{"id":18483,"date":"2026-11-19T07:20:39","date_gmt":"2026-11-19T07:20:39","guid":{"rendered":"https:\/\/www.fhopepack.com\/videos\/?p=18483"},"modified":"2026-11-19T08:05:20","modified_gmt":"2026-11-19T08:05:20","slug":"complete-automatic-silicon-steel-coil-packaging-solution","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/complete-automatic-silicon-steel-coil-packaging-solution\/","title":{"rendered":"Complete Automatic Silicon Steel Coil Packaging Solution: Wrapping, Strapping and Stacking Line"},"content":{"rendered":"<p>Silicon steel leaves the slitting or stacking line as a finished electrical product: laminations of 0.23 to 0.35 mm with an insulation coating that a hard roller or a steel strap will scrape off. The coil is valuable, the surface is fragile, and the failure modes are specific \u2014 edge scratching, rust, and inter-layer telescoping during transit. Hand wrapping cannot hold tension evenly on a two-tonne coil, and it cannot keep pace with an upstream slitter.<\/p>\n<p><strong>This complete automatic silicon steel coil packaging line moves each coil on a powered roller bed, wraps it with VCI film over the top face and outer circumference while blocker rollers rotate it, straps the wrapped package with PET band, and stacks the finished coils onto wooden pallets by gantry gripper. The master coil wrapper accepts coils from 800 to 2,000 mm wide, 1,000 to 2,100 mm outer diameter and 2,000 to 30,000 kg.<\/strong><\/p>\n<p>The sections below follow the line in operation order: what each station does to protect the laminations, which materials suit electrical steel, the size envelope of the wrapper, strapping and stacking behaviour, throughput, surface-contact rules, utilities, and the data an RFQ must carry.<\/p>\n<iframe loading=\"lazy\" width=\"1053\" height=\"592\" src=\"https:\/\/www.youtube.com\/embed\/DIcK7yZ1uP0\" title=\"Complete Automatic Silicon Steel Coil Packaging Solution\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<p><a href=\"\/Automatic-Packing-Line\/\">Automatic Packing Line<\/a><\/p>\n<hr \/>\n<h2>Why Does Silicon Steel Demand a Dedicated Packaging Line?<\/h2>\n<p><strong>Silicon steel fails in transit in three specific ways \u2014 scratched insulation coating, rust, and telescoping layers \u2014 and every one of them is caused by contact or moisture that an automated line is designed to eliminate.<\/strong><\/p>\n<p>The laminations are thin: 0.23 to 0.35 mm is foil territory, and the insulation coating on each face is thinner still. A bare steel roller, a nicked strap edge or a hard corner contact scrapes the coating, and the scrap shows up as a lamination short or a core loss problem at the motor or transformer plant, not as visible damage. Rust is the second failure: the coil sits in a container for weeks, and condensation cycles work into the interlayer gaps. The third is telescoping \u2014 loose wraps let the layers slide axially, and a slipped coil is a coil that has to be re-cut.<\/p>\n<p>The economics decide the argument. A rejected silicon steel coil is worth far more than its scrap weight, because the value is in the rolling and the coating, not the steel. A packaging line exists to make the protection repeatable: the same tension, the same overlap, the same number of wraps on every coil, without an operator dragging film around a two-tonne roll.<\/p>\n<hr \/>\n<h2>What Does the Complete Line Look Like?<\/h2>\n<p><strong>The line runs in one direction through four stations: roller-bed infeed, wrapping, strapping and stacking. Each station does one job, and the coil never goes back to manual handling between them.<\/strong><\/p>\n<pre><code>[roller bed infeed] --&gt; [wrapping station] --&gt; [strapping station] --&gt; [stacker \/ pallet bay]<\/code><\/pre>\n<ul>\n<li><strong>Infeed.<\/strong> Powered rollers carry the coil into the processing zone. The roller surfaces are lagged, because the coil rests on them through every station.<\/li>\n<li><strong>Wrapping.<\/strong> The blocker rollers rotate the eye-vertical coil while a gantry-mounted film carriage lays VCI film over the top face and down the outer circumference.<\/li>\n<li><strong>Strapping.<\/strong> A gantry strapping head secures the wrapped coil \u2014 or a palletised stack of coils \u2014 with PET band.<\/li>\n<li><strong>Stacking.<\/strong> A gantry gripper lifts the wrapped coil and places it eye-up onto wooden skids, indexing each layer on a turntable.<\/li>\n<\/ul>\n<p>Nothing in this chain needs an operator to touch film or strap. The only human tasks are loading skids, changing film rolls and reviewing the wrap quality at the outfeed.<\/p>\n<hr \/>\n<h2>How Does the Wrapping Station Protect an Eye-Vertical Coil?<\/h2>\n<p><strong>The station rotates the coil on blocker rollers and wraps it where it stands: a sensor reads the coil size, the carriage is positioned automatically, and a multi-roll shuttle applies VCI film over the eye face and around the circumference.<\/strong><\/p>\n<p>Three mechanisms carry the protection:<\/p>\n<ul>\n<li><strong>Automatic size detection.