Tóm tắt điều hành: This page is for anyone shipping coiled hoses, pipes or cable reels, or adding a wrapping step before transport. It explains what a hose wrapping machine does, why the machine in the video wraps the coil with bubble film while an operator feeds and finishes it, and what to verify with a supplier before you commit. The video below shows the real workflow, and the photos on this page are product-library reference images, not stills from the clip.
Trên trang này: Trang này giúp bạn quyết định điều gì · What a hose wrapping machine does · Bubble film versus stretch film · Semi-automatic workflow · Những điều cần kiểm tra trước khi mua hàng · Video hiển thị nội dung gì · Danh sách kiểm tra xác minh của người mua · FAQ · Đọc liên quan · Bước tiếp theo
Trang này giúp bạn quyết định điều gì
A coiled hose or pipe has curved surfaces, a hollow centre and edges that rub in transit. A single sheet of film rarely survives the trip, so the choice of wrapping machine and wrapping material decides how the coil arrives. A hose wrapping machine winds protective film around a large coil while the coil turns, and the machine in the video shows the real workflow from load to hand finish.
This page turns that machine into questions you can ask a supplier: what coil diameters it accepts, what materials it can apply, how much of the cycle is automatic, and what safety devices it fits. The checklist at the bottom gives you a single request you can send as it stands.
What a hose wrapping machine does
A hose wrapping machine winds protective film around a large coiled product to protect it in storage and transit. The machine has a ring-shaped centre opening, and the coil sits in it while a rotating component turns and winds film around the coil’s surface.
In the video, the machine is a ring-style unit with a green painted steel body and orange safety guards around the rotating area. At the centre is a blue rotating drum with a ring-shaped opening, and the operator feeds the edge of a very large white roll of bubble film into the opening by hand. As the blue component rotates, the film winds steadily around the coil, layer over layer, until the surface is covered.
The dividing line between machine and operator is clear: the machine does the rotation and winding, and the operator handles loading, film feed and hand finishing. That is what makes it a semi-automatic machine rather than a fully automatic one.
The figures below show the same machine class in other installations.
Bubble film versus stretch film
The material matters as much as the machine. The video uses bubble film, and the cushioning structure is visible as the wrap builds up. For hoses and coiled pipes, that cushioning matters because a bubble layer absorbs the knocks of rough handling that plain stretch film would pass straight to the product.
Bubble film is the material shown here, but the machine family can often apply other materials. Stretch film gives a tight, transparent membrane; woven tape gives a tougher outer skin; and combinations are used for long sea freight. Which material suits your coil depends on how far it travels and how roughly it is handled, so state the material in your enquiry and confirm the machine applies it.
Semi-automatic workflow
Reading the video as a workflow, the cycle has five steps. The operator positions the coil in the ring, then feeds the film by hand into the opening against the rotating drum. The machine winds the film evenly around the coil, the operator tucks and smooths the film over the faces, and then presses the finished wrap down to secure it.
That split — machine rotation plus operator loading and finishing — is typical of semi-automatic coil packing. It keeps the heavy turning and winding off the worker while keeping human judgment at the start and end of each cycle. The trade-off is that a full cycle needs an operator present. So when you compare throughput with a fully automatic machine, ask what the semi-automatic cycle time is at your coil size.
Những điều cần kiểm tra trước khi mua hàng
The video shows the working principle, not a specification. Nothing on screen states capacity, coil sizes, cycle time, film data or safety devices, so those figures come from the supplier in writing. Start with six facts:
- Phong bì cuộn — maximum and minimum wrapping diameter and coil weight.
- Mức độ tự động hóa — manual load and finish versus automatic cut and tuck.
- Khả năng tương thích của phim — bubble film, stretch film, woven tape, or combinations.
- Thời gian chu kỳ — minutes per coil at your coil size.
- Kiểm soát và cài đặt — adjustable wrap overlap and film tension.
- Gói an toàn — how the ring stops when the operator is at the feed point, plus stops and guards.
Mỗi mục đều ảnh hưởng đến quyết định mua hàng. Danh sách kiểm tra bên dưới tóm tắt lại chúng thành một yêu cầu duy nhất mà bạn có thể gửi nguyên trạng.
Video hiển thị nội dung gì
What the video shows is the real workflow of a hose and pipe coil wrapping machine with bubble film. An operator in a light blue shirt stands beside the machine and feeds the edge of a very large white bubble film roll into the centre ring opening by hand. A blue rotating component turns, and the film winds steadily around the coil until the wrapped layer covers the surface.
