<tr><th>Cost Component<\/th>\n<th>Manual<\/th>\n<th>M-Type Automatic<\/th>\n<th>Annual Difference<\/th><\/tr>\n<p>\n<\/p><\/thead>\n\n<tbody>\n<tr><td>Film cost ($2.80\/kg)<\/td>\n<td>$67,200<\/td>\n<td>$18,900<\/td>\n<td>-$48,300<\/td><\/tr>\n<tr><td>Labor (wrap only, $22\/hr)<\/td>\n<td>$49,500<\/td>\n<td>$12,375<\/td>\n<td>-$37,125<\/td><\/tr>\n<tr><td>Machine cost (amortized 5 yr)<\/td>\n<td>$0<\/td>\n<td>$8,000<\/td>\n<td>+$8,000<\/td><\/tr>\n<tr><td>Maintenance (annual)<\/td>\n<td>$0<\/td>\n<td>$1,200<\/td>\n<td>+$1,200<\/td><\/tr>\n<tr><td><strong>Net annual savings<\/strong><\/td>\n<td>\u2014<\/td>\n<td>\u2014<\/td>\n<td><strong>$76,425<\/strong><\/td><\/tr>\n<p>\n<\/p><\/tbody>\n\n<\/table>\n<p>\nPayback period: Machine cost $38,000-45,000 (installed). Simple payback: 6-8 months at 300 pallets\/day. At 150 pallets\/day: 12-15 months.\n<\/p>\n<p>\nHidden cost: film quality. Cheap film (&lt;$2.00\/kg) has inconsistent thickness (\u00b13 micron vs. \u00b10.5 micron for premium) and lower puncture resistance. Running cheap film on a pre-stretch system designed for 250% stretch results in 12-18% film breakage rate during the wrap cycle. Each break requires manual re-threading (90-120 seconds) and re-wrapping the pallet (another 50-65 seconds). At 8 breaks\/shift, you&#039;ve lost 20-25 minutes of throughput \u2014 enough to erase the labor savings from automation. Specify: 20-23 micron LLDPE, 280-320% elongation at break, 4.5-5.5 N\/25mm puncture resistance.\n<\/p>\n<hr \/>\n<h2>6. Comparison: M-Type vs. Standard Turntable vs. Rotary Arm<\/h2>\n<p>\nDecision framework for facilities evaluating wrapper types:\n<\/p>\n<table>\n<thead>\n<tr><th>Criterion<\/th>\n<th>M-Type Turntable<\/th>\n<th>Standard Turntable<\/th>\n<th>Rotary Arm<\/th><\/tr>\n<p>\n<\/p><\/thead>\n\n<tbody>\n<tr><td>Floor space required<\/td>\n<td>3.2\u00d73.2 m<\/td>\n<td>4.5\u00d74.5 m (includes ramp)<\/td>\n<td>3.0\u00d73.0 m<\/td><\/tr>\n<tr><td>Max load weight<\/td>\n<td>2,500 kg<\/td>\n<td>3,000 kg<\/td>\n<td>2,000 kg (arm deflection limit)<\/td><\/tr>\n<tr><td>Pallet jack access<\/td>\n<td>Direct (no ramp)<\/td>\n<td>Ramp required<\/td>\n<td>Direct (no ramp)<\/td><\/tr>\n<tr><td>Forklift access<\/td>\n<td>Side-loading<\/td>\n<td>Side-loading<\/td>\n<td>Top-loading (arm swings over)<\/td><\/tr>\n<tr><td>Best for<\/td>\n<td>Mixed forklift\/pallet jack facilities<\/td>\n<td>High-weight loads (&gt;2T)<\/td>\n<td>Overhead-constrained facilities, very tall loads (&gt;2.8m)<\/td><\/tr>\n<tr><td>Cost (installed)<\/td>\n<td>$38,000-45,000<\/td>\n<td>$35,000-42,000<\/td>\n<td>$52,000-65,000<\/td><\/tr>\n<p>\n<\/p><\/tbody>\n\n<\/table>\n<p>\nM-type is the optimal choice when:\n<\/p>\n<ul>\n<li>Facility uses both forklifts and pallet jacks (eliminates ramp bottleneck)<\/li>\n<li>Floor space is constrained (&lt;15 m\u00b2 available for wrapping station)<\/li>\n<li>Load weight is \u22642,500 kg (typical for consumer goods, food\/beverage)<\/li>\n<li>Throughput requirement is 150-400 pallets\/day (below 150: semi-auto may suffice; above 400: consider inline automatic)<\/li>\n<\/ul>\n<hr \/>\n<h2>7. Common Failure Modes and Preventive Maintenance Schedule<\/h2>\n<p>\nField-derived maintenance schedule based on 2-shift operation (3,200 hours\/year):\n<\/p>\n<table>\n<thead>\n<tr><th>Interval<\/th>\n<th>Task<\/th>\n<th>Time Required<\/th>\n<th>Parts Cost<\/th><\/tr>\n<p>\n<\/p><\/thead>\n\n<tbody>\n<tr><td>Daily (pre-shift)<\/td>\n<td>Inspect film tail clamp for debris; verify emergency stop function<\/td>\n<td>5 min<\/td>\n<td>$0<\/td><\/tr>\n<tr><td>Weekly<\/td>\n<td>Check pneumatic filter; drain if water visible<\/td>\n<td>3 min<\/td>\n<td>$0<\/td><\/tr>\n<tr><td>Monthly<\/td>\n<td>Inspect pre-stretch brake band wear; measure thickness<\/td>\n<td>15 min<\/td>\n<td>$0<\/td><\/tr>\n<tr><td>500 hours<\/td>\n<td>Lubricate turntable bearings (4 points), carriage mast rails<\/td>\n<td>30 min<\/td>\n<td>$25 (grease)<\/td><\/tr>\n<tr><td>2,000 hours<\/td>\n<td>Replace pre-stretch brake band; inspect film carriage chain tension<\/td>\n<td>90 min<\/td>\n<td>$180 (band)<\/td><\/tr>\n<tr><td>6,000 hours<\/td>\n<td>Replace turntable bearings; inspect cut\/clamp blade sharpness<\/td>\n<td>3.5 hours<\/td>\n<td>$320 (bearings) + $85 (blade)<\/td><\/tr>\n<tr><td>12,000 hours<\/td>\n<td>Dye