{"id":15397,"date":"2026-09-18T02:44:04","date_gmt":"2026-09-18T02:44:04","guid":{"rendered":"https:\/\/www.fhopepack.com\/videos\/?p=15397"},"modified":"2026-09-19T01:13:02","modified_gmt":"2026-09-19T01:13:02","slug":"inside-the-shop-floor-streamlining-slit-coil-upending-handling-and-wrapping-automation","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/inside-the-shop-floor-streamlining-slit-coil-upending-handling-and-wrapping-automation\/","title":{"rendered":"Inside the Shop Floor: Streamlining Slit Coil Upending, Handling, and Wrapping Automation"},"content":{"rendered":"<blockquote>\n<p><strong>Executive summary:<\/strong> This review covers a manufacturer clip behind the article titled <strong>&#8220;Inside the Shop Floor: Streamlining Slit Coil Upending, Handling, and Wrapping Automation&#8221;<\/strong> \u2014 a <strong>slit steel coil handling and packaging line<\/strong> in a factory hall where <strong>horizontal slit coils are moved, upended, and stretch-wrapped in clear film<\/strong>, with an <strong>upending machine<\/strong>, <strong>conveyor and turning stations<\/strong>, and a <strong>steel strapping station<\/strong> visible in sampled frames. Sampled every few seconds across the roughly 61-second clip (21 still frames), the footage repeatedly shows <strong>slit coils being transported, upended between horizontal and vertical orientations, and film-wrapped<\/strong>, with an operator present in several shots and Chinese quality slogans on the walls. Two honest qualifications matter up front. First, <strong>branding is inconsistent<\/strong>: the most legible read, &#8220;FHOPE&#8221;, appears on one machine (f_020), but other frames produced HOPE, TROPE, and FHOPEE-style garbles, so <strong>no model-level machine-brand claim is made<\/strong> \u2014 FHOPE is named only as the site and vendor behind the article. Second, <strong>the &#8220;streamlining&#8221; and &#8220;automation&#8221; framing is not measurable from stills<\/strong> \u2014 no before\/after, no cycle-time figure, and no documented labor change appear on camera, so those benefits are flagged for verification rather than stated as facts. The clip demonstrates slit coil handling (transport, upending, turning) and film wrapping inside a factory hall; it does not prove a measured streamlining improvement, a rated throughput, or a fully unmanned line.<\/p>\n<\/blockquote>\n<iframe loading=\"lazy\" width=\"1053\" height=\"592\" src=\"https:\/\/www.youtube.com\/embed\/egA73UcC2DY\" title=\"Slit Steel Coil Upending, Handling and Wrapping Packaging Line\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<p><a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/\">https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/<\/a><\/p>\n<p>This review is written for plant managers, production planners, and buyers who run slit coils and are comparing a handling-and-wrapping line against manual upending, pallet wrapping, or separate wrap lines. It documents what this clip actually demonstrates frame by frame, what it conspicuously does not show, and the exact data and evidence to request from the supplier before quoting.<\/p>\n<h2>What the video shows<\/h2>\n<p>The footage is a shop-floor tour of a <strong>slit coil handling and wrapping line<\/strong>:<\/p>\n<ul>\n<li><strong>Coil transport and handling.<\/strong> Horizontal slit coils travel on roller conveyors and are handled by machine stations with yellow arms and gantries \u2014 the &#8220;handling&#8221; operation is genuinely visible throughout.<\/li>\n<li><strong>Upending and turning stations.<\/strong> A machine labeled with the phrase <strong>&#8220;coil handling and upending machine&#8221;<\/strong> appears in several frames (handling a horizontal coil with a full visible upender), a <strong>conveyor\/turn station<\/strong> rotates or re-orients coils, and other frames show machines <strong>handling vertical coils<\/strong> \u2014 upending between orientations is demonstrated in part.<\/li>\n<li><strong>Film wrapping is the dominant operation.<\/strong> Clear and yellow-tinted stretch film is applied to horizontal coils at the wrapping stations; wrapped coils move onto the conveyor.<\/li>\n<li><strong>Stacking on the conveyor.<\/strong> Several frames show coils <strong>stacked or accumulated on the roller conveyor<\/strong> after wrapping.