{"id":268,"date":"2018-04-19T02:12:33","date_gmt":"2018-04-19T02:12:33","guid":{"rendered":"http:\/\/www.fhopepack.com\/videos\/?p=268"},"modified":"2026-11-06T13:14:00","modified_gmt":"2026-11-06T13:14:00","slug":"hose-pipe-wrapping-machine-coil-packing-machines-for-steel","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/hose-pipe-wrapping-machine-coil-packing-machines-for-steel\/","title":{"rendered":"Hose Pipe Wrapping Machine and Coil Packing Machines for Steel"},"content":{"rendered":"<blockquote>\n<p><strong>Executive summary<\/strong>\nThe <strong>FPH-500W<\/strong> wraps flexible rubber and hydraulic hose coils weighing <strong>20\u2013200 kg<\/strong>, utilizing manual front loading and surface-protecting guide rollers. The <strong>FPS-400<\/strong> packs heavy slit steel, wire, and strip coils weighing <strong>100\u20132,000 kg<\/strong>, featuring a structural <strong>top-opening ring frame<\/strong> configured for direct overhead crane or forklift loading.<\/p>\n<\/blockquote>\n<iframe loading=\"lazy\" width=\"940\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/M9IJmclNEiI\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<ul>\n<li><strong>FPH-500W<\/strong> \u2014 Specialized for elastomeric, plastic, and multi-spiral wire hydraulic hose coils weighing <strong>20\u2013200 kg<\/strong>, engineered to prevent core collapse and outer deformation during high-speed wrapping.<\/li>\n<li><strong>FPS-400<\/strong> \u2014 Engineered for structural steel, slit coils, copper strips, and wire packs weighing <strong>100\u20132,000 kg<\/strong>, featuring a segmented, <strong>top-opening ring arch<\/strong> that allows overhead gantry cranes, hoists with C-hooks, or fork attachments to lower heavy bundles straight into the packing station.<\/li>\n<\/ul>\n<p>Because the packaging material traverses both faces and the inner and outer diameters simultaneously in a single pass, surface coverage is continuous. Each revolution of the ring advances the wrapping material along the coil periphery by a distance governed by the ratio of ring rotational speed to roller index speed:<\/p>\n<p>Advance Pitch = Tape Width \u00d7 (1 &#8211; Overlap Ratio)<\/p>\n<p>Variable-frequency drives (VFDs) provide precise electronic synchronization, allowing operators to adjust material overlap continuously between <strong>10% and 90%<\/strong> to meet storage and shipping specifications.<\/p>\n<h2>Same principle, different loads<\/h2>\n<h3>Shared Dimensional Envelope vs. Payload Boundary<\/h3>\n<p>While both machines can accommodate coils sharing an outer diameter of <strong>600\u20131,400 mm<\/strong> and a width of <strong>150\u2013400 mm<\/strong>, total package mass dictates the machine chassis selection.<\/p>\n<table>\n<thead>\n<tr>\n<th>Selection Boundary Factor<\/th>\n<th>FPH-500W (Hose \/ Flexible)<\/th>\n<th>FPS-400 (Steel \/ Rigid)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Payload Capacity Envelope<\/strong><\/td>\n<td><strong>20\u2013200 kg<\/strong> (Structural limit)<\/td>\n<td><strong>100\u20132,000 kg<\/strong> (Heavy structural frame)<\/td>\n<\/tr>\n<tr>\n<td><strong>Coil Inner Diameter (ID)<\/strong><\/td>\n<td>300\u2013800 mm<\/td>\n<td>508 \/ 610 mm (Standard mill mandrels)<\/td>\n<\/tr>\n<tr>\n<td><strong>Coil Outer Diameter (OD)<\/strong><\/td>\n<td>600\u20131,400 mm<\/td>\n<td>800\u20131,400 mm (Base range)<\/td>\n<\/tr>\n<tr>\n<td><strong>Coil Face