penetrant test on M-type cut-out corners; full electrical inspection<\/td>\n<td>6 hours<\/td>\n<td>$150 (PT kit)<\/td><\/tr>\n<p>\n<\/p><\/tbody>\n\n<\/table>\n<p>\nTop 3 field failures and their root causes:\n<\/p>\n<p>\n<strong>1. Film breaks during top wrap (40% of service calls)<\/strong>\n<\/p>\n<ul>\n<li>Root cause: pre-stretch brake band worn unevenly \u2192 tension oscillation<\/li>\n<li>Fix: replace brake band; verify carriage speed is not set too high for film gauge<\/li>\n<li>Prevention: monthly thickness inspection; replace at 0.8 mm remaining<\/li>\n<\/ul>\n<p>\n<strong>2. Turntable wobble under load (&gt;2 mm at edge)<\/strong>\n<\/p>\n<ul>\n<li>Root cause: bearing preload lost due to grease degradation or contamination<\/li>\n<li>Fix: replace bearings; verify mounting surface flatness (\u22640.3 mm over 1,650 mm diameter)<\/li>\n<li>Prevention: 500-hour lubrication with correct grease (NLGI #2, lithium complex)<\/li>\n<\/ul>\n<p>\n<strong>3. Cut\/clamp fails to secure film tail<\/strong>\n<\/p>\n<ul>\n<li>Root cause: pneumatic pressure &lt;0.4 MPa or clamp surface contaminated with film residue<\/li>\n<li>Fix: verify air supply; clean clamp surfaces with isopropyl alcohol<\/li>\n<li>Prevention: weekly inspection; install coalescing filter on air inlet<\/li>\n<\/ul>\n<hr \/>\n<h2>8. Conclusion \u2014 When Does the M-Type Design Justify the Investment?<\/h2>\n<p>\nThe M-type pallet wrapper with automatic film cut\/clamp and remote control is cost-effective for facilities processing 150+ pallets\/day where pallet jack access is required and floor space is constrained.\n<\/p>\n<p>\nKey decision metrics:\n<\/p>\n<ul>\n<li>Throughput requirement: 150-400 pallets\/day (below: semi-automatic; above: inline automatic)<\/li>\n<li>Load weight: \u22642,500 kg (above: standard turntable with higher capacity)<\/li>\n<li>Facility layout: pallet jack usage \u226530% of loads (below: standard turntable acceptable)<\/li>\n<li>Available floor space: &lt;15 m\u00b2 (M-type saves 2.5-3.5 m\u00b2 vs. standard with ramp)<\/li>\n<\/ul>\n<p>\nProcurement checklist \u2014 what to request from the supplier before purchase:\n<\/p>\n<ul>\n<li>CE Declaration of Conformity per Machinery Directive 2006\/42\/EC<\/li>\n<li>Risk assessment report per ISO 12100:2010<\/li>\n<li>FAT record with load containment force test (minimum 3 pallets at max rated weight)<\/li>\n<li>Electrical schematics and PLC program backup<\/li>\n<li>3D STEP file for line integration<\/li>\n<li>Spare parts list with lead times (critical: brake band, cut\/clamp blade, bearings)<\/li>\n<li>Warranty terms: minimum 12 months on parts, 24 months on structural frame<\/li>\n<\/ul>\n<p>\nFor detailed specifications and model selection, refer to the <a href=\"https:\/\/www.fhopepack.com\/Stretch_wrapping_machine.html\">Fhopepack stretch wrapping machine catalog<\/a>. Video demonstration above shows the FH-M2500 model in operation with 23-micron LLDPE film, 250% pre-stretch, and 8 RPM turntable speed.\n<\/p>","protected":false},"excerpt":{"rendered":"<ol>\n<li>What Is an M-Type Pallet Wrapper and Why Does the Turntable Design Matter? An M-type pallet wrapper is an automated stretch wrapping machine featuring a turntable with cut-out sections that allow direct pallet jack [&hellip;]<\/li>\n<\/ol>","protected":false},"author":4,"featured_media":3527,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[{"_seopress_pro_rich_snippets_type":"none"}],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"default","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[290],"tags":[],"class_list":["post-3524","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-pallet-inverter"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/3524","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=3524"}],"version-history":[{"count":9,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/3524\/revisions"}],"predecessor-version":[{"id":12743,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/3524\/revisions\/12743"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/3527"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=3524"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=3524"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=3524"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}