<\/li>\n<li><strong>A steel strapping station.<\/strong> Steel strapping bands appear at a <strong>strapping station<\/strong> in a couple of frames, and a later frame shows steel bands being applied \u2014 strapping is visible but occupies a small share of the footage.<\/li>\n<li><strong>FHOPE-family branding on one machine.<\/strong> The phrase &#8220;FHOPE&#8221; is legible on a wrapping machine in one frame, and a coil label reads with words like &#8220;PACKING SOLUTION FOR YOU&#8221;; other nameplate reads (HOPE, TROPE, FHOPEE) are garbled variants.<\/li>\n<li><strong>Factory-floor setting.<\/strong> Chinese quality slogans (a phrase about quality building reputation) and machine warning signs appear on the walls and equipment, placing the line in the manufacturer&#8217;s own hall.<\/li>\n<li><strong>Operators are intermittent.<\/strong> An operator stands at a control station in some frames; most frames show the line with nobody in view.<\/li>\n<\/ul>\n<p>The repeatable message of the footage is that <strong>slit coils are transported, upended\/turned, and stretch-wrapped on a powered line inside a factory hall, with a steel strapping station present, intermittent staffing, and branding that reads as a family of variants rather than one clean nameplate<\/strong>.<\/p>\n<h2>Direct observation notes<\/h2>\n<p>These points stay close to the visual evidence:<\/p>\n<ul>\n<li><strong>Handling is shown<\/strong>: conveyors, machine arms, and gantry stations move horizontal slit coils.<\/li>\n<li><strong>Upending is shown<\/strong>: a machine labeled &#8220;coil handling and upending machine&#8221; handles coils, and other frames show machines handling vertical coils and a conveyor\/turn station \u2014 upending is demonstrated in part.<\/li>\n<li><strong>Wrapping is the most repeated operation<\/strong>: clear\/yellow stretch film applied to horizontal coils.<\/li>\n<li><strong>Strapping is visible but minor<\/strong>: steel bands at a strapping station appear in a couple of frames.<\/li>\n<li><strong>Stacking on the conveyor<\/strong> appears in several frames, though no full palletizer is confirmed.<\/li>\n<li><strong>&#8220;Streamlining&#8221;\/&#8221;automation&#8221; benefits are not measured<\/strong>: no before\/after, no cycle-time, no labor data, and no throughput figure appear in the footage.<\/li>\n<li><strong>Branding is inconsistent<\/strong>: the best legible read is &#8220;FHOPE&#8221; on one machine, but other frames read HOPE, TROPE, or FHOPEE-style garbles \u2014 so <strong>no model-level machine-brand claim is made<\/strong>; FHOPE is named only as the site and vendor.<\/li>\n<li><strong>No readable specification anywhere<\/strong>: no coil size range, speed, cycle time, film count, or PLC figure is legible.<\/li>\n<li><strong>Staffing varies on camera<\/strong>: some frames show one operator, most show none.<\/li>\n<li>All frames are <strong>stills sampled every few seconds<\/strong>: they prove the presence and classes of handling, upending, transport, wrapping, and some strapping \u2014 not a measured streamlining outcome, a rated output, or a fixed manning level.<\/li>\n<\/ul>\n<h2>What the title claims vs what the footage proves<\/h2>\n<table>\n<thead>\n<tr>\n<th>Claim (title)<\/th>\n<th>Visible in footage?<\/th>\n<th>Verdict<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Inside the Shop Floor<\/td>\n<td>Factory hall tour with machines, conveyors, wall slogans<\/td>\n<td>Setting demonstrated<\/td>\n<\/tr>\n<tr>\n<td>Streamlining<\/td>\n<td>No before\/after, no time study, no process data on camera<\/td>\n<td>Not demonstrable \u2014 verify with supplier<\/td>\n<\/tr>\n<tr>\n<td>Upending<\/td>\n<td>&#8220;Coil handling and upending machine&#8221;, vertical coil handling, turn station<\/td>\n<td>Demonstrated in part<\/td>\n<\/tr>\n<tr>\n<td>Handling<\/td>\n<td>Conveyors, arms, gantries moving coils<\/td>\n<td>Demonstrated<\/td>\n<\/tr>\n<tr>\n<td>Wrapping<\/td>\n<td>Clear\/yellow stretch film on horizontal coils, repeated<\/td>\n<td>Demonstrated<\/td>\n<\/tr>\n<tr>\n<td>Automation<\/td>\n<td>Powered self-running handling\/wrapping in the filmed shots<\/td>\n<td>Machine-powered run shown; PLC\/full-automation and benefit not proven<\/td>\n<\/tr>\n<tr>\n<td>Slit coils<\/td>\n<td>Horizontal slit-type coils wrapped in film<\/td>\n<td>Product class by context; consistent with title<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The footage reliably demonstrates <strong>coil handling, upending in part, and film wrapping of slit coils inside a factory hall<\/strong>, with a strapping station present \u2014 but never a measured streamlining benefit, a readable specification, a clean machine nameplate, or a fixed automation level.