{"id":153,"date":"2018-04-17T09:13:57","date_gmt":"2018-04-17T09:13:57","guid":{"rendered":"http:\/\/www.fhopepack.com\/videos\/?p=153"},"modified":"2026-11-06T09:54:16","modified_gmt":"2026-11-06T09:54:16","slug":"economic-cable-coil-packing-machine-wire-wrapping-machine","status":"publish","type":"post","link":"https:\/\/www.fhopepack.com\/videos\/economic-cable-coil-packing-machine-wire-wrapping-machine\/","title":{"rendered":"Economic Cable Coil Packing: FPCA-200 and FPCA-300 Ranges"},"content":{"rendered":"<blockquote>\n<p><strong>Executive Summary<\/strong>\nPackaging engineers managing building wire, magnet cable, and conduit production lines face a structural trade-off between packaging speed, bundle containment, and material consumption. The FPCA horizontal eye-to-sky orbital wrapping series addresses this through dedicated rotating rings that feed packaging material directly through the coil eye while driven conical polyurethane rollers rotate the coil around its vertical axis. This guide provides exact engineering envelopes, physical overlap calculations, kinematic throughput figures, and utility requirements for the FPCA-200 and FPCA-300 lines, enabling procurement and plant engineering teams to validate equipment fit within 48 hours.<\/p>\n<\/blockquote>\n<iframe loading=\"lazy\" width=\"940\" height=\"535\" src=\"https:\/\/www.youtube.com\/embed\/aiuB-MBBjX0\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>\n<hr \/>\n<h2>Table of Contents<\/h2>\n<ul>\n<li><a href=\"#wrapping-cycle\">How the coil-wrapping cycle works<\/a><\/li>\n<li><a href=\"#models\">FPCA-200 and FPCA-300 model ranges<\/a><\/li>\n<li><a href=\"#overlap\">Overlap at OD and ID \u2014 why setting at the OD matters<\/a><\/li>\n<li><a href=\"#wrap-time\">Wrap time per coil<\/a><\/li>\n<li><a href=\"#film\">Film and packaging materials<\/a><\/li>\n<li><a href=\"#controls\">Controls and automation architecture<\/a><\/li>\n<li><a href=\"#safety\">Safety and regulatory standards<\/a><\/li>\n<li><a href=\"#checklist\">Engineering selection checklist<\/a><\/li>\n<li><a href=\"#faq\">Engineering FAQ<\/a><\/li>\n<li><a href=\"#next-step\">Next step<\/a><\/li>\n<li><a href=\"#related\">Related reading<\/a><\/li>\n<li><a href=\"#sources\">Sources<\/a><\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"wrapping-cycle\">How the coil-wrapping cycle works<\/h2>\n<p>The FPCA series wraps coils placed horizontally in an &#8220;eye-to-sky&#8221; orientation. The orbital ring rotates on a vertical plane, carrying a material shuttle through the open core of the coil, while motorized conical rollers index the coil about its central vertical axis:<\/p>\n<ol>\n<li><strong>Load and centre:<\/strong> the coil goes onto the coated conical rollers and guide rollers bring the section under the ring plane.<\/li>\n<li><strong>Clamp and wrap:<\/strong> a top pneumatic press-down cylinder descends on the coil face to stop hop and layer displacement while the ring accelerates under VFD and feeds film through the eye, the rollers turning the coil in step.<\/li>\n<li><strong>Cut and tuck:<\/strong> on semi-automatic units the operator cuts the web with a shielded blade holder; with the cut-and-clamp option a gripper catches the tail, severs it and smooths it onto the circumference.<\/li>\n<li><strong>Discharge:<\/strong> the press cylinder retracts to its home limit so the coil can be taken off.<\/li>\n<\/ol>\n<hr \/>\n<h2 id=\"models\">FPCA-200 and FPCA-300 model ranges<\/h2>\n<p>Machine frame selection depends strictly on the coil physical envelope, gross weight, and required material layer properties.<\/p>\n<table>\n<thead>\n<tr>\n<th style=\"text-align: left\">Engineering Parameter<\/th>\n<th style=\"text-align: left\">FPCA-200<\/th>\n<th style=\"text-align: left\">FPCA-300<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"text-align: left\"><strong>Coil Inner Diameter (ID)<\/strong><\/td>\n<td style=\"text-align: left\">150\u2013400 mm<\/td>\n<td style=\"text-align: left\">250\u2013510 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Coil Outer Diameter (OD)<\/strong><\/td>\n<td style=\"text-align: left\">250\u2013500 mm<\/td>\n<td style=\"text-align: left\">400\u2013900 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Coil Width \/ Height<\/strong><\/td>\n<td