{"id":17195,"date":"2026-10-19T15:37:20","date_gmt":"2026-10-19T15:37:20","guid":{"rendered":"https:\/\/www.fhopepack.com\/videos\/top-coil-packing-line-of-2026-year-end-summary\/"},"modified":"2026-10-19T15:37:20","modified_gmt":"2026-10-19T15:37:20","slug":"top-coil-packing-line-of-2026-year-end-summary","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/top-coil-packing-line-of-2026-year-end-summary\/","title":{"rendered":"Top Coil Packing Line of 2026 | Year-End Summary"},"content":{"rendered":"<p><strong>Executive summary.<\/strong> If your 2026 budget question is &#8220;which coil packing line is the best,&#8221; the answer is not a single machine \u2014 it is the one that matches your <strong>coil class<\/strong> (slit, standard, heavy PP-GI, or non-ferrous) and your <strong>required scope<\/strong> (wrap only, or wrap + strap + weigh + stack). [1]<\/p>\n<p>This summary maps FHOPE&#8217;s published line options for those two inputs, gives the published size and rate references for each, and ends with a checklist you can hand to a builder. All figures below are manufacturer-published references, not per-project guarantees.<\/p>\n<iframe loading=\"lazy\" width=\"940\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/cqQzkPq6VMI?rel=0\" title=\"Steel Coil Packaging Line and Packaging System (FHOPE)\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<p>The embedded video accompanies this summary as context. The ratings, sizes and rates below come from the linked FHOPE product pages; the clip does not establish a coil rating or confirm which stations are included in an order.<\/p>\n<h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ul>\n<li><a href=\"#what-makes-a-line-top-in-2026\">What makes a line &#8220;top&#8221; in 2026<\/a><\/li>\n<li><a href=\"#line-map-by-coil-class\">Line map: start with coil class, then scope<\/a><\/li>\n<li><a href=\"#published-references\">Published references: sizes, rates and throughput<\/a><\/li>\n<li><a href=\"#where-a-full-line-helps\">Where a full line earns its cost<\/a><\/li>\n<li><a href=\"#when-not-to-buy-a-full-line\">When not to buy a full line<\/a><\/li>\n<li><a href=\"#engineering-faq\">Engineering FAQ<\/a><\/li>\n<li><a href=\"#rfq-checklist\">2026 RFQ checklist<\/a><\/li>\n<li><a href=\"#next-step\">Next step<\/a><\/li>\n<li><a href=\"#related-reading\">Related reading<\/a><\/li>\n<li><a href=\"#sources\">Sources and standards<\/a><\/li>\n<\/ul>\n<h2 id=\"what-makes-a-line-top-in-2026\">What makes a line &#8220;top&#8221; in 2026<\/h2>\n<p>A year-end list of &#8220;top coil packing lines&#8221; is only useful if it names the boundary of every entry. FHOPE&#8217;s coil-line family is organized by <strong>process and coil class<\/strong>, not by a single headline tonnage. The practical ranking questions for a buyer are:<\/p>\n<ul>\n<li>What is my coil envelope \u2014 diameter, inner diameter, width, weight?<\/li>\n<li>What must happen after wrapping \u2014 strapping, weighing, labeling, stacking, or dispatch?<\/li>\n<li>What throughput does my slitting or finishing line actually feed?<\/li>\n<\/ul>\n<p>Answering those three picks a line better than asking &#8220;which machine is the most powerful.&#8221; The rest of this summary turns the three answers into a line choice.<\/p>\n<h2 id=\"line-map-by-coil-class\">Line map: start with coil class, then scope<\/h2>\n<table>\n<thead>\n<tr>\n<th>If your coil class is\u2026<\/th>\n<th>Use FHOPE&#8217;s published\u2026<\/th>\n<th>Scope drivers to add<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Slit coil (100\u20133000 kg)<\/td>\n<td><a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/Steel-Coil-Packaging-line.html\">Slit coil packaging line<\/a><\/td>\n<td>wrapping only, or wrapping + stacking<\/td>\n<\/tr>\n<tr>\n<td>Narrow slit coil (20\u2013350 mm wide)<\/td>\n<td><a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/automatic-slit-coil-packaging-system.html\">Automatic slit coil packaging system<\/a><\/td>\n<td>down-ending and horn handling for narrow cores<\/td>\n<\/tr>\n<tr>\n<td>Standard steel coil (1\u201325 t)<\/td>\n<td><a href=\"https:\/\/www.fhopepack.com\/Coil_packing_machine.html\">Coil packing machine<\/a><\/td>\n<td>add strapping, weighing, stacking per plant<\/td>\n<\/tr>\n<tr>\n<td>Heavy \/ PP-GI coil (1\u201330 