Later the same machine is shown with a large flat ring-shaped workpiece in the centre, likely a cable reel or large coil. The operator drapes light blue bubble film over the top, pulls the edges down and smooths the film, then presses down to secure the finished wrap.
What the video does not show is just as important. It does not show rated capacity, maximum or minimum wrapping diameter, wrapping speed, machine dimensions, footprint or weight, or cycle time per coil. It does not show model name, power rating, voltage or frequency, control method, or any certifications. It does not show bubble film thickness or specification, and it does not show a finished-product output or unloading step.
It does not show an emergency stop, light curtain or interlock; the orange guards around the rotating area are the protection that is visible.
Các ghi chú quan sát trực tiếp từ các khung hình được lấy mẫu tuân theo một quy tắc: chỉ những gì có thể nhìn thấy mới được ghi lại, và không có gì được suy đoán từ âm thanh, bởi vì đoạn clip có nhạc nền và không có lời thuyết minh.
The machine has a green painted metal structure with orange metal safety guards made of vertical and horizontal bars around the rotating area. At the centre sits a large ring-shaped opening with a blue rotating cylindrical component used for winding, and rollers and guide devices are fitted to guide and tension the film.
No control panel, screen, buttons, indicator lights, emergency stop, light curtain, warning signs or interlocks were observed.
The product in the first stage is a very large semi-transparent white roll with visible bubble texture, larger in diameter than the operator is tall. In the second stage it is a large flat blue ring kept horizontal throughout.
Các hình ảnh trên trang này là hình ảnh tham khảo từ thư viện sản phẩm của nhà sản xuất, không phải là ảnh chụp từ video. Hình mờ trên trang web hiển thị trong video thuộc về video và không phải là tên máy.
Danh sách kiểm tra xác minh của người mua
| Hãy hỏi nhà cung cấp về | Vì sao nó quyết định việc mua hàng |
|---|---|
| Max and min wrapping diameter, coil weight | Whether the ring fits your coil mix |
| Mức độ tự động hóa | Manual load and finish vs automatic cut and tuck |
| Film types accepted | Whether your chosen material applies |
| Cycle time per coil at your size | How many coils per shift |
| Wrap overlap and film tension settings | Whether the wrap can be tuned to your product |
| How the ring stops at the feed point | Operator safety during hand feeding |
Gửi cho nhà cung cấp: Please confirm for a hose and pipe coil wrapping machine: (1) maximum and minimum wrapping diameter and supported coil weight; (2) the level of automation — manual load and finish versus automatic cut and tuck; (3) which film types the machine applies (bubble film, stretch film, woven tape); (4) cycle time per coil at our coil size; (5) whether wrap overlap and film tension are adjustable; (6) how the rotating ring stops when an operator is at the feed point, plus fitted stops and guards. Our coils are [product], outer diameter [X] mm, weight up to [X] kg.
FAQ
Máy có tự động quấn cuộn dây không? Partly. The video shows the rotating drum winding the film automatically, while the operator feeds the film and finishes the wrap by hand. Confirm the automation level for the model you are quoted.
Có thể dùng màng bong bóng thay cho màng co giãn được không? Yes, bubble film is the material shown in the video. Ask which other films the machine applies, and confirm your material in writing before ordering.
Một chu kỳ đóng gói diễn ra nhanh như thế nào? The video does not show a time. Ask the manufacturer for the cycle time at your coil size, because it depends on diameter and wrap overlap.
Đọc liên quan
- Máy đóng gói ống
- Máy đóng gói cuộn dây
- Máy quấn cuộn thép
- Máy quấn cuộn dây
- Máy đóng gói cuộn dây đồng
- Giải pháp quấn cuộn ống mềm và ống dẫn
Bước tiếp theo
Send the supplier your coil sizes: diameters, weights, and the film material you plan to use, and ask for the six verification figures from the checklist above.
Then confirm the automation level, because the video shows a machine where an operator feeds and finishes each cycle.
Then ask how the ring stops when an operator is at the feed point, since hand feeding is part of the workflow. Use the trang liên hệ để bắt đầu cuộc trao đổi đó.
Lần cuối cập nhật: 24/09/2026
Ngày xuất bản: 24/09/2026