style=\"text-align: left\">80\u2013200 mm<\/td>\n<td style=\"text-align: left\">60\u2013300 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Allowable Coil Weight<\/strong><\/td>\n<td style=\"text-align: left\">2\u201350 kg<\/td>\n<td style=\"text-align: left\">20\u2013200 kg<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Installed Drive Power<\/strong><\/td>\n<td style=\"text-align: left\">2.0 kW<\/td>\n<td style=\"text-align: left\">2.4 kW<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Standard Electrical Service<\/strong><\/td>\n<td style=\"text-align: left\">AC 380V, 50 Hz (3-Phase)<\/td>\n<td style=\"text-align: left\">AC 380V, 60 Hz (3-Phase)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Ring Rotation Speed<\/strong><\/td>\n<td style=\"text-align: left\">10\u2013120 r\/min<\/td>\n<td style=\"text-align: left\">10\u201390 r\/min<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Cycle Time per Coil<\/strong><\/td>\n<td style=\"text-align: left\">20\u201330 s\/coil<\/td>\n<td style=\"text-align: left\">20\u201338 s\/coil<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Calibrated Overlap Range<\/strong><\/td>\n<td style=\"text-align: left\">20\u201380% (OD)<\/td>\n<td style=\"text-align: left\">10\u201390% (OD)<\/td>\n<\/tr>\n<tr>\n<td style=\"text-align: left\"><strong>Compatible Packaging Media<\/strong><\/td>\n<td style=\"text-align: left\">PE, Stretch Film, PVC<\/td>\n<td style=\"text-align: left\">LLDPE, PVC, PE Film, Crepe Paper<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><em>Note: For plants requiring automated inline handling, the FPCW series (FPCW-200, FPCW-300, and FPCW-400) integrates upstream coiling systems with dedicated easy-loading mechanisms. Parameters for 400-class rings and non-standard line voltages (e.g., 208V, 480V) are confirmed on a project-specific basis.<\/em><\/p>\n<hr \/>\n<h2 id=\"overlap\">Overlap at OD and ID \u2014 why setting at the OD matters<\/h2>\n<p>On a toroidal coil the ring advances the same axial distance per revolution, but surface travel grows with radius: the outer circumference is \u03c0 \u00d7 OD, the eye is \u03c0 \u00d7 ID. So the layer count accumulates by the ratio OD\/ID.<\/p>\n<p><strong>Example:<\/strong> ID 200 mm, OD 400 mm on an FPCA-200 gives a ratio of 2.0. With a 100 mm web at 50% outer overlap, the advance per revolution is 50 mm, giving two layers at the OD \u2014 and 2 \u00d7 2.0 = 4 layers at the eye, which is about 75% local overlap there.<\/p>\n<p>That asymmetry is why overlap is set at the outer diameter. Calibrating to the eye instead starves the OD and leaves the weak points and moisture paths where the coil takes its handling loads. The PLC therefore works in OD advance rates: 20\u201380% on the FPCA-200, 10\u201390% on the FPCA-300.<\/p>\n<hr \/>\n<h2 id=\"wrap-time\">Wrap time per coil<\/h2>\n<p>Cycle time is revolutions divided by ring speed, plus acceleration, deceleration and coil exchange. Revolutions come from geometry: OD circumference divided by the advance per revolution (web width \u00d7 (1 \u2212 overlap)).<\/p>\n<ul>\n<li><strong>FPCA-200:<\/strong> a 350 mm OD coil with a 100 mm web at 50% overlap advances 50 mm, so \u03c0 \u00d7 350 \u00f7 50 \u2248 22 revolutions. At 90 r\/min that is about 14.7 s of wrapping; with loading and unloading the cycle lands in the published 20\u201330 s band.<\/li>\n<li><strong>FPCA-300:<\/strong> a 700 mm OD coil with an 80 mm web at 60% overlap advances 32 mm, so \u03c0 \u00d7 700 \u00f7 32 \u2248 69 revolutions, about 59 s at 70 r\/min; a 450 mm OD coil at 90 r\/min wraps in roughly 16 s, inside the 20\u201338 s band.<\/li>\n<\/ul>\n<p>These are worked examples, not guarantees \u2014 real times depend on the recipe and the operator.<\/p>\n<hr \/>\n<h2 id=\"film\">Film and packaging materials<\/h2>\n<p>FPCA friction-braked shuttles adjust web release tension to run different packaging media without stretching films past yield limits or tearing non-elastic papers:<\/p>\n<ul>\n<li><strong>LLDPE Stretch Film (17\u201335 \u00b5m):<\/strong> Primary solution for commercial building wire. Provides elastic recovery, puncture resistance, and complete optical transparency for barcode scanning.