t)<\/td>\n<td><a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/PPGI-Coils-Packaging-line.html\">PP-GI coil packaging line<\/a><\/td>\n<td>powered turnstile where eye-vertical banding is needed<\/td>\n<\/tr>\n<tr>\n<td>Copper \/ non-ferrous coil<\/td>\n<td><a href=\"https:\/\/www.fhopepack.com\/Copper-Coil-Packing-Line\/\">Copper coil packing line<\/a><\/td>\n<td>surface-protection handling, lighter class<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Two published facts keep this map honest. A <strong>full line<\/strong> joins coil handling, wrapping, strapping and stacking so that slit-coil output flows to the warehouse automatically; a <strong>single machine<\/strong> covers only the wrapping or strapping step. [1] The table below records figures per station, so a buyer does not mistake a stacker rating for a whole-line rating.<\/p>\n<h2 id=\"published-references\">Published references: sizes, rates and throughput<\/h2>\n<p>The following values are FHOPE&#8217;s published references on the linked product pages; each is a planning input, not a committed order specification.<\/p>\n<table>\n<thead>\n<tr>\n<th>Line class<\/th>\n<th>Published reference<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Slit coil line<\/td>\n<td>coil weight 100\u20133000 kg; OD 900\u20131400 mm; ID 508 mm; width 15\u2013450 mm; 20\u201330 coils\/h [2]<\/td>\n<\/tr>\n<tr>\n<td>Automatic slit coil packaging system<\/td>\n<td>min coil width 20\u2013350 mm; horn travel about 1800 mm (3.0 kW); down-ending cycle about 60 s; stacking to 6000 kg\/pallet [3]<\/td>\n<\/tr>\n<tr>\n<td>Heavy \/ PP-GI line<\/td>\n<td>engineered for 1\u201330 t coils; slitting line 20\u201335 coils\/h; wide coil line 5\u20138 coils\/h [4]<\/td>\n<\/tr>\n<tr>\n<td>Cold-roll strapping line<\/td>\n<td>slitting coils 20\u201340 coils\/h; heavy duty 5\u20138 coils\/h; single strap about 35\u201338 s [5]<\/td>\n<\/tr>\n<tr>\n<td>Copper coil line<\/td>\n<td>OD 600\u20131000 mm; ID 344\u2013400 mm; width 20\u2013200 mm; up to 500 kg [6]<\/td>\n<\/tr>\n<tr>\n<td>Coil packing machine range<\/td>\n<td>coil width 600\u20132000 mm; OD 900\u20132200 mm; 1\u201325 t [7]<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>Stations with their own published figures.<\/strong> A full line is built from independent stations, each with its own rating. Published references include a fork-arm stacker rated to about 6 t at 70\u2013120 s per coil with stack heights of 600\u20131200 mm, and an arm-type stacker with pallet centering of 0\u20133 mm. [8] A turnstile can be built with 2 or 4 arms, rated to 60 t with a 2000 mm arm length for eye-vertical coil banding. [9]<\/p>\n<p>As a throughput planning guide, FHOPE publishes 20\u201330 coils\/h on the slit coil line and 20\u201335 coils\/h on the PP-GI slitting line. It lists 20\u201340 coils\/h on the cold-roll slitting line, with wide-coil\/heavy lines at 5\u20138 coils\/h. [2][4][5] Marketing copy across the line pages also references high throughput up to 60 coils per hour. [2] Your actual rate depends on the coil mix, per-station cycle times, and how the line is fed.<\/p>\n<h2 id=\"where-a-full-line-helps\">Where a full line earns its cost<\/h2>\n<p>A full line pays back where three conditions are true at once. Coils are heavy enough that manual handling is the bottleneck or a safety risk. The packing step is on the critical path of a slitting or finishing line. The plant runs enough shifts to amortize automation.<\/p>\n<p>FHOPE publishes four reasons a full line is chosen. [1] It handles different coil sizes efficiently. It keeps trackable data linked to ERP\/MES from packing to stocking. It protects the surface and straps for the transit mode. It keeps people away from heavy coil movements.<\/p>\n<p>Where the plant already runs an ERP or MES system, the line can log each step so a coil&#8217;s packing history travels with it. [1] That matters less for a shop wrapping a few coils per day, and more for a service center feeding a warehouse.<\/p>\n<h2 id=\"when-not-to-buy-a-full-line\">When not to buy a full line<\/h2>\n<p>Buy a single machine or a shorter line when any of these is true:<\/p>\n<ul>\n<li>The coil mix is a single, stable size and the shop already handles, stacks, and ships by forklift.<\/li>\n<li>Planned throughput is a few coils per shift and manual wrapping is not a bottleneck.