Width Range<\/strong><\/td>\n<td>150\u2013400 mm<\/td>\n<td>100\u2013400 mm<\/td>\n<\/tr>\n<tr>\n<td><strong>Cradle Roller Architecture<\/strong><\/td>\n<td>Centering rollers for flexible coils<\/td>\n<td>Heavy-duty cradle rollers for rigid coils<\/td>\n<\/tr>\n<tr>\n<td><strong>Primary Structural Gate<\/strong><\/td>\n<td>Annular ring with front loading<\/td>\n<td>Top-opening arch with interlocked pins<\/td>\n<\/tr>\n<tr>\n<td><strong>Installed Drive Power<\/strong><\/td>\n<td>3.5 kW<\/td>\n<td>4.0 kW<\/td>\n<\/tr>\n<tr>\n<td><strong>Cycle Wrapping Speed<\/strong><\/td>\n<td>28\u201340 s\/pcs<\/td>\n<td>Set by layer count and coil geometry, confirmed per project<\/td>\n<\/tr>\n<tr>\n<td><strong>Pneumatic Requirement<\/strong><\/td>\n<td>Optional auxiliary line<\/td>\n<td>5\u20137 kgf\/cm\u00b2 (0.5\u20130.7 MPa) shop air required<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><a id=\"hose-coil-needs\"><\/a><\/p>\n<h2>Hose coil needs<\/h2>\n<p>A hose pipe wrapping machine handles medium-weight, resilient products that require delicate tension management and positive external stabilization:<\/p>\n<ul>\n<li><strong>Anti-Deformation Support<\/strong>: Bottom support rollers with adjustable centre distance spread the load and limit ovalisation or pinching of soft rubber carcasses.<\/li>\n<li><strong>Adjustable Lateral Restraint Rollers<\/strong>: Ergonomically adjusted vertical guide rollers stabilize tall, narrow hose coils and stop axial tipping during high acceleration.<\/li>\n<li><strong>Tension-Regulated Payoff Brake<\/strong>: A friction brake with adjustable pre-load holds a stable wrapping tension, preventing collapse of corrugated walls or non-reinforced conduits; the tension setting is calibrated on the first coil of each product family.<\/li>\n<li><strong>Dual Operating Modes<\/strong>: Switchable manual jog mode for coil staging and fully automatic wrapping cycles controlled via a unified push-button operator pedestal.<\/li>\n<li><strong>Adjustable Friction Drive<\/strong>: A friction wheel drives the main orbital ring, with spring tension adjustment to limit rotational slip during rapid stops.<\/li>\n<\/ul>\n<p>Typical wrap media include stretch film (PE), high-density polyethylene (HDPE) film, and woven polypropylene tape, creating a sealed barrier against moisture, UV degradation, and workshop particulates.<\/p>\n<p><a id=\"steel-coil-needs\"><\/a><\/p>\n<h2>Steel coil needs<\/h2>\n<p>A steel coil packing machine must endure severe dynamic impact loads, sharp slit edges, and continuous industrial operation:<\/p>\n<ul>\n<li><strong>Top-Opening Ring Architecture<\/strong>: The upper arch of the orbital ring unlocks and tilts open via a pneumatic cylinder. This clear opening allows overhead crane C-hooks or wire rope slings to place coils of up to <strong>2,000 kg<\/strong> directly onto the cradle rollers without machine frame collisions.<\/li>\n<li><strong>Ring Lock Pins<\/strong>: Mechanical interlocks secure the closed ring before rotation begins, so the ring joint stays closed at the machine&#8217;s maximum ring speed of 100 r\/min.<\/li>\n<li><strong>Heavy-Duty Rollers<\/strong>: Thick-wall steel rollers with a protective lining resist contact stress and protect the coil edge from burrs and micro-scratching; the lining grade is specified per coil surface.<\/li>\n<li><strong>Integrated PLC and HMI Automation<\/strong>: A PLC with an operator touchscreen sets wrap sequences, reinforced tail-end overwraps and motor diagnostics.