<\/strong> The wrapping station checks the coil dimensions and positions itself without a manual setup between coil families. A line that runs 900 mm slit coils in the morning and 1,900 mm wide coils after lunch does not stop for a changeover.<\/li>\n<li><strong>Shuttle with 2 to 3 film rolls.<\/strong> The carriage carries two or three rolls for overlap wrapping. Two materials on one pass \u2014 VCI against the metal, stretch film outside \u2014 is what makes the package dustproof as well as decorated.<\/li>\n<li><strong>Tension control.<\/strong> A dedicated tension controller lets the same machine wrap a heavy master coil and a light slit coil without tearing the film or letting it go slack. Tension is the difference between a wrap that protects and a wrap that falls off at the first corner.<\/li>\n<\/ul>\n<p>The blocker-roller arrangement matters for silicon steel specifically. The coil rotates on rollers that contact its outer surface under the film, never on an edge, and the wrap is applied to a coil that is not being lifted, flipped or dragged.<\/p>\n<hr \/>\n<h2>Which Packaging Materials Suit Silicon Steel?<\/h2>\n<p><strong>VCI film against the metal, LLDPE stretch film or PVC outside, and PET for strapping. VCI paper and HDPE woven fabric are the sheet alternatives.<\/strong><\/p>\n<p>The film specification from the wrapper data is exact:<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Item<\/th>\n<th style=\"text-align: left\">Specification<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\">Packing materials<\/td>\n<td style=\"text-align: left\">VCI film \/ LLDPE stretch film \/ PVC<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Film roll ID<\/td>\n<td style=\"text-align: left\">76 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Film roll OD<\/td>\n<td style=\"text-align: left\">100\u2013250 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Film roll width<\/td>\n<td style=\"text-align: left\">200\u2013250 mm (final size confirmed at design)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>VCI film works because the vapour-phase inhibitors migrate from the film and lay down a molecular layer on the steel surface inside the package \u2014 protection that survives a container crossing without a desiccant pack per coil. The overlap rate is set between 20% and 90%: the low end suits a dry domestic leg, the high end a humid export route, and the setting is part of the wrap recipe rather than a hardware change.<\/p>\n<p>For sheet materials, VCI paper is the inner layer and HDPE woven fabric the outer mechanical layer. Both appear on surface-sensitive coil lines, and both are specified per project rather than assumed.<\/p>\n<hr \/>\n<h2>What Coil Sizes Does the Master Coil Wrapper Accept?<\/h2>\n<p><strong>The dual-blocker-roller master coil wrapper is built for the full master-coil range: 800 to 2,000 mm coil width, 1,000 to 2,100 mm outer diameter, 610 to 760 mm inner diameter and 2,000 to 30,000 kg.<\/strong><\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Parameter<\/th>\n<th style=\"text-align: left\">Range<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\">Object material<\/td>\n<td style=\"text-align: left\">Steel coil<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Coil width (W)<\/td>\n<td style=\"text-align: left\">800\u20132,000 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Coil outer diameter (OD)<\/td>\n<td style=\"text-align: left\">1,000\u20132,100 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Coil inner diameter (ID)<\/td>\n<td style=\"text-align: left\">610\u2013760 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Coil weight<\/td>\n<td style=\"text-align: left\">2,000\u201330,000 kg<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Film carriage (shutter) speed<\/td>\n<td style=\"text-align: left\">approx. 2\u20133 m\/s<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Overlap rate<\/td>\n<td style=\"text-align: left\">20%\u201390%<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Two boundaries deserve attention. First, the ID range is fixed at 610\u2013760 mm because the eye is what the blocker rollers and the stacking gripper work with; a coil wound on a 508 mm core is a different handling conversation. Second, the top of the weight range is the structural limit of the line, not a target \u2014 the coils that actually run near 30,000 kg are jumbo master coils, and they set the roller, frame and gripper ratings for everything downstream.<\/p>\n<hr \/>\n<h2>How Is the Wrapped Coil Strapped?<\/h2>\n<p><strong>The strapping station secures the wrapped package with PET band, 12 mm wide and 0.8 to 1.2 mm thick, applied radially; horizontal-axis and vertical-axis heads are both available, with a choice of joint types.<\/strong><\/p>\n<p>PET is the default for a reason. A steel strap against a coated surface is a scoring tool; PET at the same applied tension does not scratch the coating, and its recovery keeps the bundle tight through handling. The radial orientation means the band sits around the outer circumference, clamping the wrap instead of denting an edge.