<\/li>\n<li><strong>Polyvinyl Chloride (PVC) Film:<\/strong> Rigid, high-clarity wrapping with high surface gloss. Offers mechanical resistance against jagged conductor ends in building cable segments.<\/li>\n<li><strong>Polyethylene (PE) Flat Film:<\/strong> Cost-effective environmental protection against dust and liquid splash during containerized transit.<\/li>\n<li><strong>Crepe Paper Tape (FPCA-300 Exclusive Compatibility):<\/strong> Heavy industrial cables, bare copper coils, and subsea umbilical segments often require mechanical abrasion resistance and breathability. The 2.4 kW drive on the FPCA-300 maintains controlled torque under the higher web tensions required for crepe paper and woven synthetic tapes up to 200 kg gross coil loads.<\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"controls\">Controls and automation architecture<\/h2>\n<p>The FPCA series runs on an industrial PLC platform connected to a high-contrast operator HMI:<\/p>\n<ul>\n<li><strong>Dual Inverter Synchronization:<\/strong> The orbital ring drive and the conical roller drive are operated by dedicated inverters. Modifying the speed ratio digitally scales the OD overlap percentage without mechanical gear swaps.<\/li>\n<li><strong>Controlled Inverter Acceleration:<\/strong> S-curve frequency ramp-up prevents high starting torque from slipping the polyurethane drive wheels against the cast steel ring track.<\/li>\n<li><strong>Index Proximity Sensing:<\/strong> Proximity switches detect ring rotation, bringing the material shuttle to a repeatable stop position at the operator access point at cycle end.<\/li>\n<li><strong>Recipe Management:<\/strong> Operators can save target parameters (ring r\/min, roller ratio, target overlap) for common coil SKU numbers, holding product changeover times under 30 seconds.<\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"safety\">Safety and regulatory standards<\/h2>\n<p>A ring turns at speed with pinch points at the rollers, so access has to be closed:<\/p>\n<ul>\n<li><strong>Fencing:<\/strong> sheet-metal and mesh enclosures keep hands out of the orbital path while the machine runs.<\/li>\n<li><strong>Interlocks:<\/strong> access doors carry dual-contact switches that remove power from the ring motor when opened.<\/li>\n<li><strong>Foot control:<\/strong> the cycle is started from a shrouded foot switch, keeping the operator&#8217;s hands and body outside the rotating plane.<\/li>\n<li><strong>Basis:<\/strong> construction and risk mitigation follow ISO 12100 and the EN 415-10 packaging-machinery framework, with guarding confirmed by the site risk assessment.<\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"checklist\">Engineering selection checklist<\/h2>\n<p>Six parameters decide the specification:<\/p>\n<ol>\n<li><strong>Dimensions:<\/strong> smallest ID, largest OD and maximum stack height across every SKU.<\/li>\n<li><strong>Eye clearance:<\/strong> the minimum coil ID must clear the shuttle plus the ring width, with margin.<\/li>\n<li><strong>Weight:<\/strong> 50 kg on the FPCA-200, 200 kg on the FPCA-300.<\/li>\n<li><strong>Film or paper:<\/strong> LLDPE, PVC, PE or crepe paper \u2014 it sets the shuttle tension brake design.<\/li>\n<li><strong>Throughput:<\/strong> coils per hour, which decides between semi-automatic cutting and the fully automatic FPCW inline machines.<\/li>\n<li><strong>Utilities:<\/strong> voltage, 50 or 60 Hz, and air at 0.5\u20130.7 MPa.<\/li>\n<\/ol>\n<hr \/>\n<h2 id=\"faq\">Engineering FAQ<\/h2>\n<p><strong>Q: Can an FPCA-200 take a 220 mm ID, 480 mm OD, 45 kg coil?<\/strong>\nA: Yes \u2014 ID, OD and weight are all inside the FPCA-200 window of 150\u2013400 mm ID, 250\u2013500 mm OD and 50 kg.<\/p>\n<p><strong>Q: When do you move up to the FPCA-300?<\/strong>\nA: When OD passes 500 mm (up to 900 mm), weight passes 50 kg (up to 200 kg), ID passes 400 mm, or when crepe paper is the wrap and the 2.4 kW drive is wanted.<\/p>\n<p><strong>Q: Why does film pile up in the eye?<\/strong>\nA: Because layer count scales with OD\/ID. The same passes cross the eye as the outer perimeter, so a high-ratio coil reaches 70\u201390% overlap at the eye when the OD is set to 20\u201350%.<\/p>\n<p><strong>Q: Do coils need strapping before wrapping?<\/strong>\nA: Not when they come off a tight modern take-up winder \u2014 the press roller holds the turns while the first film layers build containment.