<\/li>\n<li><strong>Pneumatic Utility<\/strong>: Operates on a standard factory air supply of <strong>5\u20137 kgf\/cm\u00b2 (0.5\u20130.7 MPa)<\/strong> to power ring opening cylinders and safety clamp assemblies.<\/li>\n<\/ul>\n<p><a id=\"at-a-glance\"><\/a><\/p>\n<h2>At a glance<\/h2>\n<table>\n<thead>\n<tr>\n<th>Engineering Aspect<\/th>\n<th>Hose Pipe Coil Wrapper (FPH-500W)<\/th>\n<th>Steel Coil Packing Machine (FPS-400)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Payload Profile<\/strong><\/td>\n<td>Flexible, lightweight hose \/ pipe (20\u2013200 kg)<\/td>\n<td>Dense, rigid carbon \/ stainless steel (100\u20132,000 kg)<\/td>\n<\/tr>\n<tr>\n<td><strong>Material Loading<\/strong><\/td>\n<td>Manual front insertion \/ workstation hoist<\/td>\n<td>Overhead crane, hoist with C-hook, or counterbalanced truck<\/td>\n<\/tr>\n<tr>\n<td><strong>Structural Frame<\/strong><\/td>\n<td>Enclosed annular ring with front access<\/td>\n<td>Hinged top-opening ring arch with safety interlock pins<\/td>\n<\/tr>\n<tr>\n<td><strong>Coil Centering<\/strong><\/td>\n<td>Adjustable nylon \/ PU vertical lateral guide rollers<\/td>\n<td>Solid, heavy-gauge steel cradle rollers with heavy PU lining<\/td>\n<\/tr>\n<tr>\n<td><strong>Tension Range<\/strong><\/td>\n<td>Low to medium, to avoid coil collapse<\/td>\n<td>Medium to high, for tight containment<\/td>\n<\/tr>\n<tr>\n<td><strong>Control System<\/strong><\/td>\n<td>Relay logic \/ VFD manual-auto console<\/td>\n<td>Industrial PLC with colour HMI<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><a id=\"data\"><\/a><\/p>\n<h2>Data<\/h2>\n<table>\n<thead>\n<tr>\n<th>Technical Parameter<\/th>\n<th>FPH-500W (Hose \/ Pipe)<\/th>\n<th>FPS-400 (Steel \/ Slit Coil)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Coil Inner Diameter (ID)<\/strong><\/td>\n<td>300\u2013800 mm<\/td>\n<td>508 \/ 610 mm (Standard Mandrel Sizes)<\/td>\n<\/tr>\n<tr>\n<td><strong>Coil Outer Diameter (OD)<\/strong><\/td>\n<td>600\u20131,400 mm<\/td>\n<td>800\u20131,400 mm<\/td>\n<\/tr>\n<tr>\n<td><strong>Coil Width \/ Height<\/strong><\/td>\n<td>150\u2013400 mm<\/td>\n<td>100\u2013400 mm<\/td>\n<\/tr>\n<tr>\n<td><strong>Maximum Load Capacity<\/strong><\/td>\n<td>200 kg<\/td>\n<td>2,000 kg<\/td>\n<\/tr>\n<tr>\n<td><strong>Single Cycle Time<\/strong><\/td>\n<td>28\u201340 s\/pcs (geometry dependent)<\/td>\n<td>Set by layer count and coil geometry, confirmed per project<\/td>\n<\/tr>\n<tr>\n<td><strong>Ring Rotation Speed<\/strong><\/td>\n<td>Up to 100 r\/min (inverter controlled)<\/td>\n<td>Confirmed per project<\/td>\n<\/tr>\n<tr>\n<td><strong>Overlap Ratio Range<\/strong><\/td>\n<td>10%\u201390% (linear pitch synced)<\/td>\n<td>10%\u201390% (linear pitch synced)<\/td>\n<\/tr>\n<tr>\n<td><strong>Installed Power<\/strong><\/td>\n<td>3.5 kW, 380V, 60Hz, 3-Phase<\/td>\n<td>4.0 kW, 380V, 50Hz, 3-Phase<\/td>\n<\/tr>\n<tr>\n<td><strong>Pneumatic Supply Requirement<\/strong><\/td>\n<td>Not required for the standard cycle<\/td>\n<td>5\u20137 kgf\/cm\u00b2 (filtered, dry clean air)<\/td>\n<\/tr>\n<tr>\n<td><strong>Consumable Roll Sizing<\/strong><\/td>\n<td>Quoted per project against the hose coil geometry<\/td>\n<td>PVC \/ LLDPE \/ PE \/ Paper \/ HDPE: ID 50 mm, OD 100\u2013450 mm, W 100\u2013150 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>Packaging Media Sizing Boundaries and Line Autonomy<\/h3>\n<p>The material carriage capacity directly impacts shop-floor changeover intervals:<\/p>\n<ul>\n<li><strong>FPS-400 Large-Diameter Payoff<\/strong>: Accommodates film, paper, or woven rolls with an outer diameter up to <strong>450 mm<\/strong> and widths of <strong>100\u2013150 mm<\/strong>. A 450 mm OD master roll holds substantially more linear packaging media than standard shop rolls, significantly cutting operator changeover intervals on high-tonnage production lines.