<\/p>\n<h2>What the video does not show<\/h2>\n<p>For a buying decision, the following are <strong>not observable<\/strong> in the footage and must be confirmed with the manufacturer:<\/p>\n<table>\n<thead>\n<tr>\n<th>Missing information<\/th>\n<th>Why it matters<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Streamlining \/ productivity data<\/td>\n<td>The title&#8217;s benefit claim has no time study, before\/after, or throughput data on camera<\/td>\n<\/tr>\n<tr>\n<td>Machine brand and model<\/td>\n<td>Nameplate reads are inconsistent (FHOPE legible once, then HOPE\/TROPE\/FHOPEE-type garbles), so the maker\/model is unconfirmed<\/td>\n<\/tr>\n<tr>\n<td>Full four-operation flow<\/td>\n<td>Wrapping is dominant; upending is partial and strapping occupies only a few frames \u2014 the full sequence and its sequence controller need confirming<\/td>\n<\/tr>\n<tr>\n<td>Coil size and weight range<\/td>\n<td>Whether your slit coil mix fits the upender, conveyors, and wrapper<\/td>\n<\/tr>\n<tr>\n<td>Wrapping speed and cycle time<\/td>\n<td>Line throughput for your production volume<\/td>\n<\/tr>\n<tr>\n<td>Strapping details<\/td>\n<td>Whether the line straps, strap gauge\/grade, and how coils are indexed to the strapping station<\/td>\n<\/tr>\n<tr>\n<td>Film type, thickness, and film-per-coil<\/td>\n<td>Wrap quality and consumable cost<\/td>\n<\/tr>\n<tr>\n<td>Control system \u2014 PLC, HMI, and integration<\/td>\n<td>Automation level and connection to your line\/MES<\/td>\n<\/tr>\n<tr>\n<td>Operator workflow and staffing<\/td>\n<td>Some shots show an operator; most run empty; real manning needs confirming<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The clip never shows a readable nameplate, a legible spec plate, a time study, or a consistent operator headcount. The streamlining and automation benefits are supplier description, not confirmed by the footage; treat them as unverified until the manufacturer&#8217;s datasheet and production data confirm them.<\/p>\n<h2>How the filmed line works, as filmed<\/h2>\n<p>Reading the sampled frames in sequence gives a working picture: <strong>horizontal slit coils enter on roller conveyors<\/strong> and are <strong>handled by machine stations<\/strong> \u2014 one machine picks up and <strong>upends<\/strong> a coil between horizontal and vertical orientation, others <strong>turn or re-orient<\/strong> coils on the conveyor, and the <strong>wrapping stations apply clear\/yellow stretch film<\/strong> to the coils; a <strong>strapping station<\/strong> with steel bands sits along the line, and wrapped coils accumulate on the outfeed conveyor. Staff presence is <strong>intermittent on camera<\/strong> \u2014 an operator is visible at a control station in some shots but most frames run unattended. Because all frames are stills sampled over a short clip, the video proves the <strong>presence and visible classes of the handling, upending, turning, and wrapping equipment, the coils, the film, some strapping, and the factory setting<\/strong> \u2014 but not the sequencing logic, the wrap quality, the strapping parameters, the line speed, the rated capacity, or the true benefit of &#8220;streamlining.&#8221; Request a full-length, uninterrupted run of one coil from infeed to wrapped outfeed (with the upend and strapping steps included on the transition on camera), state your coil sizes, weights, daily volumes, and whether you need strapping in the loop, and ask the supplier to confirm the maker and model, datasheet, capacity and size range, wrapping speed and cycle time, film usage, strapping details, the control system and integration, power and footprint, the real operator staffing, and any measured streamlining or productivity data behind the article&#8217;s claims.