<\/p>\n<p>Cycle time is a planning number: 35 to 38 seconds per strap including rotation and indexing. A four-strap recipe on a palletised stack is therefore in the region of two and a half minutes of strapping per stack, which is why strap count belongs in the throughput calculation and not just in the packaging specification.<\/p>\n<hr \/>\n<h2>How Are Coils Stacked for Despatch?<\/h2>\n<p><strong>A gantry gripper lifts each wrapped coil and places it eye-up onto wooden skids, with a turntable indexing the pallet between placements.<\/strong><\/p>\n<p>The gripper clamps the outer perimeter of the wrapped coil \u2014 the film layer takes the contact, not the laminations \u2014 and sets it down on the skid without a flip. Eye-up stacking is the stable orientation for transport: the coil rests on its flat face, the weight spreads through the skid, and the stack does not try to roll.<\/p>\n<p>The turntable matters more than it looks. Indexing the pallet under the gripper means the operator does not reposition skids with a forklift between coils, and the stack stays square. Finished stacks leave the bay by forklift; the line does not need a conveyor exit if the despatch point is floor-level.<\/p>\n<hr \/>\n<h2>How Fast Does the Line Run?<\/h2>\n<p><strong>The product page rates the general line at up to 60 coils per hour; the honest planning numbers come from the cycle times \u2014 a wrapping cycle of 80 to 150 seconds per coil caps the wrapping station at 24 to 45 coils per hour by itself.<\/strong><\/p>\n<p>The arithmetic:<\/p>\n<pre><code>Wrapping station ceiling = 3600 s \/ cycle time\nAt 150 s: 3600 \/ 150 = 24 coils\/hour\nAt  80 s: 3600 \/  80 = 45 coils\/hour<\/code><\/pre>\n<p>For comparison, surface-sensitive coil lines published by the same manufacturer give slit-coil lines 20 to 35 coils per hour and wide-coil lines 5 to 8 coils per hour, with wrapping cycles of 80 to 150 seconds depending on coil size and overlap. A jumbo coil near the top of the weight range runs at the wide-coil end of that spectrum; the 60 coils per hour claim belongs to light coils with short cycles.<\/p>\n<p>The practical takeaway: match the upstream slitter to the wrapping ceiling, not to the marketing number. A slitter producing 35 coils per hour will queue at a wrapping station that caps at 24, and no amount of roller speed fixes a cycle-time limit.<\/p>\n<hr \/>\n<h2>Which Surface-Contact Rules Protect the Laminations?<\/h2>\n<p><strong>Every surface the coil touches is specified for soft contact: PU or rubber-lagged rollers, PET strap instead of steel band, VCI paper or film against the metal, and optional edge protection confirmed at order review.<\/strong><\/p>\n<p>The rules are short and absolute:<\/p>\n<ul>\n<li><strong>Rollers.<\/strong> Conveyor and blocker rollers are coated with polyurethane or rubber. This is a mandatory specification on surface-sensitive coil lines, not an option.<\/li>\n<li><strong>Strapping.<\/strong> PET replaces steel band everywhere the strap can touch the coil. Where steel strap is unavoidable \u2014 some export specs demand it \u2014 it goes over the wood or the woven fabric layer, never on the laminations.<\/li>\n<li><strong>Inner layer.<\/strong> VCI film or VCI paper is the layer against the metal. Stretch film alone is a dust barrier; VCI is the rust barrier.<\/li>\n<li><strong>Edge protection.<\/strong> Edge protectors and custom contact pads for silicon steel are available but must be confirmed explicitly, because they change the gripper and stacking recipe.<\/li>\n<\/ul>\n<hr \/>\n<h2>What Utilities and Installation Does the Line Need?<\/h2>\n<p><strong>The line runs on approximately 15 kW of connected power at 380 V three-phase five-wire, 140 bar hydraulic pressure and 6 to 8 kgf\/cm\u00b2 compressed air, installed on a flat, reinforced concrete floor.<\/strong><\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Utility<\/th>\n<th style=\"text-align: left\">Requirement<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\">Power<\/td>\n<td style=\"text-align: left\">approx. 15 kW, 380 V, three-phase five-line<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Hydraulic supply<\/td>\n<td style=\"text-align: left\">140 bar<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Air supply<\/td>\n<td style=\"text-align: left\">6\u20138 kgf\/cm\u00b2<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">Installation<\/td>\n<td style=\"text-align: left\">flat ground surface<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The hydraulic circuit carries the strapping and clamping functions; the air circuit carries the pneumatic actuators on the film carriage and the gripper pads. The floor matters more than any single utility: a line that rotates 30-tonne coils and stacks them three-high needs a slab that stays flat, and anchoring is part of the installation scope, not an afterthought.