<\/li>\n<li><strong>FPH-500W Compact Payoff<\/strong>: The payoff carriage takes a compact film roll matched to the hose coil width, so the lighter shuttle keeps rotational inertia low and acceleration smooth without jerking flexible hoses; roll size is quoted per project.<\/li>\n<li><strong>Inventory Isolation<\/strong>: Do not stage hose-line film rolls on the FPS-400 line, nor the large 450 mm OD \/ 150 mm wide rolls on the hose carriage \u2014 the tension arms and clearance envelopes are matched to each machine&#8217;s own roll geometry.<\/li>\n<\/ul>\n<h2>Worked example: same size, different coil<\/h2>\n<p>Coil Cross-Sectional Area = (\u03c0 \/ 4) \u00d7 (OD\u00b2 &#8211; ID\u00b2)\nArea = (3.1416 \/ 4) \u00d7 (0.80\u00b2 &#8211; 0.508\u00b2) \u2248 0.300 m\u00b2\nTotal Volume = Area \u00d7 Width = 0.300 m\u00b2 \u00d7 0.30 m \u2248 0.090 m\u00b3<\/p>\n<h3>Case A: Rubber Hose Coil (Packaged on FPH-500W)<\/h3>\n<ul>\n<li><strong>Typical Pack Weight<\/strong>: ~<strong>60 kg<\/strong> for the example coil, taken as a stated project figure for this comparison.<\/li>\n<li><strong>Chassis &amp; Loading Route<\/strong>: Manual roll-in or jib hoist from the front opening into the annular ring.<\/li>\n<li><strong>Machine Alignment<\/strong>: 60 kg sits safely within the <strong>20\u2013200 kg<\/strong> capacity of the <strong>FPH-500W<\/strong>.<\/li>\n<li><strong>Kinematic Run<\/strong>: Using 90 mm wide tape at a set 50% overlap, the linear advance pitch along the OD is 45 mm. The 3.5 kW drive system completes the wrapping cycle in <strong>28\u201340 s\/pcs<\/strong> at ring speeds up to 100 r\/min without compressing the elastomeric walls.<\/li>\n<\/ul>\n<h3>Case B: Slit Steel Strip Coil (Packaged on FPS-400)<\/h3>\n<ul>\n<li><strong>Typical Steel Pack Weight<\/strong>: \u2248<strong>707 kg<\/strong> derived from the cross-section above and solid steel at 7,850 kg\/m\u00b3 (0.090 m\u00b3 \u00d7 7,850 kg\/m\u00b3); a real slit coil with tighter coiling lands in the same 700\u2013800 kg band.<\/li>\n<li><strong>Chassis &amp; Loading Route<\/strong>: Direct top-down drop using an overhead shop crane and C-hook.<\/li>\n<li><strong>Machine Alignment<\/strong>: At roughly 700\u2013800 kg the coil far exceeds the FPH-500W frame limit of 200 kg and would overload light centering rollers, so it routes exclusively to the <strong>FPS-400<\/strong> (rated for <strong>100\u20132,000 kg<\/strong>).<\/li>\n<li><strong>Kinematic Run<\/strong>: Powered by the 4.0 kW drive unit with <strong>5\u20137 kgf\/cm\u00b2<\/strong> pneumatic lock verification, the machine utilizes a 150 mm wide LLDPE film roll. At 50% overlap, advance pitch increases to 75 mm, providing rapid containment and structural coil stabilization.<\/li>\n<\/ul>\n<p><a id=\"checklist\"><\/a><\/p>\n<h2>Selection checklist<\/h2>\n<p>Provide the following production and material details to determine the appropriate system configuration:<\/p>\n<ol>\n<li><strong>Core Coil Dimensions<\/strong>: Minimum and maximum ID (\u00d8, mm), OD (\u00d8, mm), and Width (mm).