<\/li>\n<li>The plant floor has no room, or no need, for a conveyor of wrappers, stackers and gantries.<\/li>\n<\/ul>\n<p>None of these is a quality judgment \u2014 a machine-rated wrapper (coil width 600\u20132000 mm, OD 900\u20132200 mm, 1\u201325 t) [7] is the right scope for many mills. A full line is the right scope specifically when coil flow, data, and labor each justify it. The final scope is configured per project against the plant&#8217;s coil envelope and shift plan.<\/p>\n<h2 id=\"engineering-faq\">Engineering FAQ<\/h2>\n<p>Q: What coil weight can a 2026 coil packing line actually take?\nA: It depends on the line class: slit lines are published at 100\u20133000 kg per coil, the single-machine range at 1\u201325 t, and the heavy PP-GI class up to about 30 t. [2][7] Pick the class that covers your heaviest coil, then confirm envelope and load ratings per project.<\/p>\n<p>Q: Is &#8220;up to 60 coils per hour&#8221; a guarantee I will get?\nA: No. That phrase is marketing copy on several line pages. [2] Published line speeds are 20\u201330 coils\/h (slit), 20\u201335 (PP-GI slitting), 20\u201340 (cold-roll slitting) and 5\u20138 coils\/h (wide\/heavy). [2][4][5] The guaranteed rate is agreed per project from your coil mix and station cycle times.<\/p>\n<p>Q: Do I need strapping inside the same line as wrapping?\nA: Only if your transit requires it. Published line groups range from wrapping + stacking to wrapping + strapping + weighing + labeling + pallet distribution. [1] PET or steel strapping provides rigid restraint over long or overseas transit; stretch film alone protects the surface. Specify the strapping per transit route.<\/p>\n<p>Q: How does a turnstile fit into the line?\nA: A turnstile (2 or 4 arms, rated 60 t, 2000 mm arm length [9]) turns a coil to eye-vertical before banding. It is a station, not a whole line: its rating does not set the wrapper&#8217;s rating.<\/p>\n<p>Q: Can controls match my plant standard?\nA: Yes, by selection. FHOPE offers PLCs from Siemens, Allen-Bradley, Mitsubishi and Omron, with HMIs such as Siemens Comfort, Weinview, Proface and AB PanelView. Drives come from Delta, Schneider, Siemens, Yaskawa and Allen-Bradley, and gear motors from SEW, ABB, Siemens and NORD. [1] The exact set is selected to the plant standard per project.<\/p>\n<h2 id=\"rfq-checklist\">2026 RFQ checklist<\/h2>\n<p>Before you invite bids for a 2026 coil packing line, put these in writing:<\/p>\n<ul>\n<li>Coil envelope: min\/max OD, inner diameter, width, weight; the coil that dominates your volume.<\/li>\n<li>Scope: wrap only; wrap + strap; wrap + strap + weigh + label; full line to stacking.<\/li>\n<li>Throughput target: coils per hour at the packing station, fed from which upstream line.<\/li>\n<li>Control preference: PLC, HMI, drive and motor brands already standard in your plant.<\/li>\n<li>Material\/transit: stretch film or VCI, and whether strapping must be PP or steel for the routing.<\/li>\n<li>Feed and interface: crane, downender, coil car, or conveyor; floor layout and available space.<\/li>\n<\/ul>\n<p>Send the same sheet to two builders and compare the equipment list and per-station ratings, not just the headline price.<\/p>\n<h2 id=\"next-step\">Next step<\/h2>\n<p>Use the <a href=\"https:\/\/www.fhopepack.com\/Contact-Us.html\">FHOPE contact page<\/a> to send this article&#8217;s checklist with your coil envelope and scope. Ask for a process drawing and per-station load ratings for the proposed order. The video above gives a visual sense of a steel coil packaging line; the written references in this summary are the basis for your specification.<\/p>\n<h2 id=\"related-reading\">Related reading<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/industrial-steel-coil-packaging-line-configurations-adapting-systems-for-slit-standard-and-heavy-gauge-coils\/\">Industrial Steel Coil Packaging Line Configurations: Adapting Systems for Slit, Standard, and Heavy-Gauge Coils<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/steel-coil-inverter-upender-coil-upending-machine\/\">Steel Coil Inverter \/ Upender \u2014 Coil Upending Machine<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/workshop-demonstration-heavy-duty-horizontal-line-downward-vertical-wrapping-for-steel-coils\/\">Workshop Demonstration: Heavy-Duty Horizontal Line with Downward Vertical Wrapping for Steel