<\/p>\n<h2>Where &#8220;Inside the Shop Floor: \u2026Upending, Handling, and Wrapping Automation&#8221; stands in the footage<\/h2>\n<p>The article title promises an inside-the-shop-floor view of streamlining slit coil upending, handling, and wrapping. The footage supports <strong>the operations themselves<\/strong>: <strong>handling is shown<\/strong>, <strong>upending is shown in part<\/strong> (a labeled upending machine plus vertical-coil handling and a turn station), and <strong>wrapping is the dominant, repeated operation<\/strong>, all inside a factory hall \u2014 the &#8220;inside the shop floor&#8221; framing is fair. The honest corrections are the bits the footage cannot confirm: <strong>&#8220;streamlining&#8221; and the implied benefits are not measured<\/strong> (no time study, before\/after, or throughput data appears), <strong>no readable brand or model appears<\/strong> (the most legible read is &#8220;FHOPE&#8221; on one machine, with other frames producing HOPE\/TROPE\/FHOPEE garbles \u2014 so no model claim is made and FHOPE is kept only as site\/vendor), <strong>no specification or control figure is legible<\/strong> (so cycle-time, speed, and automation-level claims are dropped), <strong>strapping is only a few frames<\/strong> (so it is mentioned, not emphasized), and <strong>staffing varies on camera<\/strong> (so no fixed manning claim is made). This review therefore describes the handling, upending (in part), and wrapping operations, the shop-floor setting, the intermittent operators, and the variable branding accurately, does not claim a measurement, a model, or an automation level, and sends every productivity and technical figure to the manufacturer&#8217;s datasheet.<\/p>\n<h2>Buyer&#8217;s verification checklist<\/h2>\n<p>Use this as a short pre-order checklist for a slit coil handling, upending, and wrapping line:<\/p>\n<ul>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Ask for the measured data behind &#8220;streamlining&#8221; \u2014 time studies, before\/after coil-per-day, and labor figures; none appear in the footage.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Confirm the maker, model, and datasheet behind the clip \u2014 the only clean read is &#8220;FHOPE&#8221; on one machine, so verify the actual machine model.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Confirm the coil size and weight range, including the upender&#8217;s capacity.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Ask for the wrapping speed and cycle time per coil, and whether strapping is included in the cycle.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Ask which film types, thicknesses, and film-per-coil figures apply, and the strapping gauge\/grade if strapping is in scope.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Ask whether upending is automatic and how coils are indexed between upend, turn, wrap, and strap stations.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Request the control system (PLC brand, HMI) and line\/MES integration options.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Request power supply requirements and the line footprint.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Confirm the real operator workflow and staffing for loading, supervision, and offloading.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Request a full-length, uninterrupted run of one coil from infeed to wrapped outfeed with the upend and strap transitions on camera.<\/li>\n<li style=\"margin-left:-1.25em;list-style-type:none\"><input type=\"checkbox\" disabled=\"disabled\" \/> Compare total cost and throughput against manual upending and pallet wrapping for your volumes.<\/li>\n<\/ul>\n<h2>FAQ<\/h2>\n<p><strong>Does the video prove the line &#8220;streamlines&#8221; slit coil packaging?<\/strong>\nNo. The footage demonstrates handling, upending in part, and wrapping, but contains no time study, no before\/after comparison, no throughput figure, and no labor data. The streamlining benefit is a supplier claim to verify with measured production data.<\/p>\n<p><strong>What machine brand is in the video?<\/strong>\nMostly inconsistent reads. &#8220;FHOPE&#8221; is legible on one wrapping machine, but other frames produce HOPE, TROPE, and FHOPEE-style garbles. Because the reads are not consistent, this review does not claim a machine model and names FHOPE only as the site and vendor behind the article.