<\/li>\n<li><strong>Total Mass Bounds<\/strong>: Minimum and maximum weight per unit (kg).<\/li>\n<li><strong>Cross-Sectional Rigidity<\/strong>: Rigid steel strip, wire bundle, soft rubber hose, or crush-sensitive plastic tube.<\/li>\n<li><strong>Handling Logistics<\/strong>: Loading via overhead factory crane, jib hoist, counterbalanced forklift, or manual transfer.<\/li>\n<li><strong>Protective Media Specifications<\/strong>: LLDPE stretch film (thickness 20\u201335 \u00b5m), VCI anti-corrosion crepe paper, or woven PP tape.<\/li>\n<li><strong>Production Target<\/strong>: Coils per hour, shift duration, and upstream cut-to-length line synchronization.<\/li>\n<li><strong>Utility Standards<\/strong>: Available shop air pressure (kgf\/cm\u00b2 or MPa) and electrical grid configuration (Voltage, Frequency, Phase).<\/li>\n<\/ol>\n<p><a id=\"safety\"><\/a><\/p>\n<h2>Safety: EN 415-10 and ISO 12100<\/h2>\n<p>Both machines comply with <strong>EN 415-10<\/strong> (Safety of Packaging Machines: General Requirements) and are verified by formal risk assessments in accordance with <strong>ISO 12100:2010<\/strong>.<\/p>\n<ul>\n<li><strong>Perimeter Safeguarding<\/strong>: The high-speed rotating orbital ring is enclosed inside high-visibility steel mesh guards. Breaking the optical plane during an active cycle triggers an immediate safe stop.<\/li>\n<li><strong>Pneumatic Interlock Validation<\/strong>: On the top-opening FPS-400, electrical safety gate switches verify that the locking pins are mechanically seated before the drive inverter can energize the main motor.<\/li>\n<li><strong>Emergency Interventions<\/strong>: Ergonomic, red mushroom-head emergency stop buttons with positive detent are located on both the main frame and the remote operator pendant.<\/li>\n<\/ul>\n<p><a id=\"engineering-faq\"><\/a><\/p>\n<h2>Engineering FAQ<\/h2>\n<p><strong>Q: Can the FPH-500W hose wrapper be used for light steel coils?<\/strong>\nA: Yes, provided the steel coil does not exceed the structural limit of <strong>200 kg<\/strong> and its outer diameter remains within 1,400 mm. However, sharp slit burrs may quickly groove the light-duty polyurethane rollers, so hardened high-durometer PU roll options are recommended.<\/p>\n<p><strong>Q: How does the top-opening frame on the FPS-400 maintain alignment?<\/strong>\nA: The opening upper section features precision-ground locating pins and dual heavy-duty pneumatic clamp jaws. When lowered, proximity sensors verify mechanical closure before enabling the safety circuit, preventing ring binding or drive misalignment.<\/p>\n<p><strong>Q: Why is film overlap higher on the coil inner diameter?<\/strong>\nA: This is an inherent property of toroidal wrapping geometry. Because the inner circumference (\u03c0 \u00d7 ID) is significantly shorter than the outer circumference (\u03c0 \u00d7 OD), an advance pitch set for 50% overlap at the outer perimeter naturally converges inside the bore, creating a thicker, multi-layer protective barrier against internal moisture and abrasion.<\/p>\n<p><strong>Q: Can these machines apply dual-layer materials in a single step?<\/strong>\nA: Yes. An optional dual-material carriage allows simultaneous application of VCI anti-rust paper and protective outer stretch film in a single automated cycle.