Coils<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/prevent-coil-moisture-transit-damage-advanced-horizontal-and-vertical-strip-wrapping-solutions\/\">Prevent Coil Moisture and Transit Damage: Advanced Horizontal and Vertical Strip Wrapping Solutions<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/in-line-wrapping-technology-for-cold-rolled-steel-coils-how-it-works\/\">In-Line Wrapping Technology for Cold Rolled Steel Coils: How It Works<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/\">Automatic Coil Packing Line<\/a><\/li>\n<\/ul>\n<h2 id=\"sources\">Sources and standards<\/h2>\n<ul>\n<li>[1] FHOPE, <a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/\">Automatic Coil Packing Line<\/a>. Accessed 2026-10-20. Line-vs-single-machine framing; &#8220;reasons for coil packing line&#8221; engineering section; control brand options.<\/li>\n<li>[2] FHOPE, <a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/Steel-Coil-Packaging-line.html\">Steel Coil Packaging Line<\/a>. Accessed 2026-10-20. Spec table: coil weight 100\u20133000 kg; OD\/ID\/width; 20\u201330 coils\/h; &#8220;High Throughput Up to 60 coils per hour&#8221;.<\/li>\n<li>[3] FHOPE, <a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/automatic-slit-coil-packaging-system.html\">Automatic Slit Coil Packaging System<\/a>. Accessed 2026-10-20. Min coil width 20\u2013350 mm; horn travel about 1800 mm (3.0 kW); cycle 60 s; 6000 kg\/pallet.<\/li>\n<li>[4] FHOPE, <a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/PPGI-Coils-Packaging-line.html\">PP-GI Coils Packaging Line<\/a>. Accessed 2026-10-20. 1\u201330 t; slitting line 20\u201335 coils\/h; wide coil 5\u20138 coils\/h.<\/li>\n<li>[5] FHOPE, <a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/cold-roll-steel-coil-strapping-packing-line.html\">Cold Roll Steel Coil Strapping &amp; Packing Line<\/a>. Accessed 2026-10-20. Slitting 20\u201340 coils\/h; heavy duty 5\u20138 coils\/h; single strap 35\u201338 s.<\/li>\n<li>[6] FHOPE, <a href=\"https:\/\/www.fhopepack.com\/Copper-Coil-Packing-Line\/\">Copper Coil Packing Line<\/a>. Accessed 2026-10-20. OD 600\u20131000 mm; ID 344\u2013400 mm; width 20\u2013200 mm; up to 500 kg.<\/li>\n<li>[7] FHOPE, <a href=\"https:\/\/www.fhopepack.com\/Coil_packing_machine.html\">Coil Packing Machine<\/a>. Accessed 2026-10-20. Single-unit range 600\u20132000 mm width, OD 900\u20132200 mm, 1\u201325 t.<\/li>\n<li>[8] Published stacker references: fork-arm stacker max 6 t, 70\u2013120 s per coil, stack height 600\u20131200 mm; arm-type stacker pallet centering 0\u20133 mm (FHOPE <a href=\"https:\/\/www.fhopepack.com\/Automatic_Coil_packing_machinery.html\">Automatic Coil Packing Machinery<\/a>). Accessed 2026-10-20.<\/li>\n<li>[9] Turnstile reference: 2\/4 arms, 60 t, 2000 mm arm length (as published in the <a href=\"https:\/\/www.fhopepack.com\/Steel-coil-wrapping-machine\/\">Steel Coil Wrapping Machine<\/a> line documentation). Accessed 2026-10-20.<\/li>\n<li>Standards: machine safety and control of machinery should follow the applicable IEC\/ISO safety and control standards agreed with the builder for each project; no specific certification is claimed in this summary.<\/li>\n<\/ul>\n<p><strong>Last reviewed:<\/strong> 2026-10-20 (source text checked; draft revised).<\/p>","protected":false},"excerpt":{"rendered":"<p>Executive summary. If your 2026 budget question is &#8220;which coil packing line is the best,&#8221; the answer is not a single machine \u2014 it is the one that matches your coil class (slit, standard, heavy [&hellip;]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Top Coil Packing Line of 2026","_seopress_titles_desc":"Compare FHOPE's published coil packing lines for 2026 by coil class and scope, with published references and an RFQ checklist.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-17195","post","type-post","status-publish","format-standard","hentry","category-coiling-machine"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/17195","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=17195"}],"version-history":[{"count":0,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/17195\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=17195"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=17195"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=17195"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}