<\/p>\n<p><strong>Is the line automatic, and how is upending done?<\/strong>\nThe filmed shots show powered handling and wrapping, and a machine labeled &#8220;coil handling and upending machine&#8221; handles a coil, while other frames show vertical-coil handling and a turn station. Stills cannot prove the upend sequence is fully automatic or that the line runs unmanned; confirm the automation package and the upend\/strap sequencing with the supplier.<\/p>\n<p><strong>Does the line strap coils too?<\/strong>\nSteel strapping bands at a strapping station appear in a couple of frames, so strapping is visible but minor in this clip. Whether strapping is part of the delivered line, and its strap gauge\/grade and cycle, must be confirmed with the manufacturer.<\/p>\n<p><strong>What exactly does the footage show being processed?<\/strong>\nHorizontal slit steel coils (product identity by article context) being handled on conveyors and machines, upended\/turned at stations, and wrapped in clear\/yellow stretch film inside a factory hall, with a steel strapping station present and operators in only some shots.<\/p>\n<h2>Related reading<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fhopepack.com\/Automatic-Coil-Packing-Line\/\">Automatic coil packing line<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Coil_upender.html\">Coil upender and coil handling<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Steel-coil-wrapping-machine\/\">Steel coil wrapping machine<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Coil_packing_machine.html\">Coil packing machine<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/steel-coil-strapping-machinery\/\">Steel coil strapping machinery<\/a><\/li>\n<\/ul>\n<h2>Next step<\/h2>\n<p>If a slit coil handling, upending, and wrapping line fits your operation, turn the clip into a verification conversation: send your coil dimensions, weights, daily volumes, and whether strapping must be in the loop, and ask the supplier to confirm the measured data behind the &#8220;streamlining&#8221; and automation claims, the actual machine model and datasheet, the coil size\/weight range (including the upender&#8217;s capacity), wrapping speed and cycle time, film and strapping specifications, the control integration, power and footprint, and the real operator staffing \u2014 then request a full-length run with the upend and strap transitions on camera. Use the <a href=\"https:\/\/www.fhopepack.com\/videos\/contact-2\/\">contact page<\/a> to start that exchange and to arrange a live demonstration or factory visit, and verify every productivity and capability claim from the video with the manufacturer before you commit.<\/p>\n<p><strong>Published:<\/strong> 2026-09-19<\/p>","protected":false},"excerpt":{"rendered":"<p>Executive summary: This review covers a manufacturer clip behind the article titled &#8220;Inside the Shop Floor: Streamlining Slit Coil Upending, Handling, and Wrapping Automation&#8221; \u2014 a slit steel coil handling and packaging line in a [&hellip;]<\/p>","protected":false},"author":4,"featured_media":15398,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Slit Coil Upending, Handling & Wrapping Line","_seopress_titles_desc":"Video review of a slit coil upending, handling and wrapping line on the shop floor. Slit coil processing and throughput claims need verification.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[262,1159],"tags":[],"class_list":["post-15397","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-automatic-packing-line","category-coil-packing-line"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/15397","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=15397"}],"version-history":[{"count":2,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/15397\/revisions"}],"predecessor-version":[{"id":15415,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/15397\/revisions\/15415"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/15398"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=15397"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=15397"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=15397"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}