<\/p>\n<p><a id=\"next-step\"><\/a><\/p>\n<h2>Next step<\/h2>\n<ol>\n<li><strong>Submit Coil Dimensions<\/strong>: Send your minimum\/maximum ID, OD, width, and package weights to <strong>info@fhopepack.com<\/strong>.<\/li>\n<li><strong>Engineering Review<\/strong>: Our packaging team confirms the correct machine frame size, roll width, and roller configuration.<\/li>\n<li><strong>Formal Proposal<\/strong>: Receive an itemized engineering layout, functional specification, and price quotation within <strong>24\u201348 hours<\/strong>.<\/li>\n<\/ol>\n<p><a id=\"related-reading\"><\/a><\/p>\n<h2>Related reading<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fhopepack.com\/Hose-packaging-machine\/Hose-Coil-wrapping-machinery-FPH-500.html\">Hose Coil Wrapping Machinery FPH-500W (Product Specifications)<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Steel-coil-wrapping-machine\/Steel-coil-packine-machine-FPS-400.html\">Steel Coil Packing Machine FPS-400 (Product Specifications)<\/a><\/li>\n<\/ul>\n<p><a id=\"sources\"><\/a><\/p>\n<h2>Sources<\/h2>\n<ul>\n<li>FHOPE Systems: <em>Orbital Ring Packaging Machine Operating &amp; Engineering Guidelines (Series FPH &amp; FPS)<\/em>.<\/li>\n<li>European Committee for Standardization: <em>EN 415-10:2014 \u2014 Safety of packaging machines \u2014 Part 10: General requirements<\/em>.<\/li>\n<li>International Organization for Standardization: <em>ISO 12100:2010 \u2014 Safety of machinery \u2014 General principles for design \u2014 Risk assessment and risk reduction<\/em>.<\/li>\n<li>ASM International: <em>Properties and Densities of Wrought Carbon and Alloy Steels<\/em>.<\/li>\n<\/ul>\n<p><strong>Last reviewed:<\/strong> 2026-11-05<\/p>","protected":false},"excerpt":{"rendered":"<p>Executive summary The FPH-500W wraps flexible rubber and hydraulic hose coils weighing 20\u2013200 kg, utilizing manual front loading and surface-protecting guide rollers. The FPS-400 packs heavy slit steel, wire, and strip coils weighing 100\u20132,000 kg, [&hellip;]<\/p>","protected":false},"author":1,"featured_media":2324,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Hose Pipe Wrapping Machine & Steel Coil Packing | FHOPE","_seopress_titles_desc":"One eye-through principle, two builds: FPH-500W for heavy hose and pipe coils and FPS-400 for steel coils up to 2,000 kg, with a same-size coil example.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[{"_seopress_pro_rich_snippets_type":"none"}],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"default","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[13],"tags":[86,45],"class_list":["post-268","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-steel-coil-wrapping-machine-copper-coil-packing-machine","tag-coil-packing-machines-for-steel","tag-hose-pipe-wrapping-machine"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/268","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=268"}],"version-history":[{"count":13,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/268\/revisions"}],"predecessor-version":[{"id":18285,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/268\/revisions\/18285"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/2324"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=268"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=268"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=268"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}