<\/p>\n<p><strong>Q: How is overlap adjusted?<\/strong>\nA: On the HMI, by the speed ratio between the roller inverter and the ring drive \u2014 no belt or sprocket change.<\/p>\n<hr \/>\n<h2 id=\"next-step\">Next step<\/h2>\n<ol>\n<li><strong>Submit Product Data:<\/strong> Send minimum\/maximum coil dimensions (ID, OD, width, weight), target throughput, and line power requirements to <strong>info@fhopepack.com<\/strong>.<\/li>\n<li><strong>Review Layout Drawing &amp; Proposal (24\u201348 Hours):<\/strong> Our applications team will return a machine layout drawing, calculated cycle times, shuttle clearance verification, and electrical schematics.<\/li>\n<li><strong>Factory Testing:<\/strong> Send sample wire coils to our manufacturing facility for wrap tightness verification, material consumption testing, and Factory Acceptance Testing (FAT).<\/li>\n<\/ol>\n<hr \/>\n<h2 id=\"related\">Related reading<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.fhopepack.com\/Cable-packing-machine\/\">Cable Packing Machine Solutions Overview<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Cable-packing-machine\/Cable-Coil-Wrapping-Machine-FPCA-200.html\">FPCA-200 Semi-Automatic Cable Coil Wrapping Machine<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/Cable-packing-machine\/Cable-coil-wrapping-machine-FPCA-300.html\">FPCA-300 Heavy-Duty Coil Packaging System<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/online-auto-cable-coiling-and-wrapping-machine\/\">Automatic Coiling and Wrapping Production Line<\/a><\/li>\n<li><a href=\"https:\/\/www.fhopepack.com\/videos\/hose-stretch-wrapping-machine-pipe-coil-packing-machines-4\/\">Hose and Plastic Pipe Orbital Wrapping Equipment<\/a><\/li>\n<\/ul>\n<hr \/>\n<h2 id=\"sources\">Sources<\/h2>\n<ul>\n<li>International Organization for Standardization: <a href=\"https:\/\/www.iso.org\/standard\/51528.html\">ISO 12100:2010 Safety of Machinery<\/a><\/li>\n<li>European Committee for Standardization: <a href=\"https:\/\/www.nen.nl\/en\/nen-en-415-10-2014-en-191845\">EN 415-10:2014 Packaging Machines Safety<\/a><\/li>\n<li>FHOPEPACK Technical Manual: <a href=\"https:\/\/www.fhopepack.com\/Cable-packing-machine\/\">FPCA Series Operational Guidelines<\/a><\/li>\n<\/ul>\n<p><strong>Last reviewed:<\/strong> 2026-11-05<\/p>","protected":false},"excerpt":{"rendered":"<p>Executive Summary Packaging engineers managing building wire, magnet cable, and conduit production lines face a structural trade-off between packaging speed, bundle containment, and material consumption. The FPCA horizontal eye-to-sky orbital wrapping series addresses this through [&hellip;]<\/p>","protected":false},"author":1,"featured_media":2333,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Economic Cable Coil Wrapping Machine: Specs and Overlap","_seopress_titles_desc":"Our FPCA cable coil wrapping machines: coil ID, OD, width and weight per model, 10\u2013120 r\/min ring, 18\u201338 s per coil, and how to set film overlap at the coil OD.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[{"_seopress_pro_rich_snippets_type":"none"}],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"site-sidebar-layout":"default","site-content-layout":"default","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"fifu_image_url":"","fifu_image_alt":"","footnotes":""},"categories":[32],"tags":[33],"class_list":["post-153","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-cable-packing-machine","tag-cable-coiling-packing"],"_links":{"self":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/153","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/comments?post=153"}],"version-history":[{"count":15,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/153\/revisions"}],"predecessor-version":[{"id":18278,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/posts\/153\/revisions\/18278"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media\/2333"}],"wp:attachment":[{"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/media?parent=153"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/categories?post=153"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fhopepack.com\/videos\/wp-json\/wp\/v2\/tags?post=153"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}