<\/p>\n<hr \/>\n<h2>What Must an RFQ Specify?<\/h2>\n<p><strong>Six inputs size the line: the coil spectrum, the target capacity, the surface-contact rules, the packaging materials, the stacking pattern and the site utilities.<\/strong><\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">#<\/th>\n<th style=\"text-align: left\">Input<\/th>\n<th style=\"text-align: left\">Why it decides the machine<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\">1<\/td>\n<td style=\"text-align: left\">Coil spectrum: width, OD, ID, min\/max weight<\/td>\n<td style=\"text-align: left\">Sets roller pitch, ring size and gripper rating<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">2<\/td>\n<td style=\"text-align: left\">Target capacity and shift pattern<\/td>\n<td style=\"text-align: left\">Sets wrapping cycle budget and station count<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">3<\/td>\n<td style=\"text-align: left\">Surface-contact rules<\/td>\n<td style=\"text-align: left\">PU lagging, PET strap, edge protection<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">4<\/td>\n<td style=\"text-align: left\">Packaging materials<\/td>\n<td style=\"text-align: left\">VCI inner layer, stretch film, woven fabric<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">5<\/td>\n<td style=\"text-align: left\">Stacking pattern<\/td>\n<td style=\"text-align: left\">Eye orientation, skids per stack, turntable indexing<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\">6<\/td>\n<td style=\"text-align: left\">Site utilities<\/td>\n<td style=\"text-align: left\">Power, hydraulic, air, floor spec<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Send the six blocks and the engineering team returns a layout proposal and quotation within 24 hours. The two inputs most often missing are the minimum coil weight \u2014 which decides whether the gripper needs a light-coil mode \u2014 and the strap count per stack, which quietly sets the strapping station cycle.<\/p>\n<hr \/>\n<h2>Related Packaging Solutions<\/h2>\n<ul>\n<li><a href=\"\/Automatic-Packing-Line\/\">Automatic Packing Line<\/a> \u2014 the parent category covering coil, pipe, profile and rod lines.<\/li>\n<li><a href=\"\/Master-coil-wrapper\/\">Master Coil Wrapper<\/a> \u2014 the dual-blocker-roller wrapper family.<\/li>\n<li><a href=\"\/Master-coil-wrapper\/automatic-packing.html\">Stainless master steel coil packing machine<\/a> \u2014 master coil packing and stretch wrapper product page.<\/li>\n<li><a href=\"\/Master-coil-wrapper\/Automatic-Packing-Line.html\">Master steel coil packing machine<\/a> \u2014 the wrapper specified in this article.<\/li>\n<li><a href=\"\/Master-coil-wrapper\/aluminum-master.html\">Aluminum master coil wrapper<\/a> \u2014 jumbo aluminum coil variant.<\/li>\n<li><a href=\"\/steel-coil-strapping-machinery\/\">Steel coil strapping machinery<\/a> \u2014 radial and circumference strapping machines.<\/li>\n<li><a href=\"\/Coil_packing_machine.html\">Coil packing machine<\/a> \u2014 general coil packing equipment.<\/li>\n<\/ul>\n<hr \/>\n<h2>Conclusion<\/h2>\n<p>The packaging decision for silicon steel is a contact decision. Every place the line touches the coil \u2014 rollers, strap, gripper pads, skids \u2014 is specified for soft contact, and the VCI layer is what turns a dust cover into rust protection. The wrapper envelope of 800\u20132,000 mm width, 1,000\u20132,100 mm OD and 2,000\u201330,000 kg covers the master-coil range; a wrapping cycle of 80 to 150 seconds is the number that actually sets throughput.<\/p>\n<p>Match the line to the coil spectrum, confirm the strap count and the edge protection at order review, and the same line that wraps a 900 mm slit coil in the morning will wrap a 1,900 mm jumbo after lunch without a changeover. Send the six RFQ blocks with a plant layout to get a sized proposal within 24 hours.<\/p>","protected":false},"excerpt":{"rendered":"<p>Silicon steel leaves the slitting or stacking line as a finished electrical product: laminations of 0.23 to 0.35 mm with an insulation coating that a hard roller or a steel strap will scrape off. The [&hellip;]<\/p>","protected":false},"author":4,"featured_media":18484,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[1],"tags":[273],"class_list":["post-18483","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-coiling-machine","tag-automatic-packing-line"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/18483","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=18483"}],"version-history":[{"count":2,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/18483\/revisions"}],"predecessor-version":[{"id":18489,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/18483\/revisions\/18489"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/18484"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=18483"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=18483"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=18483"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}